@@MJTiffPlumbing I love your vidoes and yep your right I use my ryobi wet and dry battery vacuum all the time in my dog grooming room it comes in handy
Hi Mark, Great film with plenty to learn for me, I don’t know too much about the macerators, the more I see you working on them, the more I now know. I’m looking forward to the burst pipe call out job, have a great week and take care, regards, Chris 👍👍👍
Great video as usual loving the content pal, as an apprentice it helps me to see what sort of things are out in the jobbing world as I work on site all the time 👍
Hi Mark, this video is well timed. I am quoting to replace a Saniplus macerator in an en-suite bathroom. Unit is going to cost around £700. That Grundfos sololift WC3 is half the price but will it do the same job as the saniplus? Only been plumbing for a year and this is the first time changing one of these so any advice on how they compare would be great 👍🏻🚽
My Sololift is giving me trouble with waste backing up the left inlet. Do you think it could be a problem with the non return flap you show at 9:35, or could it be explained by something else? (Can't say I'm looking forward to opening it and finding out though...) In any case, thanks for a good showcase!
@@MJTiffPlumbing I was literally keep watching and hope can see it till the end of the videos even you did mentioned about sneaky peek on Wednesday. Funny moment
Hi mark. Great videos as always. Just wondering when you ever fit a pipe interrupter can you show the process please. Your knowledge is the best I find. Many thanks.
Hi Mark, recently did macerator aswell, like for like on a Saniflo, not used a Grundfos before but might check them out, have done a small course on how to service macerators, but just prefer to swap em out, great content as usual mate, I also had the scammers pop up as you mentioned
Just getting into the video and it was finished😮 how quick 18 minutes goes really enjoyable vid looking forward to Wednesday's was that the chef of tv house you was in
Another great video showing another tricky job, thanks. Nice bit of skilful bending; I must admit to having to really heave on 22mm copper pipe to bend it, but remember as a teenager being able bend 3/4 using a spring over my knee! Have I become feeble or is copper much harder these days?
Top job mark I like the grundfoss sh*t pumps never had much trouble with them, try and keep away from macerators as they are always full of sh1 and knackered when I go to them. When you flushed the bog I was saying mark switch that spur on 😆😆
@@MJTiffPlumbing I'm torn I need to get a set for college all the tutorials are on these type but I really like the look of the monument master benders...
@@Tom_Plumb_PHS Im ordering these this week… www.plumb2u.com/rothenberger-pipe-bender-15-22mm-bag-19664-c2x33553647?gclid=Cj0KCQiAybaRBhDtARIsAIEG3km9ArGf5FZpJoQ2R50a7o5y_jeAWGaaWsA4Kx50c4o3hpIftJAPh7AaAliAEALw_wcB
Mark you had a problem with your knipex bix cutter I had the same problem you just need too change the blade they are in side the cutter behind the metal cutting bar undo the screw take out the metal block with the cutter in and fit a new blade
That nrv rubber flap be careful of them as they wear away I have one in my house and it did just what I said it took a month to get one posted from grundfos in Denmark to Ireland an absolute ball ache I bought 2 when I ordered to save the trouble waiting if it happens again but the grundfos sololifts are easy to service and dismantle quality made apart from the rubber flap😅
The mech coupler is causing zero issues so having it there is not a problem at all and I would of had to buy a length of pushfit as the off cut were not long enough… you wouldn’t do that when there is an easier way to sort it. Each to there own 👍🏼👍🏼
Nice content as per bud👍🏻 I’ve got to look at a pump in the next couple. Of weeks that is outside the property in some sort of chamber!, didn’t know if they were IP rated,any idea?
5:30 mate you need to get a crimper then 🤣. Do you have the milwaukee pipe cutter also great tool, you don't need but is great to have. Going to get myself another hover as not great swapping over from dry to wet etc.
@@MJTiffPlumbing Yea you said before you didn't think a crimper (press tool) wasn't your cup of tea but when you start press its hard to go back to soldering. Same as a battery hover who really needs one but when you have one it's great tool. Sorry should have been clearer.
Top video mate but from someone who sticks to gas, do you never wear gloves when mucking about with toilets? Made me feel a bit 🤢 when you had your hand down it 😂
@@MJTiffPlumbing I want a Plumbing Apprenticeship because that is the only way I can probably get into Plumbing but I don’t know if I will need anything like GCSEs or Experience or anything to get into a Plumbing Apprenticeship because I didn’t get anything like GCSEs or anything in School or College because of my disabilities I struggled like mad but if you don’t need anything to get into a Plumbing Apprenticeship. like you go into it without needing ANYTHING and they give you the experience then BRILLIANT I’ll definitely give it ago
HUGE THANKS TO EVERYONE WHOS SO FAR ENTERED THE GIVEAWAY…..
DRAW COMING NEXT SUNDAY……
Great video had a saniflo about 8 years now no trouble.
Stay safe.
Good going that..👍🏼👍🏼
Thank you for the regular uploads, right on time.
Thanks for watching mate…. Really appreciate everyone who supports the channel
Excellent work Mark, always enjoy watching the day to day plumbing 👍
Thanks mate
Great job as always mate.
Glad it fitted for you and you didn’t have to remove the toilet 👌🏼
Thanks mate…. Yer that saves alot of hassle to be honest
Nice video mark on the fitting of grunfoss pump nice and clean this time didn’t know you could connect basin waste also to them very interesting 👍
Thanks mate, yep it has 2 connections for that.
Love my milwaukee wet/dry hoover.. bought after you recommended it when you bought yours.. Great for all jobs
Handy tool isn’t it
Highlight of the week is watching these videos every wednesday and sunday and your instagram is alsways great to see! keep up the great work!!!
Thanks Ethan….🙏🏼🙌🏼
@@MJTiffPlumbing I love your vidoes and yep your right I use my ryobi wet and dry battery vacuum all the time in my dog grooming room it comes in handy
Great video as always mark, keep them coming
Cheers buddy
Hi Mark,
Great film with plenty to learn for me, I don’t know too much about the macerators, the more I see you working on them, the more I now know.
I’m looking forward to the burst pipe call out job, have a great week and take care, regards, Chris 👍👍👍
Oohhhhh….. you stayed for the sneek peek at the end 😉😉
@@MJTiffPlumbing yep, I always see it through to the last second, cheers 🍻👌👍👍
Good one again Mark loved it happy days
Thanks mate as always 👍🏼👍🏼
Part of my Sunday ritual now at this stage once 6 o clock comes 😂 great video mark always great content
Thanks mate 👍🏼👍🏼
Another cracking vid Matt, also liked the sneak peak. Keep it up buddy 👍👍👍👍
FIRST ONE TO COMMENT ABOUT IT 😉😉🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼
Great channel very informative as i work in drainage, keep it up mate
Thanks mate👍🏼👍🏼
Not fitted one of those for a few years . I don’t miss em !
I know what you mean….
Very interesting video & like how professional you are at such jobs and stay safe 👍🏼
Thanks mate
Another great video. Glad to see your benders are as stiff as mine!! Keep up the great work
Hahahaa they need some WD40 on them
Another cracking vid Mark.
Thanks mate
Thanks mate.very useful 👍
Thanks mate👍🏼👍🏼
The grunfoss pumps look decent Mark, ok when fitting new ones I suppose, tidy job as always. 👍🚽
Thanks Peter…. Yer much prefer swapping them 😉
Great video as usual loving the content pal, as an apprentice it helps me to see what sort of things are out in the jobbing world as I work on site all the time 👍
Glad you enjoyed it mate 👍🏼👍🏼
How long do macerators tend to last?
Hi Mark, this video is well timed. I am quoting to replace a Saniplus macerator in an en-suite bathroom. Unit is going to cost around £700. That Grundfos sololift WC3 is half the price but will it do the same job as the saniplus?
Only been plumbing for a year and this is the first time changing one of these so any advice on how they compare would be great 👍🏻🚽
Depends what it’s got to pick up mate, this will be a toilet and 2 others, double check on there website 👍🏼👍🏼
My Sololift is giving me trouble with waste backing up the left inlet. Do you think it could be a problem with the non return flap you show at 9:35, or could it be explained by something else? (Can't say I'm looking forward to opening it and finding out though...)
In any case, thanks for a good showcase!
I would say it’s the non return valve failed mate
Just took a look and got a nasty surprise (forgot to drain the pump first).
I'd say you were bang on though...
They are not nice inside are they🤢
hi M.J We was waithig for you to do the load on test .. lol spoilsport
Hahahah 🤣🤣🤣
Nice video and don’t know why I was so into the Hero without Cape video till I thought it will be on tonight… 😂 gonna catch it on Wednesday night then
Hahahaa….. you stool around for the after credits
@@MJTiffPlumbing I was literally keep watching and hope can see it till the end of the videos even you did mentioned about sneaky peek on Wednesday. Funny moment
Hi mark. Great videos as always. Just wondering when you ever fit a pipe interrupter can you show the process please. Your knowledge is the best I find. Many thanks.
Another cracking video, keep it up buddy 👍😁
Thanks Miles
Another great video , keep up the good work 👍
Thanks mate 👍🏼👍🏼🙌🏼
Good job Mark
Thanks mate
Hi Mark, recently did macerator aswell, like for like on a Saniflo, not used a Grundfos before but might check them out, have done a small course on how to service macerators, but just prefer to swap em out, great content as usual mate, I also had the scammers pop up as you mentioned
Yep I wouldn’t want to be opening them up to much 🤢🤢
Just getting into the video and it was finished😮 how quick 18 minutes goes really enjoyable vid looking forward to Wednesday's was that the chef of tv house you was in
Thanks mate 👍🏼👍🏼
Another great video showing another tricky job, thanks.
Nice bit of skilful bending;
I must admit to having to really heave on 22mm copper pipe to bend it, but remember as a teenager being able bend 3/4 using a spring over my knee! Have I become feeble or is copper much harder these days?
Hahaha yep spring bending was the way back in the day
Top job mark I like the grundfoss sh*t pumps never had much trouble with them, try and keep away from macerators as they are always full of sh1 and knackered when I go to them. When you flushed the bog I was saying mark switch that spur on 😆😆
Hahahaa well spotted mate… just in time
Tight squeeze working them benders in a narrow little cloakroom. Looks good though very informative video. 👍
Oh mate, especially when they need some WD40 on them🤣
@@MJTiffPlumbing I'm torn I need to get a set for college all the tutorials are on these type but I really like the look of the monument master benders...
@@Tom_Plumb_PHS
Im ordering these this week…
www.plumb2u.com/rothenberger-pipe-bender-15-22mm-bag-19664-c2x33553647?gclid=Cj0KCQiAybaRBhDtARIsAIEG3km9ArGf5FZpJoQ2R50a7o5y_jeAWGaaWsA4Kx50c4o3hpIftJAPh7AaAliAEALw_wcB
Nice one mark 🙌🏻🙌🏻
Thanks mate 🙌🏼🙌🏼
Loving your videos
Thanks mate
Like me I tend to carry solvent weld but I do have a bag with a handful of push fit fittings though they’re never the ones I want 😂
Yep good idea mate
Mark you had a problem with your knipex bix cutter I had the same problem you just need too change the blade they are in side the cutter behind the metal cutting bar undo the screw take out the metal block with the cutter in and fit a new blade
Tried a new blade mate and still the bloody same🙈
That nrv rubber flap be careful of them as they wear away I have one in my house and it did just what I said it took a month to get one posted from grundfos in Denmark to Ireland an absolute ball ache I bought 2 when I ordered to save the trouble waiting if it happens again but the grundfos sololifts are easy to service and dismantle quality made apart from the rubber flap😅
Yer they are spot on units
I've got to ask , why didn't you renew the elbow with a mechanical one so there's not 2 fittings ?
The mech coupler is causing zero issues so having it there is not a problem at all and I would of had to buy a length of pushfit as the off cut were not long enough… you wouldn’t do that when there is an easier way to sort it.
Each to there own 👍🏼👍🏼
loving the shit storm inside yer van mate
Was only the back thank god… Bog in a Box got thrown in
Nice content as per bud👍🏻 I’ve got to look at a pump in the next couple. Of weeks that is outside the property in some sort of chamber!, didn’t know if they were IP rated,any idea?
I don’t think they are 😬
One benefit of Saniflo over Grundfos is (depending on where you live and the product) a 5-year guarantee rather than 2 years.
Good video.
Thanks mate
Good video mate. I hate it when I come across push fit waste pipe. Who buys that stuff 🤣
Hahahaa….. I know mate, I’m not a fan of it at all.
Infact I don’t think I’ve ever fitted it new…🤔
👍
👍🏼👍🏼
Are they the silent running version 😁🤣😁🤣
🤣🤣🤣
5:30 mate you need to get a crimper then 🤣. Do you have the milwaukee pipe cutter also great tool, you don't need but is great to have. Going to get myself another hover as not great swapping over from dry to wet etc.
Crimper???
@@MJTiffPlumbing
Yea you said before you didn't think a crimper (press tool) wasn't your cup of tea but when you start press its hard to go back to soldering. Same as a battery hover who really needs one but when you have one it's great tool. Sorry should have been clearer.
99% of plumbers here use push fit waste northern ireland you would rarely see solvent weld wastes
It was very popular years ago but here most people use solvent.
So strange how things vary so much in places
Top video mate but from someone who sticks to gas, do you never wear gloves when mucking about with toilets? Made me feel a bit 🤢 when you had your hand down it 😂
Loads of people say that…… if it was “soiled” I would but that was all clean to be honest mate
Imagine taking a dump on that at 2am 😅
Ssshhhhhh
Been there done that, or dumped that! 😁🇨🇦🇨🇦WFM
Hahaha 😉👍🏼👍🏼
those macerators sound really noisy? never had the pleasure to see one in operation in real life lol
Was more noisy as it’s in a little room I think…. But yer they are not silent
I hate it when baby wipes are wrapped around the blade 😭
Yep 🙈
🤘😎🤘👍👍👍👍👍👍
🙌🏼🙌🏼evening Wayne
@@MJTiffPlumbing Evening Buddy 👍👍
Have fun getting that old turd out of your milwaukee vacuum. 🤣
Hahaaa…. Thankfully it was all clean
Fitting new are always better than cleaning one out🤢😂. Hope you haven't got to carry that bog in a box to that house.
Your very brave mate,I wouldn't touch a saniflo without wearing gloves 🧤.
Nope, luckily I didn’t have to use the big in a box🙌🏼🙌🏼
I wish I had the things you need to be a Plumber because Plumbing is my Ultimate Dream Dream Dream Dream Dream Job
Everyone can do it mate….. just get out and do it
@@MJTiffPlumbing I want a Plumbing Apprenticeship because that is the only way I can probably get into Plumbing but I don’t know if I will need anything like GCSEs or Experience or anything to get into a Plumbing Apprenticeship because I didn’t get anything like GCSEs or anything in School or College because of my disabilities I struggled like mad but if you don’t need anything to get into a Plumbing Apprenticeship. like you go into it without needing ANYTHING and they give you the experience then BRILLIANT I’ll definitely give it ago
Saniflo fix
👍🏼👍🏼