You've never seen a dent pulling tool like this! Easy Fix for door dings in minutes!

Поделиться
HTML-код
  • Опубликовано: 14 дек 2024

Комментарии • 968

  • @XSAoRAD
    @XSAoRAD 4 года назад +127

    How many other PDR techs have had this pop up in their recommended feed suddenly?

    • @StoneyRidgeFarmer
      @StoneyRidgeFarmer  4 года назад +81

      Evidently that's why I'm getting so many "pros" ripping into me...man it's a DIY setup and in no way compares to what a pro does...hopefully you guys all understand that this is for the DIY guy....on an 11 year old car...we're just making some improvements. Thanks so much for your comment and for keeping it positive..I appreciate ya brotha

    • @XSAoRAD
      @XSAoRAD 4 года назад +22

      @@StoneyRidgeFarmer I understand you're just having a go for fun and that's all good.
      The issue is 'customers' watch these videos, and start thing "well all you gotta do is glue one of those suction things and foooomp! Out it comes".
      The last few years, we keep getting people trying to tell us how easy it is, or that they got most of it out for us but can't get the last little bit.
      Again that's not your fault, but sometimes RUclips is a curse for us.

    • @danielvodo1
      @danielvodo1 4 года назад +9

      @@XSAoRAD exactly. The most annoying thing is having to repair people issues after they mangle a dent. Or sometimes pull the paint which means a respray in some instances. These kits are dumb. As for that dent in the video. It's definitely volcanoed and there really wasnt much progress from the first pull as is expected if you don't know what you're doing. This kit is only worth it if you don't care about your car and it's and old bomb that you just want to improve a little bit

    • @hikaruichicho9054
      @hikaruichicho9054 3 года назад +6

      Another PDR tech here. I do have to agree with the other comments in that this tool gives a false sense of ease that can get a lot of people in trouble. Almost always when I glue pull something it leaves the dent high. and unless you know how to "knock" the dent back down flat you almost always end up with a half high, half low mangled mess. Sometimes you can't fix that kind of stuff either. So i guess if you're bored and have $60 and a few hours to spend starting a skill that takes years to develop on your ride of unknown value, then more power to ya, just don't be mad when the pdr guy charges you more to fix your mistakes, if he can.

    • @pramodkhode9387
      @pramodkhode9387 3 года назад

      @@StoneyRidgeFarmer 7

  • @crookassassin
    @crookassassin 3 года назад +441

    Good video... Just a quick note to other DIY users. You should start move down in tip size as the dent begins to reduce in diameter otherwise you're pulling on metal that has already popped out...which can sometimes create a 'high'...not what you want.

  • @cabforwardooo9983
    @cabforwardooo9983 4 года назад +21

    A buddy of mine put a bunch of small dents in the side of his Subaru, and I told him to check out paintless dent removal. He didn't listen and had the dents filled and they practically painted half his car. It doesn't look right. This shows the right way to fix dents! Nice video!

  • @shepherdgirl2061
    @shepherdgirl2061 4 года назад +9

    I have a 1984 Mercedes 300 SD diesel. It has MULTIPLE dents it was in a hale storm. A body shoppe wanted 1000's to do body work. I think you just solved my problem, THANK YOU!!!

  • @lindafoxwood78
    @lindafoxwood78 Год назад +4

    Bought a Honda 2014 Civic May 1 2023 for $5500 cash from a car dealer with 200K miles. The biggest issue was DENTS and DINGS! SO supper glad I am watching your video! I get the body looking cool, I will feel like a million dollars. :)

  • @sammyday3341
    @sammyday3341 Год назад +6

    Excellent presentation! You convinced me to buy this device. I LOVE my 2007 Honda Element and it has several small dents from door dings. Bought it new and it now has 375,000 miles. The only repairs were replacing the AC condenser fan and the driver’s side window regulator, both of which I did myself.

  • @EnligUlv
    @EnligUlv 2 года назад +1

    Just paid off my 2018 Subaru Crosstrek. Kept it flawlessly dent free while living in CO until about a year ago when we relocated to crowded CA and my wife began making weekly trips to San Francisco parking in these high rise parking structures. Now there’s a quarter sized dent in each rear door. Since I’m keeping it, think I’ll buy this kit and give it a whirl.

  • @HaveAnother775
    @HaveAnother775 2 года назад +4

    Perfect timing! was doing some across the street, over the tree, around the bush basketball trick shot and nailed my brand new 2022 trail boss..we all laughed..and then i saw it...im gonna give this a shot and re-comment after the results! awesome job

  • @bondpit8750
    @bondpit8750 4 года назад +12

    Paid for itself with the 1st dent. But like any tool, the results are in the hands of the user. Great job finessing!

  • @Scruffy1000
    @Scruffy1000 4 месяца назад +3

    Many thanks for putting this up, I’ve had a small ‘shopping trolley’ dent in my door for ages and your film has finally given me the confidence to have a go !
    Thanks again.
    Richard, (in the UK)

  • @canadiantimberwolf1
    @canadiantimberwolf1 Год назад +2

    3 years ago, this was done. August 20th roughly, we just had a storm that sent down golf-ball-sized hail and placed a few good dents in my SUV. I was looking at Amazon and now I know more about what to look for and do, thank you and I subscribed and hit the like button. Take care...

  • @adriansalazar4537
    @adriansalazar4537 4 года назад +4

    why did it take me this long to find this video, I hate my deductible being so much to pay, I'm buying this kit thanks so much for explaining how to use all the tools I'm doing this!!!

  • @agapepz4111
    @agapepz4111 Год назад +1

    Listen man. I like how positive you are and how you present yourself as good man. Keep it please with this tone. Wish you all the best with your channel.

  • @mb3775
    @mb3775 2 года назад +10

    I've watched several of these but you were the most successful. I think you were more patient than the others and slowly eased out the dent while the others rushed it a bit. I bought a kit and hope to have success as well. I think ill probably add a heat gun to warm the metal also.

  • @rodb3653
    @rodb3653 Год назад +1

    Thanks for the YT vid, brutha. I happen to own a low mileage 04 Element with a few door dings. I was able to make them look better by 70% with the dent puller suction cups sold on Amazon. I ordered a different dent puller kit w/gun.

  • @Zomsky
    @Zomsky 4 года назад +20

    I’ve seen that thing advertised online, thought it was a gimmick! Genuinely surprised it worked so well

    • @JonMiller84
      @JonMiller84 4 года назад +2

      Dont be fooled you can definitely damage your car worse if you dont know what your doing. Im a 12 year tech and idiots using these kits and calling us when it doesnt go right is a nightmare and we charge more to clean up the mess they make of the metal attempting it

  • @mainecrab
    @mainecrab 4 года назад +10

    Used a similar slide hammer puller with glue sticks to pull out a nasty dent on the front of Tahoe before I sold it . It's definitely awesome and little addicting once you get one of them out.

  • @richardross7219
    @richardross7219 4 года назад +33

    I bought a set from Walmart on sale last year. I pulled a 6" x 5" x 1" deep dent out of a rear quarter on a Taurus. It took many pulls and went through a lot of glue sticks but it was worth it. It is fun to pull the dents.

    • @primetheory258
      @primetheory258 3 года назад +1

      How did you got they glue off

    • @richardross7219
      @richardross7219 3 года назад +3

      @@primetheory258 Read the directions carefully. I had to scrape most of the glue off with the plastic scraper in the kit. Them sprayed 90% rubbing alcohol on and rub with a soft cloth. Good Luck, Rick

    • @primetheory258
      @primetheory258 3 года назад +2

      @@richardross7219 thank you. I appreciate ya.

  • @rep001
    @rep001 2 года назад +1

    awesome review thanks for your time. Im UK based but will get one of those kits and get after it on my old Boxster..Cheers!!

  • @nofortunatesonII
    @nofortunatesonII 9 месяцев назад +14

    Price is $79.99 now in March of 2024. I should have found your video 4 years ago. Thanks for posting.

    • @StoneyRidgeFarmer
      @StoneyRidgeFarmer  9 месяцев назад +2

      inflation is real...that's for sure!

    • @Danandsan44
      @Danandsan44 8 месяцев назад +1

      I just bought mine for $16 online.

    • @nofortunatesonII
      @nofortunatesonII 8 месяцев назад

      @@Danandsan44 Where did you find it for that price?

    • @Danandsan44
      @Danandsan44 8 месяцев назад +1

      @@nofortunatesonII I bought it online via an app called Lazada. The item is from China and I’m in Singapore(south east Asia) so I’m not sure if it will deliver to your country. You can give it a try.

    • @nofortunatesonII
      @nofortunatesonII 8 месяцев назад +1

      @@Danandsan44 Thank-you for the reply and info.

  • @fnk101
    @fnk101 2 года назад +1

    Thanks watching from London uk

  • @raymondgranvold7702
    @raymondgranvold7702 2 года назад +8

    Nicely done. It’s ALWAYS appreciated to see real people do real DYI. Thanks!

    • @speterg2
      @speterg2 Год назад

      What does DYI mean?

    • @basesperanca
      @basesperanca 9 месяцев назад

      @@speterg2 do yourself it :)

  • @jxke
    @jxke 4 года назад +69

    Only use a little bit of glue to hit the center of the dent. Not enough to cover the whole dent. That way the glue pulls the inner most part of the dent out.

    • @marlonagregersen1384
      @marlonagregersen1384 4 года назад +2

      Thank you, that did help. The dimple is still very small. It's on a microwave, I'd love to know if you got your dents completely out?

    • @Dsoginventor
      @Dsoginventor 4 года назад +2

      You’d think this would be obvious, but evidently not. I’ve watched a few of these and it seems like most guys put on more glue than there is dent.

    • @dariohernandez9167
      @dariohernandez9167 3 года назад +3

      @@DsoginventorUsually because the directions state to put a lot of glue to cover the pull thing, these people don't even know how to use their own product.

  • @Olddirtytiger
    @Olddirtytiger День назад +1

    Well done, i also have a Honda and got a fresh dent , I'll give this a shot

  • @kevchard5214
    @kevchard5214 4 года назад +16

    Josh those dent pulling kits work better in 80+ temperatures. Warm metal or aluminum will fall back into shape easier.

  • @rossmartens
    @rossmartens 2 года назад +1

    I'm about to embark on hail damage nice seeing a guy do it like you did looks simple enough

  • @cmackscott761
    @cmackscott761 4 года назад +15

    This is our exact car, right down to the model and color. I did autobody and paintwork professionally for over 20 years when I was younger. Our Element has a few annoying dings just like this car. I was aware of these dent removal took kits. Great to see one demonstrated so well. The cost and time involved in fixing these dings the old-school way would be ridiculous.

  • @stevewales4380
    @stevewales4380 2 года назад +1

    Brilliant video, just what I need , Thanks from Spain.

  • @ghostproductions1832
    @ghostproductions1832 4 года назад +3

    I have been using tactics removing dents for a really long time which is why i went to an automotive school but this is easier with the right gadget. Nice job 👍🏼

  • @louistorres
    @louistorres Год назад +1

    Use alcohol and not that orange tool. I just bought the kit and wanted to browse around for videos and this is a great one. Thanks for posting this.

  • @vwbug1975
    @vwbug1975 3 года назад +2

    Harbor Freight has a similar kit for $15 and it worked well for the dents on my cars

  • @Shamus71
    @Shamus71 Год назад +2

    I’m getting this kit. This is a great video. Thank you.

  • @robharryman2054
    @robharryman2054 4 года назад +8

    Awesome video sir! I bought a kit similar to yours before finding your channel. Except my kit didn't have a slide hammer, so I found another kit with one. I think I spent $35 total. I bought a 2019 truck with hail damage on passenger side. I assumed a lot of the dents would disappear in the hot sun of July-August, but that didn't happen. I figure my 15 year kid can assist or even do some of the work vs spending several thousands for local shop to do the work, plus we will have gained knowledge and experience. Thanks again for the video!

    • @YoureNowOnTV
      @YoureNowOnTV 2 года назад +2

      How did the project work out for you? 😉

  • @marlonagregersen1384
    @marlonagregersen1384 4 года назад +1

    Ok I bought it and it worked for the most part. There is still a little dimple I can't get out, tried numerous times. This is on my microwave so it was bothersome when I dented it. I must say, the dimple is sooo small it's hard to notice. You really have to look. I tried to remove a dent from our truck door, it's going to take a bit more work will update later. Hate how the glue sticks to some of the tabs, extremely hard to pull off. The blue tabs are the easiest to pull glue off. Was worth the purchase.

  • @ES44AC-2
    @ES44AC-2 4 года назад +25

    That worked way better than I expected! Thanks for the review.

  • @DarkStar-wu9nq
    @DarkStar-wu9nq Год назад +2

    Good honest videos as the glue kept coming off mine . I had to walk from the kitchen to the car so that didn’t help I will try doing it closer next attempt

  • @I-AM-DaNiEL43
    @I-AM-DaNiEL43 6 месяцев назад +4

    The video is 4yr + old.. but 🏆 outstanding job in making this video with simple instructions & details. Thank u

  • @ferdinandalexander8053
    @ferdinandalexander8053 Год назад +1

    I have a 2010 Element the same color and I just purchased the Eastwood kit. Very helpful video. Thank you!

  • @patrickallen5781
    @patrickallen5781 4 года назад +9

    As you gradually pull the dent out use a smaller diameter tip. This will speed up your progress. Great video

  • @pete5534
    @pete5534 Год назад +1

    I’m not sure what the ‘best’ year(s) of Elements are but as far as curb appeal goes, it looks like you’ve scored a winner.

    • @StoneyRidgeFarmer
      @StoneyRidgeFarmer  Год назад

      paid through the nose for it...but only 60k miles on a 2009 is priceless...this vid is several years old and I've driven it every day since!

  • @Anonymous-it5jw
    @Anonymous-it5jw 4 года назад +31

    Nice video, thanks for sharing. Try using 99% rubbing alcohol to make the glue release without using the plastic chisel; also, push the tabs and hot glue into the finish a little more to get a more solid connection between the gripper/slide hammer and the ding you're pulling on. For large dents, get a cheap football, air wedge, basketball or beachball, and push them behind the dent when deflated, then use air pressure to push the metal out, preferable when the metal is heated up a little by the sun or a heat gun. The cheaper balls and air wedges will explode, so wear eye protection and keep a safe distance, but the metal will move. It's also a lot of fun! Good Luck!

    • @Au60schild
      @Au60schild 2 года назад

      Where the heck do you find 99% rubbing alcohol? This pharmacist of 30+ years has only found the 70% to be the strongest "rubbing alcohol" commercially available. Hell, even grain alcohol is only 70 - 90% alcohol.

  • @ovibug68
    @ovibug68 3 года назад +1

    In Romania Honda Element are very rare.I had two, one 4x4.It was the best and most reliable cars i ever used...really love it!

  • @peternewman958
    @peternewman958 4 года назад +5

    Minimum glue and always in the centre of the impact on sharp dents. Larger pad and more glue on say a knee dent etc.
    As he said you need to work the dent out slowly to get the best results.
    It takes some practice and especially PATIENCE to get the best result.
    Isopropyl Alcohol makes “Hot Snot” release from an object.

  • @Dynamics_ATang
    @Dynamics_ATang Месяц назад +1

    Really appreciate you sharing your skills here.

  • @musoseven8218
    @musoseven8218 4 года назад +6

    Nice video. That kit did a good job. The pros also use a mirror to help spot/remove dents and, on Eg door panels, a bar that slips inside the window aperture, to push the dent out from behind used in conjunction with a pencil sized nylon punch.

  • @albertoascari2542
    @albertoascari2542 6 месяцев назад +2

    I've used these type of of pullers before, it's worth a try..The professionals with the rods can work wonders though and make the dents invisible

  • @missmaomi28
    @missmaomi28 4 года назад +18

    A toaster lol.. pretty accurate description... I have a few dents like this that I can work out on my vehicle..
    I would buy the kit just from watching this video 👍

  • @shabbee
    @shabbee Год назад +1

    Great tip on the gripper, slowly working it thru👍👍

  • @larrytremarki9458
    @larrytremarki9458 4 года назад +5

    Nice job Josh, That kit is well worth $60 keep up the good work thanks for sharing.

  • @brentsmith5647
    @brentsmith5647 Год назад +2

    Brilliant video video thank you ❤️👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

  • @dustinosborn8969
    @dustinosborn8969 4 года назад +17

    Heating the panel before applying the tab can be helpful. And so can rubbing alcohol for glue removal.

    • @LavendrHoney
      @LavendrHoney 3 года назад +4

      Wouldn’t that keep the glue from hardening?

  • @serdarxxx1073
    @serdarxxx1073 Год назад

    Sir, very good Video 👍👍. God bless you 😘

  • @paulbradford8240
    @paulbradford8240 Год назад

    Thank you for the video. I have some dents to pull and you've given me the confidence to give it a go.

  • @stedder8436
    @stedder8436 4 года назад +11

    Simple and cheap. Can’t beat that, not to mention you have the tool to pull other dents out in the future!

  • @sikskillz2186
    @sikskillz2186 2 года назад +1

    great job. it’s looks simple and easy.

  • @theintruder77
    @theintruder77 2 года назад +8

    Really enjoyed the video. I do not have any dents in our vehicles but you make me want to buy this tool to be ready for the first one. You made it look so easy. I have a class C mechanic friend that uses similar items that cost an arm and a leg and that's why they charge so much for such a little job. Keep up the fun videos. We are up here in Canada and enjoy the videos from the south.

  • @jerrytalley802
    @jerrytalley802 8 месяцев назад

    I got a quote for a few small dents some years ago,mit was over $500. You got my attention since my dents are still there, along with one or two more, lol. I’ve only seen the cheap Online video ads of knockoffs

  • @bcgrittner
    @bcgrittner 4 года назад +13

    Half dollars? I remember silver dollars. OOPS! Hello, AARP? Social Security? Medicare? Eastwood makes good stuff. I'm impressed.

    • @genesloan3175
      @genesloan3175 4 года назад +2

      Wish I had a suitcase full of the Morgan Dollars I have.....

    • @bcgrittner
      @bcgrittner 4 года назад +3

      In 1963 we were westbound, stopped in Las Vegas, NV for a day, then headed South on US 66 ( now I-15). We stopped for gas. It totaled $4. Dad handed the man four silver dollars, each dated 1879. They were quite common back then. Not any more.

    • @anoint426hemi6
      @anoint426hemi6 4 года назад +2

      @@bcgrittner In 1966 i was in Bluefield Va.. and put money in a candy machine at the train station and it gave my change back in 1890s to about 1910 coins

    • @bcgrittner
      @bcgrittner 4 года назад +2

      Those were the days, weren’t they!

    • @anoint426hemi6
      @anoint426hemi6 4 года назад

      @@bcgrittner yes they were

  • @kamal_juv
    @kamal_juv Год назад

    Good job man

  • @garybonz
    @garybonz 4 года назад +4

    Thanks a bunch for showing us that, Josh, that is a good tool.

  • @HUFF-N-PUFF-2024
    @HUFF-N-PUFF-2024 3 года назад

    Eastwood dent remover. Feeling lucky punk!! Lol. TY for the awesome video going to buy one. Some jerk put a ding in my Honda also

  • @henkrenewmycar7732
    @henkrenewmycar7732 4 года назад +37

    Great video - hint - to minimize the risk of scratching the paint when removing the Tab or the glue residue, spray a little Wax & Grease remover (Prepsol) or medical alcohol from a Pharmacy - it dissolves the glue and won't damage the paint 🏆

    • @StoneyRidgeFarmer
      @StoneyRidgeFarmer  4 года назад +3

      Cool thanks for the tip

    • @gregverity9533
      @gregverity9533 4 года назад +2

      Agree about the alcohol. It wasn't mentioned once and he's either the luckiest guy around or he left a lot out of the video.

    • @Catchmeifyoucan209Stockton
      @Catchmeifyoucan209Stockton 4 года назад +4

      Man never see anyone who cares so much about dents on a farm vehicle! Usally we are betting who will have the few dents by the end of the year! But then never seen anyone use a honda for a farm vehicle. Either way good work bud! I remember my buddy's friends truck was so dirty I mean layers of dust inside and out there was more dirt inside the truck than the outside. I looked over and said man this truck has seen some years of ranch work he looked at me laughed and said years it's only 6 months old only had 1 oil change. I was dumbfounded I mean ok I understand going to get dirty but come on destroy a truck in 6 months a $70K Chevy Diesel insane. Lol just thought I would share that story! Good work on dents I am working on mine definatly takes some patience!!

  • @RakeshPathak-lu8yc
    @RakeshPathak-lu8yc 5 месяцев назад +1

    I always use thinner to clean after pull out Dent for cleaning it works perfect

  • @natevanlandingham1945
    @natevanlandingham1945 4 года назад +5

    Great video. I will have to keep this kit in mind for any potential future dents! Very affordable quality kit. I bet this guy sells a few of these because of this video!

  • @deyongutube
    @deyongutube 2 года назад +1

    Wow so this really works ! I am going to get the kit from Amazon soon. Thanks for the video!

  • @genesloan3175
    @genesloan3175 4 года назад +3

    Amazing, especially the rear. Didn't think it would get that sharp indented pointy looking one out.

  • @cjstransp9091
    @cjstransp9091 4 года назад +3

    I'm impressed, I honestly didn't think those things would work. Great job. 👍

  • @jtins10
    @jtins10 3 года назад +2

    Bought the kit and it worked thanks to you. Much appreciated

    • @Infinizen
      @Infinizen 3 года назад

      Where do you get this kit

    • @jtins10
      @jtins10 3 года назад

      @@Infinizen Amazon

    • @Infinizen
      @Infinizen 3 года назад

      @@jtins10 can you send the link please?

  • @deerrudy
    @deerrudy 4 года назад +9

    My wife must have owned that Honda ! Our conversation at home.. Where did that dent come from? Wife: I dont know that wasnt me. 😣 lol. Good vid

  • @philandhannahslittlefarm1464
    @philandhannahslittlefarm1464 4 года назад +3

    That's a neat gizmo! I have a few dints that I could use that thing on...

  • @HeartSoulLeake
    @HeartSoulLeake 2 года назад +1

    Like it. Our problem is access to AC power for the glue heater gun. Is there a alternative portable hear gun?

    • @StoneyRidgeFarmer
      @StoneyRidgeFarmer  2 года назад +1

      you can't drive your car to a place that has an electrical outlet? I'm not understanding my friend....you can't run an extension cord out to your car?

    • @HeartSoulLeake
      @HeartSoulLeake 2 года назад

      @@StoneyRidgeFarmer thank you. we live in Bronx, Co-op City. No private access to electrical outlets

    • @HeartSoulLeake
      @HeartSoulLeake 2 года назад

      @@StoneyRidgeFarmer We might just invest in a portable generator

  • @mikelfears2789
    @mikelfears2789 4 года назад +5

    Come to Jonesboro Arkansas.. I have some dents you can work on to get some more practice!

  • @priscomatro2490
    @priscomatro2490 Год назад

    you have such a talent sir thank you for sharing.

  • @ZombiePotatoSalad
    @ZombiePotatoSalad 4 года назад +19

    "You've never seen a dent pulling tool like this!"
    Me: *flashbacks to the old Pops-A-Dent commercials*

  • @test-kt4tk
    @test-kt4tk Год назад

    Thanks for sharing. Great video. What glue do you use? Would mind sharing. Cheers

  • @wrzl1675
    @wrzl1675 4 года назад +3

    I was skeptical at best but, hey, that did pretty good job!

    • @gregverity9533
      @gregverity9533 4 года назад +1

      You have every reason to be skeptical it isn't that easy a lot was edited out.

  • @LateNightCable
    @LateNightCable 2 года назад +1

    This looks like a perfect kit to try on my little ‘99 Miata, which has 15-20 very light dents around the body, barely noticeable unless you look for them. Then it’s onto restoring the paint.

  • @roberto1238
    @roberto1238 4 года назад +21

    Thank you for posting this and your presentation skills. Appreciate both your DIY abilities and your positive attitude. BTW, I’ve had PDR done professionally and the results were in all but one case were disappointing. One company was very professional but the others were quick buck artists more accustomed to “chasing hail” with little accountability for their work.

  • @1might1
    @1might1 2 года назад +2

    Quickly See @5:45min Dent Being Repaired.

    • @StoneyRidgeFarmer
      @StoneyRidgeFarmer  2 года назад +1

      or watch the video and learn how to do it so you don't screw it up lol

    • @1might1
      @1might1 2 года назад

      @@StoneyRidgeFarmer True😎..lol. Great Video. I did watch the whole video.

  • @davidvelen9835
    @davidvelen9835 4 года назад +6

    I have always wondered how that type of dent repair system works, thanks for sharing !

  • @alakablam7901
    @alakablam7901 2 года назад +1

    I bought one of these to fix some hail damage on my ‘86 e28. Worked great the first couple of shallow dents but then pulling a deep dent on the bonnet it removed an inch in diameter piece of paint right down to the bare metal. Use this at your own risk.

    • @StoneyRidgeFarmer
      @StoneyRidgeFarmer  2 года назад +3

      if you're paint came off...then paintless dent repair would never do ya any good my friend ...the dent was too big and had already ruined the paint by separating from the surface....sorry that happened to ya buddy

  • @JonMiller84
    @JonMiller84 4 года назад +5

    Any dent technician will tell you that doing it youself can cause a lot of issues. If you accidentally pull the paint or overstretch the metal, you could end up spending a lot more. For some farm truck beater its one thing, but on a nicer vehicle its much less of a risk to trust a technician who knows what there doing and save yourself from a potential nightmare. 90% of customers i get called out to who attempted the repair on there own, made the damage irreparable using the pdr method.

    • @StoneyRidgeFarmer
      @StoneyRidgeFarmer  4 года назад +2

      cool good info...so if you're gonna do it yourself be prepared to screw it up...I was prepared lol

    • @JonMiller84
      @JonMiller84 3 года назад

      @Byron Manza because im a 13 year paintless dent removal professional. There are trained and certified dent techs all over the world of all shapes sizes and color. If you care about your car, you take the time, do the research and find a good one. Good dent techs would never work for only 15 a hour

    • @JonMiller84
      @JonMiller84 3 года назад

      @@StoneyRidgeFarmer yup pretty much and just be ready for it to cost more to fix your mistakes if you do make them, or for it to not be repairable anymore with our methods and have to take it to a shop

  • @HamiltonvilleFarm
    @HamiltonvilleFarm 4 года назад

    Nice work Josh

  • @detnibul9361
    @detnibul9361 4 года назад +13

    Use isopropyl alcohol to remove hot glue. You won't have to chisel the plugs off of your painted surface. The plugs will easily pull off and the isopropyl alcohol is safe on your paint

    • @Onefourtyfour
      @Onefourtyfour 3 года назад +1

      I've painted for 10+ years and I can tell you for certain, denatured alcohol will completely destroy your car's clear coat which is obviously no bueno. Nice trolling 👍🙂

    • @Onefourtyfour
      @Onefourtyfour 3 года назад +1

      The only suitable solvent you should put on your car is water and soap. Anything else is going to degrade it to some degree.

    • @sunshineboy17
      @sunshineboy17 Год назад +1

      @@Onefourtyfour Denatured and Isopropyl are two different animals. Denatured contains ETHYL and some other chemicals, whereas Isopropyl contains only isopropyl. Both are classified as evaporatives, but the isopropyl will deteriorate any clear finish on a car way less than denatured alcohol. That is why isopropyl alcohol is the preferred method of getting the glue to release.

    • @Onefourtyfour
      @Onefourtyfour Год назад

      @@sunshineboy17 so you agree me. Don't put alcohol on your car. All forms will degrade finish

    • @sunshineboy17
      @sunshineboy17 Год назад

      @@Onefourtyfour If one disregards the details in my original comment, then the point will be missed. Evaporatives, specifically isopropyl, is formulated to not damage skin, or in this case the clear automotive coating. So, in theory, yes it can be used in this case because one needs something to remove the glue stick material. Scraping is worse than isopropyl. Does isopropyl damage the clear coat? Technically, yes, because it will dry the clear coat out, reduce the sheen minimally, but still reduce it and also open the crosslinking system in the catalyzed clear coat, thereby compromising the bonding system of the several monomers, in this case polymers. So, yes, all forms of alcohol will degrade the finish, but then the question remains of how to remove the glue stick material. Soap and water alone will not solve the glue stick material due to its paraben nature. Isopropyl is recommended specifically because it is the least invasive to the clear coat.

  • @howabouthetruth2157
    @howabouthetruth2157 Год назад +1

    That was a great demonstration using that kit. Very informative, thank you.

  • @Turn-the-light-off
    @Turn-the-light-off 4 года назад +3

    NIce! Do I remember a half-dollar, I do and I still have some laying around somewhere in a desk. Now I guess that wouldn't remove the dent I left upon someone's front hood. I was hit by a car back a few months ago, launched 20 feet, (I am fine) the driver of the car, I have never seen again but I left a body imprint. Wonder if it would work, probably not lol

    • @StoneyRidgeFarmer
      @StoneyRidgeFarmer  4 года назад +4

      lol welcome to the "hit by a car club" lol. I used to race bicycles...been hit at least 4 times...lucky no permanent injuries

    • @Turn-the-light-off
      @Turn-the-light-off 4 года назад +2

      @@StoneyRidgeFarmer Thanks, not my first time but you get to meet a lot of pretty nurses ; )

    • @jalopyjoe4483
      @jalopyjoe4483 4 года назад +1

      @@StoneyRidgeFarmer there's a club? Nobody told me. Got hit on my bikes 4 or 5 times when living in Boston. Never got nothing. Would been nice to get invited to a club and get a bumper sticker or something...

  • @brucebissell7626
    @brucebissell7626 Год назад

    AWESOME!

  • @tomthumb1941
    @tomthumb1941 4 года назад +4

    After a while Josh, do a report what you think about the Element, I'm curious. thanks. I like when you talk about different subjects and review equipment.

  • @rbo350
    @rbo350 4 года назад

    wow I have an element with the same dent in the back I think its from a shopping cart, I have seen a similar dent puller but it used nails that were welded to the body and pulled out filled and painted, this looks easy

    • @gregverity9533
      @gregverity9533 4 года назад

      That's the difference between PDR (paintless dent removal) and panel beating.

  • @billrandell4641
    @billrandell4641 4 года назад +4

    Nice Job Josh and it's really great how well your work, building this channel, has progressed!!🇺🇸

  • @daha3074
    @daha3074 Год назад

    It works like magic!

  • @sloanesnydet
    @sloanesnydet 4 года назад +13

    try heating up the pannel abit with heat gun

  • @CRIXUS109
    @CRIXUS109 2 года назад +2

    Men thank you, I hope works in my dent , this last sunday some one hit my door , I'm so angry

  • @wildefox1478
    @wildefox1478 4 года назад +8

    Awesome video Josh, love your videos, keep'em comin'!

  • @anoint426hemi6
    @anoint426hemi6 4 года назад +1

    I got a large dent pulling kit i bought a few years ago but afraid to use it. Maybe you've given me the guts to try it out on my Ram.. thanks!

    • @anoint426hemi6
      @anoint426hemi6 4 года назад +1

      Tried my dent tools a few days ago on my BMW X3. I had one crease by the b pillar and just below it on the rear door a small dent. I used a long pull tab on the crease. It took several attempts to get it out and it looks really good. The door on the other hand not so lucky. No matter how many times i tried the dent wouldn't pull completely out. The sheetmetal is so thin the tool is warping it! I would have never guessed BMW used really thin metal. Later on I'll pull the rear door panel and see if it can be stiffened or maybe i won't. It looks much better.

  • @eazyrider6122
    @eazyrider6122 4 года назад +9

    You have to tap the dents with the tap down destress tools to relax the tension created by the originL dents.
    A line marking light exposes the stress points.

  • @joelstuart26
    @joelstuart26 2 года назад +1

    Goodness

  • @davekana8388
    @davekana8388 4 года назад +5

    Now I know what I want for my upcoming Birthday 🎂 thanks, Dave!

  • @rollthers3157
    @rollthers3157 2 года назад

    That's cool. Nice camera work.

  • @MrBigbuckzilla
    @MrBigbuckzilla 4 года назад +5

    I would love to see you try this on stainless steel appliances. As they become more popular dings are inevitable and there isn’t really any good videos on getting these types of ding’s out.