The music from this video helped to soothe my rage from the half-dozen previous videos that failed to show how to connect the RGB cable to the motherboard. I tip my hat to you sir
I was looking for Gammaxx 400 V2 installation for Ryzen but I couldn't find a proper video guide. Thanks mate for making this video. I'll watch it again once my cooler is delivered.
I've been looking for quite a few hours now on what is the difference between the GT line ups, then boom I saw it on the first few seconds of your video, thank you for this
this helped man im getting the cooler but white version was using the stock cooler for a while its too hot so I decided to buy an aftermarket this helped with installing it
So many people asking if it will fit in their case. No offense, but hardware reviewers don't have every case lying around to check. Googling the make/model for compatability is what they would have to do as well. Wouldn't take long for one, but it sure would for this many.
Does anyone know if the DEEP COOL GAMMAXX GT A-RGB Cooler will work on a MSI b450 Motherboard ? I'm taalking about the RGB function. appreciate your help
I don't know. Can i speak with you? So, i don't how many pins are. But is from gigabyte. I downloaded gygabyte 2.0 software for rgb. But is detecting only the rams. I tried asus and msi one but it the same, what to do
@@OdinHardware I figured it out, one fan cable goes to the CPU fan header. The other cable from the fan and heatskin are for RGB and need to be connected together and then connected to the RGB 12v connector. The RGB on this thing sucks tho and it can't handle certain effects.
This Air cooler is quite nice and keeps temperatures under control quite easily for my 5700x, BUT I find it extremely annoying that Deep Cool doesnt send two more clamps to use another 120mm fan, absolutely unecessary
I got a prebuilt that came with this cooler and I was wondering where the rgb header is so I can change the colors of it. What I mean is, is it above the cooler, to the left/right, below it, or on the back of the pc.
it's been 3 months since I have bought this cooler, suddenly nowadays during stress tests, I get average temperature around 82C... earlier it was 75..what should i do?
I have the same one but can't get rgb fusion to recognize and customize the rgb. Gigabyte b365 HD3 if it matters. Doesn't recognize gpu either, but was wondering if you had any issues with the fan itself and I'd you had fixes?
I just realized that the cpu cooler is kinda crooked, got mine last week and i noticed from the front mesh that the cooler isnt straight, great temps tho i think its ok
The music from this video helped to soothe my rage from the half-dozen previous videos that failed to show how to connect the RGB cable to the motherboard. I tip my hat to you sir
Feel very happy to know this.
😍
Dude, thanks for making a nice, simple, relaxing video that doesn't have techno music blaring the whole time ♥
Thanks a lot for mentioning it
Yeah
I was looking for Gammaxx 400 V2 installation for Ryzen but I couldn't find a proper video guide. Thanks mate for making this video. I'll watch it again once my cooler is delivered.
Feel happy to know this
cooler master same property rgb is 50, this one is only 30. bought it on sale for 22.99 usd
@@OdinHardware thanks for telling me how to install. nice video
I've been looking for quite a few hours now on what is the difference between the GT line ups, then boom I saw it on the first few seconds of your video, thank you for this
👍
wtf i only can see pink screen in whole video
This channel will be big someday, keep up the content mate, i'll be cheering for you
Thanks a lot. I'm immensely motivated after reading your comment.
Thanks. ❤
Thank you, this should be the official installation video
Thanks ❤
It looks very easy to install, thanks for the tutorial now I will wait when I have my pc to apply this tutorial
👍👍
Nice one, Odin. Very helpful.
Considering this Cooler in my next upgrade (may buy tomorrow), so good on you for this 👍🏼
Thanks for the comment. Yes this is good for the money
Just came home after buying it, thanks for the installation guide
😀
Thank you, I will wait to have my pc and when I have it I will return to this video to install the heatsink
Thanks ❤ you will come back soon
maybe that much thermal paste was too less
Best guide. I will be using it to install my gammax 400 v2.
👍👍
Thanks for the video! I was able to find out that I was missing the RGB extension/cable that came with the package to connect to the motherboard
where do you connect the extra 4 pin cable from the rgb ? the extra 4 pin cable that you left on 6:51
It goes to the rgb header(4 pin) in the motherboard.
Bro this video helped me so much man thanks a loadzz ❤️
Welcome 🙏
whoa this is actually pretty good.
the best video! Thank you!!!
Welcome
Thank's my brother!
👍👍
this helped man im getting the cooler but white version was using the stock cooler for a while its too hot so I decided to buy an aftermarket this helped with installing it
Yes, it's much better than stock cooler
@@OdinHardware yeh i already installed it and my temp is so good 60-70 underload used to be 85 higher
This is exactly what i need
Great video! I have this same cooling fan and was wondering how to take it off to change out my cpu. Doesn't look difficult at all. Thank you!
It's very easy. You can do it
Yup I did it. I now have an i9. Thank you for the confidence Odin!
Excellent cooler, not expensive. I use it for I5 12400F (65W, boost 125W, Cooler 180W) CPU and rarly go above 55C even after stres test or gaming.
Absolutely a value for money cooler. Much better than hyper 212 in terms of money/performance ratio
Thanks for the info!
Buen video, gracias. saludos from Chile.
💞
So many people asking if it will fit in their case. No offense, but hardware reviewers don't have every case lying around to check. Googling the make/model for compatability is what they would have to do as well. Wouldn't take long for one, but it sure would for this many.
I see not even 10
no thermo paste?
Yes, I applied . It comes along with the cooler in small separate bag
I can't make those screws at 5:39 to fit, anyone know why is that?? :(((( they just don't fit
How tight those screws that go on the motherboards should be? Do you use a bit of force?
Little force is enough, i.e. till it stops rotating
3300x in 28° ambient room temp max load
stock cooler - 88° to 90° celcius
gammaxx 400 - 72° to 73° celcius
Cool
@@OdinHardware is it ok ?
You put the clips for the fan on the wrong hole, it's the one nearest the radiator not the outside ones.
nah, both is correct, just see the deepcool website, the clips its on the front, not the back
True, But looks better on the inside much cleaner, good video tho
Does anyone know if the DEEP COOL GAMMAXX GT A-RGB Cooler will work on a MSI b450 Motherboard ? I'm taalking about the RGB function. appreciate your help
Work only 3 pin argb header motherboard
Exact model please
So i got it to work with a 12v4pin... 😒 I dont know, why people say, i need a 3 pin 5v
Could you use the stock metalic Back Plate instead the plastic´s gammax back plate ?
No, it won't work
Was the cpu plate at the bottom a slightly bent/slant rather than being totally straight i.e. 180 or 90 degress?
Straight, but it will bend slightly after installation
A very good video. Thank you very much.
🙏👍🏽
what software do you use to change the RGB? Having trouble finding one that will detect the cooler and allow me to chnage the color
I used motherboard rgb tool
Where did you plug the rgb control connector? :(( i’m confused because there’s multiple pins on my motherboard
Connect to 4 pin rgb header on the motherboard
Dude I still don’t understand where do I have to put the cables
If you don't have DeepCool AG400 LED then Deepcool Gammaxx GTE V2
?
Your video is si good i have a question can i turn off the rgb? Or without connect the rgb cable the prblem is solved?
Yes you can turn it off via motherboard software. Not sure about unplugging the rgb cable
is that RGB color controlable?
Yes, via motherboard software
excuse me bro, i can remove the fan and add another one in ARGB?
Yes it's possible but you will only one fam clip with this cooler. How will you add another one ?
Is the temperature difference big for Ryzen 5 3400G with Wraith Spire?
Not huge
@@OdinHardware thank you. Maybe I will hold on to this cooler for a while.
Thanks for video. Can i use razer chroma app to control rgb?
Not sure, haven't tried yet
Can I control the Rgb of this cooler if I have a Z390 Gamin x motherboard? And if yes, please say how
You can control it via motherboard software. Make sure the motherboard has four pin RGB header
I don't know. Can i speak with you? So, i don't how many pins are. But is from gigabyte. I downloaded gygabyte 2.0 software for rgb. But is detecting only the rams. I tried asus and msi one but it the same, what to do
if you just connect the 4 pin for powering the cooler, will it light up with the default color (example red)?
I don't think so
Nicely done 🙏🙏
Thanks for the comment
I don't understandsertand the cable system. One is connected to the heatsink and there are two on the fan. Where do these go?
One connector is for the power(connect it to motherboard fan header)
And other is for Rgb light control(rgb header,4 pin on the motherboard)
@@OdinHardware I figured it out, one fan cable goes to the CPU fan header. The other cable from the fan and heatskin are for RGB and need to be connected together and then connected to the RGB 12v connector. The RGB on this thing sucks tho and it can't handle certain effects.
This Air cooler is quite nice and keeps temperatures under control quite easily for my 5700x, BUT I find it extremely annoying that Deep Cool doesnt send two more clamps to use another 120mm fan, absolutely unecessary
Yes, two more clips will be more complete package
pretty nice video. Just a question, can i put thermal paste right on the base of the heatsink, on the copper contacts?
Yes you can
Nice video. By the way, will this fit into a Trendsonic Styx case? thanks in advance.
Thanks
It should fit
@@OdinHardware thanks for your reply. I'll get one and try it.
Excelente vídeo!
Thanks 👍
If I have MSI Motherboard, and I use ASUS Aura Sync for RGB Control of my peripherals, will it work if I also use Asus Aura for the CPU cooler?
Not sure 😕
@@OdinHardware Thanks for the reply sir! ;)
Where i can get a second fan, for a pull&push build?
Any 120mm brand should fit but gte v2 doesn't provide any extra clamps for second fan
When I installed the bracket it still wobbled but it doesn’t when I screws the cpu heat sink down is that normal for that bracket
Yes normal, after tightening the screws it will become stiff
With wich logiciel can i change the RGB ?
Great video btw
light is fixed. you can swap with rgb fan
I got a prebuilt that came with this cooler and I was wondering where the rgb header is so I can change the colors of it. What I mean is, is it above the cooler, to the left/right, below it, or on the back of the pc.
It's attached to the fan
Bro is this 4 pin rgb header will rgb work with my msi b450m mortar max. My mortar max has Jrgb 4 pin please answer brooo tyyy
It will work
@@OdinHardware thanks bro
would you recommend this over wraith stealth(stock 3600 cooler)?
Yes, 10 deg less with this cooler . In this test, I too used 3600. Check today, I will be uploading video comparing stealth versus this model.
@@OdinHardware is assassin 3 worth it? or go gammaxx?
@@mts982 a3 is better, but it costs atleast twice the times than this model
stock stealth vs gte v2 - ruclips.net/video/0-bPcovSlDI/видео.html
For me I got 20c less than stock, 68c max temps
Have the cooler but not the bracket what should i do any aftermarket bracket that will work for this cooler?
It's very difficult to get it especially India. Contact deepcool support center
it's been 3 months since I have bought this cooler, suddenly nowadays during stress tests, I get average temperature around 82C... earlier it was 75..what should i do?
Is the fan speed at maximum level?
Winter/Summer scenario?
Check the thermal paste... You probably didn't put enough?
Is that upper fan in your cabinet intake or exhaust??? Please reply
Exhaust
Nice video.
Could this fit on a ITX cooler master NR200 case?
Chances are there, but it will be too close. Can't confirm. Nr200 supports upto 155 and this cooler is 157
I have the same one but can't get rgb fusion to recognize and customize the rgb. Gigabyte b365 HD3 if it matters. Doesn't recognize gpu either, but was wondering if you had any issues with the fan itself and I'd you had fixes?
Could the rgb cable connector plugged into rgb controller? Since my motherboard does not support rgb header/sync.
Yes
What resolution were you running Battlefield at? Fps seemed low for a 2060 super
Should be 1440p
ray tracing maybe?
Not sure if you have a decibel reader or not, but how loud does the fan get?
It's quiet
Can the given fan be replaced by another fan as long as it is a 120mm fan? Regardless of the speed and etc of the new fan?
Yes possible. Make sure the thickness is same
But this model doesn't supply that extra clip for adding second fan
Hey. You don’t know why it don’t working with colors ?
will this cpu cooler give me clearnance for all four ram slots to be filled with high profile ram sticks?
Yes it will cause, but you can adjust fan height
Hello, is it enough thermal paste at 4:35?
Enough
Also you apply evenly on thw cpu surface ,(as suggested by one user) and it will reduce one or two degrees
@@OdinHardware Thank you! I've ordered the same cooler. I watched your video for preparation. It's so helpful.
nah i swear i didn't get any of this stuff that you put next to the AM4 thingy n that
Hi, I know I'm a little late, but can the RGB still works even though my MOBO doesn't have RGB Header?
You can't change color
@@OdinHardware Thank you for the reply. And indeed I can't change the color.
If I add another fan on it will it become better than 400 Pro or similar?
As I know there is like 1°-2° difference
Similar results
Think this would be good for ryzen 5 5600x?
Fine
my motherboard does not have inputs for rgb 12v, 5v, or other. what do I do?
Can't do anything. Use should use RGB controller separately
Trae la bincha extra para poner otro ventilador es push and pull?
*will it fit MSI MAG X570 TOMAHAWK WIFI motherboard* *Will it provide enough cooling for overclocking RYZEN 5 5600x* ?
It's fine for 5600x at stock speeds/settings. If you manually tweak the voltage I.e reduce vcore volt for oc, then it okay for 5600x overclock
@@OdinHardware ok thanks for confirming.👍
I just realized that the cpu cooler is kinda crooked, got mine last week and i noticed from the front mesh that the cooler isnt straight, great temps tho i think its ok
Should blame quality control
Hi man is this enough for ryzen 7 5700x? Now i have noua akari pro and in game bf 2042 my temps are around 83° 85°
Yes manageable. Definitely better than the existing setup
@@OdinHardware ok thanks
@@OdinHardware today is arrived and now the temp are 70 72° it's a beast
its ready for lga 1200?? Intel 10400f exactly
Yes
Болты затягивать до упора,пока дальше не пойдет?
Yes, but stop once you hear click sound
For the rgb header, is it 4pin or 3pin? By the way very nice and informative video sir.
It's 4 pin. Thanks for the compliment
Would this cpu cooler be enough for an overclocked 10700k?
Definitely not enough
How do you change the RGB lights?
Through Motherboard software
Can we change the colour to cyan only??cyan is my fav but i see there RGB is changing
Yes you can choose the static option(cyan)
Hello bro I have the same one but my msi motherboard software doesn't recognise it so I am unable to change lighting. Please help if you know any fix.
Use dragon center software
@@OdinHardware My dragon center says blocked by firewall what do I do? Im just trying to turn off the led fan
Witch program do you use to overclock the Ryzen 5 3600?
Ryzen Master
I need help i got one of these cpu coolers and for me it only lights up white what do I do?
You should connect the RGB pin motherboard RGB header and then control via motherboard RGB software
@@OdinHardware Thanks I will try this :)
Does thermal paste come with it ??
Yes
Hey. If I connect this to an rgb header of my motherboard and not an rgb controller, how do I control the lights? Some software?
Via motherboard software
Hey would you get this or the GAMMAXX 400 V2?
Both are almost same in terms of performance
So choose based on aesthetics and pricing
what motherboard did you use?
Can't remember now
Check description(should be there) I hope
What is the difference between this and the Gammaxx 400 v2?
Should be aesthetics
where do you plug the rgb to motherboard?
Yes, to motherboard RGB pin header
Does Msi h410m A pro support deepcool gammaxx gte v2 ? Please repply
Yes, it will support.95% of the models will support
@@OdinHardware i mean does it supprt the RGB on cpu cooler?
Is that enough thermal paste ?
Yes, you can also apply little bit more
Alguém aí sabe me falar se eu instalar ele na placa mãe sabertooth 990fx rev2.0, eu perco 1 slot de memória ???
Should we have to put thermal paste again?
If Thermal paste is not preapllied on the cooler, then you must apply manually
@@OdinHardware can you please show how to remove the fans and the cpu pls
Would this work good for i5 9400
Very good for 9400
@@OdinHardware well hello how about brand new lga 1200 sockets i5 10400f? Will fit or not
@@workitwillis2499 Yeah.. that's my cpu as well
Brother how did you set it to changing colors?
Used motherboard software
Hi how do iturn off lights😊😊
Not possible. But you can change fans with rgb