This is my usual recommendation but it's out of stock currently for the xt-60 version (www.wolframrc.com/product/charger-adapter-cable-for-jst-ph-3p-atomic/279?cp=true&sa=false&sbp=false&q=true). You can get the parallel option and just charge one pack at a time (www.amazon.com/JST-PH2-0-Parallel-Battery-Charging-Tinyhawk/dp/B0CBQHSZBW). I just bought a xt-60 female connector and soldered an existing charging cable I had that came with 4mm banana plugs.
The link was broken on the second link. Btw, did you make this cable your self. If not where did you purchase it? Because i need one with banana plug. It will perfectly fit my old charger as it is.
The amazon link was basically for the same one on kenonhobby too (www.kenonhobby.com/PN-Racing-XT60-Plug-3xJST-PH-Parallel-Charging-Cable_p_46091.html). For me, I already had the charging cable for my jst-ph battery packs, but I needed to change out the banana connectors to xt-60 as seen in this video. If you want the banana plug ones, use the wolframrc link above and get that.
Hi there, I have a dead lipo but cant figure how to recover it with this charger... because if I swich to NIMH mode and I plug my lipo he somehow sees that the battery is a lipo and prevents me from charging.... any advice ?
After the power goes out at the input, is there such a thing that the charging process does NOT automatically resume, the device announces an error, and it is necessary to remove the error and press "start" again?
@@sammybaka I bought B6ACneo. If the power is lost and appears again, and the battery is connected, the charger goes into displaying the error logo, which in some cases can be removed with the button and select start again.
I bought this charger but i have 19.5v 160watts adapter when i plug it input voltage shows 19.50v and cut off 11v should i increase the cutoff voltage from 11 to 19v??
When using a wall charger i don't think the cutoff setting is important. It's needed when using a 3+s lipo battery as input power to b6neo to protect that supplying lipo.
This was helpful, thanks!
Thank you 👍
I have 10v and 40 watt is that okej?
40 watt is plenty. As long as the charger sees 10v or more, it will allow charging to start.
I might just go for this set up and charge my battery individually. Where can i get the cable like this? I can solder the xt60 just like you did.
This is my usual recommendation but it's out of stock currently for the xt-60 version (www.wolframrc.com/product/charger-adapter-cable-for-jst-ph-3p-atomic/279?cp=true&sa=false&sbp=false&q=true). You can get the parallel option and just charge one pack at a time (www.amazon.com/JST-PH2-0-Parallel-Battery-Charging-Tinyhawk/dp/B0CBQHSZBW). I just bought a xt-60 female connector and soldered an existing charging cable I had that came with 4mm banana plugs.
The link was broken on the second link. Btw, did you make this cable your self. If not where did you purchase it? Because i need one with banana plug. It will perfectly fit my old charger as it is.
The amazon link was basically for the same one on kenonhobby too (www.kenonhobby.com/PN-Racing-XT60-Plug-3xJST-PH-Parallel-Charging-Cable_p_46091.html). For me, I already had the charging cable for my jst-ph battery packs, but I needed to change out the banana connectors to xt-60 as seen in this video. If you want the banana plug ones, use the wolframrc link above and get that.
Does that charger do storage
Yes it does. Configurable amperage and target voltage.
Hi there, I have a dead lipo but cant figure how to recover it with this charger... because if I swich to NIMH mode and I plug my lipo he somehow sees that the battery is a lipo and prevents me from charging.... any advice ?
That's interesting. Unfortunately I don't have information on how to do this. The only time I recovered an under volted lipo was with another charger.
After the power goes out at the input, is there such a thing that the charging process does NOT automatically resume, the device announces an error, and it is necessary to remove the error and press "start" again?
This hasn't happened to me, but I imagine the charger reboots back into the main menu. I wouldn't expect it to resume charging automatically.
@@sammybaka I bought B6ACneo. If the power is lost and appears again, and the battery is connected, the charger goes into displaying the error logo, which in some cases can be removed with the button and select start again.
I bought this charger but i have 19.5v 160watts adapter when i plug it input voltage shows 19.50v and cut off 11v should i increase the cutoff voltage from 11 to 19v??
When using a wall charger i don't think the cutoff setting is important. It's needed when using a 3+s lipo battery as input power to b6neo to protect that supplying lipo.
Can it charge just by balancer port? I have a 3S deans battery pack
I just tested this. It won't charge with just the balance port plugged in.
@@sammybaka thx bro you just saved me a bad buy for me! 🙏
Glad to help!
What car is this?
That's a GL Racing GLR