How to set up SDR Trunk Part 2 (Programming a P25 Trunking System)

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 54

  • @shellreich
    @shellreich 2 года назад +4

    Had my dongles for a while trying other videos and other programs, but couldn't get P25 traffic. Watched your video and you explained it so well, that I can finally listen. Thank you!!

  • @smokey136
    @smokey136 4 года назад +7

    Thanks for these videos on sdrtrunk. Your doing a great job. I am Learning something new in everyone of these videos. 👍

  • @chasesambell369
    @chasesambell369 Год назад +3

    There is a trunked digital radio system in my area that is not listed in radio reference. Can you please post a video tutorial showing how I can find and decode it?

  • @robmorin
    @robmorin 3 года назад +9

    Great video! I seem to have everything working via premium account with RR, however i have no audio, even with LSM enabled. Any ideas what i am doing wrong?

    • @sonnyjlewis
      @sonnyjlewis 2 года назад

      Did you ever figure it out? I'm having the exact same problem.

    • @markabramovich875
      @markabramovich875 2 года назад

      I have the same issue. Please help if you got it working.

    • @thesoutherndonkey
      @thesoutherndonkey Год назад +1

      Did anyone figure this out? I know the comments are older but I have the same problem. Everything is working as it should but I have no sound.

  • @spectre66
    @spectre66 4 года назад +5

    Great quality instruction. Keep it up!

  • @omicron0mega
    @omicron0mega 2 года назад

    Greeting fellow Madison Countian. Very helpful vid for setting up my NooElec sdr's.

  • @JTIndica
    @JTIndica 3 года назад +3

    Very helpful! Thank you for your videos, I appreciate it.

  • @gotman4409
    @gotman4409 2 года назад

    For me your instructions we the best. Thanks for this. You did great !

  • @LycandersAim
    @LycandersAim 10 месяцев назад

    @2:34 What are the frequencies underneath the two control channels? I am guessing those are operating channels that the control channels handle traffic on? I do not need to monitor such channels in my scanning setup? Thank you for these videos, they are of great help.

  • @stevelee5893
    @stevelee5893 2 года назад

    You did a good job at this and I learned the best way from you. Thanks

  • @crsv7armhl
    @crsv7armhl Год назад

    Thanks for the great walk through!

  • @larryearlgosnell
    @larryearlgosnell 3 года назад +1

    Nice video. Followed your instructions and all seems to be working with the one dongle I have but no audio.

  • @lmidnight
    @lmidnight 2 года назад

    Great series! Thanks for the help.

  • @simpledog42
    @simpledog42 Год назад

    great tutorial, hackRF up and running no problems at all. Thanks!

  • @johnspace1876
    @johnspace1876 3 года назад +1

    Thanks for the tutorials! Quick question does this record two or more talk groups at the same time. I have it up and running, haven't noticed that yet.

  • @Tron0903
    @Tron0903 Год назад

    If I live in a small area how do I set this up with just one dongle

  • @brandonlane294
    @brandonlane294 Год назад

    How does the baseband audio recording work? I hit record on a talkgroup and on one of my sdr tuners. It saves a baseband wav file and mp3s of the recorded talkgroup convos but theres an option to setup a recording tuner and wants a previous baseband audio file to work. Whata the difference in having a recording tuner setup or just pressing record while listening. And what is baseband audio wav file and whats it used for? Tx

  • @CarstenBauer
    @CarstenBauer 2 года назад

    Thajks, starting to understand it a bit better. Next, how do you hear the radio calls? I'm guessing you need to run DSDPlus and input from the Vcable?

    • @MAndNGamesV3
      @MAndNGamesV3  2 года назад +2

      SDR trunk has the audio built in along with the decoder just start the system up from the playlist tab right click on the black panel with the speaker icon between the spectrum panel and the traffic panel and set your audio output to whatever you like and you should start hearing traffic make sure in the same area you right clicked to set up your audio you see green text or numbers popping up that means the program is receiving traffic and you should get audio if you don’t see anything either the system isn’t running or no one is talking

    • @CarstenBauer
      @CarstenBauer 2 года назад +1

      @@MAndNGamesV3 ahh ok so I don't need to pipe the audio into dsdplus or anything. That's cool. Thanks.

    • @MAndNGamesV3
      @MAndNGamesV3  2 года назад +1

      @@CarstenBauer yep SDR Trunk does it all within the program

    • @thesoutherndonkey
      @thesoutherndonkey Год назад +3

      I have everything working like it should but no matter what I do I get no audio. All the calls are coming in perfectly but no audio? Anyone else?

  • @peleritoorange1861
    @peleritoorange1861 3 года назад +1

    thank you sooooo much i needed to know how to do this

  • @EZtech
    @EZtech 2 года назад +1

    Thanks for making these videos! 👍
    Is there any way to lock onto an alias temporarily. For instance I'd the police are pursuing someone, can you quickly block out every thing else and just follow one alias? Thanks 👍

  • @stevenA44
    @stevenA44 2 года назад

    So I have a question. When I enter all the information into the channel/talk group I want, when I press play, the tuner shows in the boxes on the lower left, a frequency that is 0.025 below what I want to listen to. Why is it doing this? I want to listen to KSP in KY.

  • @boweryboys6673
    @boweryboys6673 2 года назад +1

    I've got a RadioRefrence premium account but for some reason it doesn't allow me to login from sdrtrunk. Also when i do everything manual i hear nothing

  • @shawnolson8222
    @shawnolson8222 4 месяца назад

    great job on the video

  • @TitusandTesla
    @TitusandTesla 2 года назад

    So as of now do we sdr enthusiasts have anything to combat encryption ? Thanks for the great videos

  • @pewtuber243
    @pewtuber243 11 месяцев назад

    How do you lock out talk groups

  • @danielji2742
    @danielji2742 3 года назад

    Do they use this tech for underwater subs?

  • @jjtiffe
    @jjtiffe 3 года назад

    radio reference the drop down box for state and county does not show anything all blank

  • @nightowl1966
    @nightowl1966 3 года назад

    I have sdrtrunk up and running. I also have unitrunker with dsd+. With unitrunker after I download from Radio Reference, it shows what I am listening to, Sheriff, fire etc. With sdrtrunk I need to enter an alias for each talkgroup I listen to? Or am I missing something? I also need to create a alias for everything I don't want to hear? I'd like sdrtrunk audio better than unitrunker, but seems more work setting it up.

    • @MAndNGamesV3
      @MAndNGamesV3  3 года назад

      You don’t have to put an alias to listen but the RR import feature will allow you to add talkgroups easily. You don’t have to create every singe TG to lock out what you don’t want to hear technically. Create an alias and add a Talkgroup range. Put the ranges you don’t want to monitor then select the lock out button

  • @kidda71
    @kidda71 3 года назад

    I have been trying to add a radio id Alias name, nothing seems to work.

    • @MAndNGamesV3
      @MAndNGamesV3  3 года назад +3

      Are you doing it via the RadioReference import or manually

    • @kidda71
      @kidda71 3 года назад +2

      @@MAndNGamesV3I got the talk groups from radio reference but cannot add radio id.

    • @MAndNGamesV3
      @MAndNGamesV3  3 года назад +3

      @@kidda71 Under the Alias name were you put the Talkgroup you should be able to name the RID or RID’s if that’s not working I’ll have to look around and see

  • @thesoutherndonkey
    @thesoutherndonkey Год назад

    Anyone on here ever figure out the no audio problem? Everything works as it should. I can see all the calls coming through but there is no sound. I am monitoring P25-1 no encryption. I have tried everything with no audio. If I put in a random frequency and hit play I can hear static so the sound works on pc. I don’t get it?

    • @AgentWonderbread45
      @AgentWonderbread45 Год назад

      Did you figure it out? Look in your user preferences under audio and make sure you have your speakers selected. There is a test button there to make sure you are getting audio on the different options if its good u will hear a beep.

    • @MrThegza11
      @MrThegza11 Месяц назад

      I am having this problem. I can hear the beep with the audio test fine. Receiving signals, just cant hear anything

    • @thesoutherndonkey
      @thesoutherndonkey Месяц назад +1

      @ My problem ended up being that I only had one SDR. After I started using 2 SDR’s my problem was solved.

  • @sergey789
    @sergey789 3 года назад

    Is it possible to do an nxdn system

    • @MAndNGamesV3
      @MAndNGamesV3  3 года назад +2

      Unfortunately the program at this time does not support NXDN

  • @ManuelPinner
    @ManuelPinner Год назад +1

    I have a SDR Play RSP DX and a Adalm Pluto SDR!

  • @danaf621
    @danaf621 3 года назад

    new at this great video helped me a lot can you save the info as a pdf

  • @BDBee81
    @BDBee81 2 года назад

    Well done dude >8-D

  • @xjohn1970
    @xjohn1970 3 года назад

    need a faster computer

  • @ramblinred1
    @ramblinred1 Год назад

    Well, your audio is better on this one but I can't keep up with you. You're all over the place and barely explain anything.

  • @nol_yaw
    @nol_yaw 7 месяцев назад

    do u have a email i need some help with my sdrtrunk thanks

  • @compuman2011
    @compuman2011 4 месяца назад

    There is a trunked digital radio system in my area that is not listed in radio reference. Can you please post a video tutorial showing how I can find and decode it?