I used the rear wheel drive 3sge beams flywheel it brought the clutch closer to the clutch release bearing. You may have to buy the long release bearing collar or put a spacer to limit travel of cluch fork.
@@travisrosa6628 was there any problem with the starter engaging the beams flywheel? The reason I ask is because I'm pretty sure the beams fw is a smaller overall diameter than a 3sgte fw.
in the video its showing a w59 its the 5speed off the supra but it accually its the same as the noah, hilux, tacoma, preaty much avryting 2liter up manual 4x2 rwd, the others gearboxes are the r150 that its as strong but you can used for a lithe while and the bellhousings are interchangeble
hey thanks for watching now to answer your question yes 4age mount brackets have to be cut off the stock kp61 crossmember and move back a few inches to but get the 4age into the kp61 chasy so modification is a must its not a direct fit hope that answers your question
Thanks for the advice and also for your support of the channel thus far. As far as the clutch my wife actually was trying to do a nice thing and bought that for me years ago i know its not the best quality but at the same time we not really going for crazy power in the starlet less than 300hp just need it to look good sound good and most of all reliable as possible so i decided to give the clutch a shot later down the road we will upgrade it.
Good job wish i had this video 5 years ago.Thank you brother.
I used the rear wheel drive 3sge beams flywheel it brought the clutch closer to the clutch release bearing. You may have to buy the long release bearing collar or put a spacer to limit travel of cluch fork.
@@travisrosa6628 was there any problem with the starter engaging the beams flywheel? The reason I ask is because I'm pretty sure the beams fw is a smaller overall diameter than a 3sgte fw.
I used a3y bellhousing and starter with spacer
@@travisrosa6628 ah ok. With a w series?
@@zero_to_1000 Yes w series gearbox
Great vid guys.
Interested in more detailed info on trans and bellhousing used.
R150 Bell. With r150 trans?
damn, that thing is going to fly. you can drive and ill stand outside and make the video !
Hey bro love the build I’m doing a 3sgte swap into my 1977 Toyota corona. I was wondering what bellhousing and transmission are you running ?
in the video its showing a w59 its the 5speed off the supra but it accually its the same as the noah, hilux, tacoma, preaty much avryting 2liter up manual 4x2 rwd, the others gearboxes are the r150 that its as strong but you can used for a lithe while and the bellhousings are interchangeble
does 4age needs fabrication on mounts or its fit bolt , same question for backet.
hey thanks for watching now to answer your question yes 4age mount brackets have to be cut off the stock kp61 crossmember and move back a few inches to but get the 4age into the kp61 chasy so modification is a must its not a direct fit hope that answers your question
@@allanglesperformancegarage thanks mate thats the only detalied video on whole yt
Send those clutch parts to Action clutch so they can make you a proper kit. The xtd stuff isn't safe.
Thanks for the advice and also for your support of the channel thus far. As far as the clutch my wife actually was trying to do a nice thing and bought that for me years ago i know its not the best quality but at the same time we not really going for crazy power in the starlet less than 300hp just need it to look good sound good and most of all reliable as possible so i decided to give the clutch a shot later down the road we will upgrade it.