Thanks bro! I'm actually using Supafly's preset tune in BF (the 3"/4" tune), didn't change anything and with the Dynamic Notch Filter off (as what Supafly recommends). Hope this helps!
Yup, the stock cable is waaay too long. I think around 80-90mm would be good with a little a bit of slack. Unfortunately, it's either 60mm or 100mm where as the stock is 150mm. I would perhaps go for the 100mm with a bit of slack just in case.
Hi man. Great Fly. I have a very similar setup, would you share your filters and pid with a friend? 😅 I am having some vibrations on my footage
Thanks bro!
I'm actually using Supafly's preset tune in BF (the 3"/4" tune), didn't change anything and with the Dynamic Notch Filter off (as what Supafly recommends). Hope this helps!
Rad flying man. ❤ looks like a real nice drone. Take care bud
Thanks, man! Keep on flying! 😘😘😘
Hi. Have You measured the required lenght for the coaxial cable of the o3? The default cable is too long but I'm nott sure if 60mm would be enough
Yup, the stock cable is waaay too long. I think around 80-90mm would be good with a little a bit of slack. Unfortunately, it's either 60mm or 100mm where as the stock is 150mm. I would perhaps go for the 100mm with a bit of slack just in case.
how long flight time ? 4 - 5 minutes ?
3-4 mins if I send it, 5-6 mins if slow cinematic.
3.6 props is okay with volador 3.5?
Yes! Officially, FlyfishRC says 3.5" (I asked) but I'm using Gemfan 3630 with no issues.
@@velocistafpv yeah you need them. 2105 is muchhhh to large for 3.5-3.6in props and make more sense for 4.5in so they are pretty nessecary
@@velocistafpvnice!what kv motors?👌🏼🙌🏼
@@ludofevrier5593 GEPRC SpeedX 2105.5 2650kv running 6S bro .
bro, can you share the pid
hey bro. I'm just using the Supafly preset in Betaflight. Hope that helps!