Osram Rallye 100/90 I have not checked, but what I am using Rallye Pro 100/90 where they say if I do Hi-Lo or flash for passing the filament will not fuse off. Earlier I had non-pro models but that used to fuse off soon. These are still working like a charm.
Sir which one should i use philips rally or racing or extreme for my ciaz delta 2021 model and can i use it without relay. Note my car have inbuilt projectors
I think the Ciaz Delta has H7 bulb type and needs 4 of these for High & Low beams separately. OEM recommends Philips XtremeVision 55W which is more than enough for daily usage and occasional tours. This does not require a relay & harness. Just replace the previous bulbs with these. The Philips Rally Pro starts from 100/90 watt and needs a relay, ceramic bulb holders and additional wiring harness with relay due to higher capacity of current directly connected to the Battery and is triggered through a relay. Since you also have a projector, heat enclosed is more than the radiatedheat, hence it will be better to use Philips XtremeVision 55W.
Philips Rally Pro if you use 100/90 watt, then its preferable to use a relay & a harness with thicker guage wire. The bulb holder needs to be replaced with a ceramic ones. In the long run it will help and wont melt / deform due to exessive heat generated by the Rally Pro bulbs. Instead try Philips XtremeVision or a RacingVision. The RacingVison has 1/2 life span that is 200 hours than XtremeVision of 400 hours. Please also check that Ciaz will have H7 bulb type and not H4.
@automotriztechnica ok I will install the racing or extreme I have last question will there be a huge difference between the visibility of racing and extreme lights or it will be same
@ From OEM to XtremeVision, there is a significant of difference and slight yellow than RacingVision good in rainy & fogs penetration. For RacingVision it’s slightly towards more white. Yes, it vision is better, just a game of thinning the filament and playing with Quartz Glass to make it’s Colour Temperature shift its axis towards white. It’s a game of Kelvin where they fine tune the Colour Temperature so that human eye can see more whiter. It’s the game of Wavelength altogether without changing the wattage. The filament thickness is like this OEM>XtremeVision>RacingVision and so the life span is OEM>XtremeVision>RacingVision 800>400>200 hours respectively. Hope this helped.
Thank you so much for the detailed video. I am in Bangalore if you are also in Bangalore could you suggest me the Mechanic who did the Relay wiring done for you ? Please.
I did it at Malleshwaram GT Enterprises, Electrician name is Rafallle. It’s at 5th Main, 7th Cross, You can see its opposite road to Euro Kids. I know them since 20 years, did a great job on my car. Which is your vehicle?
@@arupchakraborty8208 They used wires with good gauge and a relay with ceramic holders they made themselves with soldering. It’s better than any copy wiring harness. Bulbs I asked them to use Philips Rally Pro 100/90 which they had with themselves. Call Rafel for job work and his availability is you are interested to get it done from him: +91 94492 61882, +91 96065 31882 Please refer my name, even you can show this video, he will help you with your requirements.
Hi Yogesh, thank you so much, with your reference I went ahead and got my head light bulb upgraded to phillips rally pro. And Rafel is a very good guy for this job.
I installed with relay philips rally pro 100/90 h4 bulb in my wrv and the bulb is 🔥👌 awesome it's very powerful im very happy to purchase this bulb im satisfied
Hello bro I am also thinking to upgrade to 90/100 in Honda amaze vx 2019 petrol. But I am confused that_ 1. Will the head light of my car will get black over a period of time?.. 2. Have you ever faced that the bulb is getting fused after upgrading to 90/100 h4 . 3 . are you getting heating issue or problem?..
@@odsahir6816 avoid excessive usage of high beam and by pass signal and use genuine philips bulbs and philips relay and wiring kit and turn of your lights at traffic signals.Everything will be fine.I am using 130/100w rally bulbs for my swift since a year and my reflectors are as good as new.High beam and pass signal are the main cause of bulb failure and reflector turning black along with cheap relay and wiring kit and counterfeit bulbs.
I have a query...kindly advise me . I installed Philips h4 rally bulbs 130/100 along with Philips relay kit in my alto car. Initially was very happy with the upgrade, while driving on the highway but now am not satisfied. So...what should i do now to upgrade the bulb. 1. Philips extreme vision ? 2. Philips racing vision ?
Since you already have a harness that will help, you could have used Philips Rally Pro 100/90 as the 130/100 might generate more heat and done can lose its reflective coating and front cover might fade. What you have is a better install, Philips RacingVision/Xtreme vision are not that powerful in front of your 100/90 mods. I have 130/100 installed in our native place for Alto LXi. It is still working fine. Check your dome is transparent and please use 100/90 rally pro if you see more heat is generated.
I have installed it today, but i have not installed relay with it,as mechanic told me that 90/100 bulbs don't require relay, relay is required for only 100/130 h4 bulbs... my question is that should i go with or without relay?..
@@odsahir6816 It depends on where did you install this. Not only the relay but relay along with harness is an added advantage for carrying more current for the 100/90W so the current is almost 40% extra from 65/55W, the wires and the bulb holder present are for the OE wattage 65/55W. In the long run there are chances of oxidation of wires and get deterioration for both wires and holder as well. The harness has thicker wires and a relay with Ceramic Holder, hence for 100/90W it is recommended to protect the OE wires in the long run.
@@automotriztechnica I have gone to an out let of Maruti... They have told me stock holder is capable of handling 90/100 bulbs .... In fact he is using these 90/100 bulbs in his car ....
@@odsahir6816 If he is aware of the scenario on stock holder you can keep a check and monitor it every month if that is not deformed. By the way which Maruti Suzuki model you have fitted 100/90?
@@odsahir6816 OK, The Rally Pro bulbs are very good for Swift & Desire models. Please keep a close watch on the OEM holders as these bulbs gets more heated; rest all should be OK 👍 if the Maruti technician has confirmed
i also installed philips 90-100 h4 rally pro in my swift recently. its amazing with capable of providing all weather visiblity
That’s the best thing ❤️
Nice vlog and good choice of bulbs for Swift. 👏
Yes indeed, these are the best affordable too.
Which is best philips rally h4 or philips rally pro h4
@@Sahil_Thakur086 Philips Rally Pro is always better because when you dim-dip lights it won’t fuse like normal Rally
Nice video Yogesh. I could use your swift videos for my dzire which is my primary car now
Thanks Rohit! These lights will for your Dzire too 💐
How are these bulbs working and are they better than the osram rallye 100/90?
Osram Rallye 100/90 I have not checked, but what I am using Rallye Pro 100/90 where they say if I do Hi-Lo or flash for passing the filament will not fuse off. Earlier I had non-pro models but that used to fuse off soon. These are still working like a charm.
Sir which one should i use philips rally or racing or extreme for my ciaz delta 2021 model and can i use it without relay. Note my car have inbuilt projectors
I think the Ciaz Delta has H7 bulb type and needs 4 of these for High & Low beams separately. OEM recommends Philips XtremeVision 55W which is more than enough for daily usage and occasional tours. This does not require a relay & harness. Just replace the previous bulbs with these. The Philips Rally Pro starts from 100/90 watt and needs a relay, ceramic bulb holders and additional wiring harness with relay due to higher capacity of current directly connected to the Battery and is triggered through a relay. Since you also have a projector, heat enclosed is more than the radiatedheat, hence it will be better to use Philips XtremeVision 55W.
@automotriztechnica ok sir I will fit the extreme one will I get this in maruti genuine and what will be cost does it will cost more than 3 thousand
@ You get XtremeVision as Maruti Genuine Accessories where one might cost 633 INR for H7 approximately
@@automotriztechnica ok sir thanks for the information
Can i use raly pro for my ciaz delta model in the projectors without relay
Philips Rally Pro if you use 100/90 watt, then its preferable to use a relay & a harness with thicker guage wire. The bulb holder needs to be replaced with a ceramic ones. In the long run it will help and wont melt / deform due to exessive heat generated by the Rally Pro bulbs. Instead try Philips XtremeVision or a RacingVision. The RacingVison has 1/2 life span that is 200 hours than XtremeVision of 400 hours. Please also check that Ciaz will have H7 bulb type and not H4.
@automotriztechnica ok I will install the racing or extreme I have last question will there be a huge difference between the visibility of racing and extreme lights or it will be same
@ From OEM to XtremeVision, there is a significant of difference and slight yellow than RacingVision good in rainy & fogs penetration. For RacingVision it’s slightly towards more white. Yes, it vision is better, just a game of thinning the filament and playing with Quartz Glass to make it’s Colour Temperature shift its axis towards white. It’s a game of Kelvin where they fine tune the Colour Temperature so that human eye can see more whiter. It’s the game of Wavelength altogether without changing the wattage.
The filament thickness is like this OEM>XtremeVision>RacingVision and so the life span is OEM>XtremeVision>RacingVision
800>400>200 hours respectively. Hope this helped.
Thank you so much for the detailed video. I am in Bangalore if you are also in Bangalore could you suggest me the Mechanic who did the Relay wiring done for you ? Please.
I did it at Malleshwaram GT Enterprises, Electrician name is Rafallle. It’s at 5th Main, 7th Cross, You can see its opposite road to Euro Kids. I know them since 20 years, did a great job on my car.
Which is your vehicle?
@@automotriztechnica Thank you so much.
Hi Sir, also from where did you buy the bulb and relay wiring kit? as buying online i heard heavy chances of duplicate product they sell.
@@arupchakraborty8208 They used wires with good gauge and a relay with ceramic holders they made themselves with soldering. It’s better than any copy wiring harness.
Bulbs I asked them to use Philips Rally Pro 100/90 which they had with themselves.
Call Rafel for job work and his availability is you are interested to get it done from him: +91 94492 61882, +91 96065 31882
Please refer my name, even you can show this video, he will help you with your requirements.
Hi Yogesh, thank you so much, with your reference I went ahead and got my head light bulb upgraded to phillips rally pro. And Rafel is a very good guy for this job.
I installed with relay philips rally pro 100/90 h4 bulb in my wrv and the bulb is 🔥👌 awesome it's very powerful im very happy to purchase this bulb im satisfied
Hello bro I am also thinking to upgrade to 90/100 in Honda amaze vx 2019 petrol. But I am confused that_
1. Will the head light of my car will get black over a period of time?..
2. Have you ever faced that the bulb is getting fused after upgrading to 90/100 h4 .
3 . are you getting heating issue or problem?..
Please reply me
@@odsahir6816 avoid excessive usage of high beam and by pass signal and use genuine philips bulbs and philips relay and wiring kit and turn of your lights at traffic signals.Everything will be fine.I am using 130/100w rally bulbs for my swift since a year and my reflectors are as good as new.High beam and pass signal are the main cause of bulb failure and reflector turning black along with cheap relay and wiring kit and counterfeit bulbs.
I have a query...kindly advise me . I installed Philips h4 rally bulbs 130/100 along with Philips relay kit in my alto car.
Initially was very happy with the upgrade, while driving on the highway but now am not satisfied.
So...what should i do now to upgrade the bulb.
1. Philips extreme vision ?
2. Philips racing vision ?
Since you already have a harness that will help, you could have used Philips Rally Pro 100/90 as the 130/100 might generate more heat and done can lose its reflective coating and front cover might fade. What you have is a better install, Philips RacingVision/Xtreme vision are not that powerful in front of your 100/90 mods. I have 130/100 installed in our native place for Alto LXi. It is still working fine. Check your dome is transparent and please use 100/90 rally pro if you see more heat is generated.
I have installed it today, but i have not installed relay with it,as mechanic told me that 90/100 bulbs don't require relay, relay is required for only 100/130 h4 bulbs... my question is that should i go with or without relay?..
@@odsahir6816 It depends on where did you install this. Not only the relay but relay along with harness is an added advantage for carrying more current for the 100/90W so the current is almost 40% extra from 65/55W, the wires and the bulb holder present are for the OE wattage 65/55W. In the long run there are chances of oxidation of wires and get deterioration for both wires and holder as well.
The harness has thicker wires and a relay with Ceramic Holder, hence for 100/90W it is recommended to protect the OE wires in the long run.
@@automotriztechnica I have gone to an out let of Maruti... They have told me stock holder is capable of handling 90/100 bulbs .... In fact he is using these 90/100 bulbs in his car ....
@@odsahir6816 If he is aware of the scenario on stock holder you can keep a check and monitor it every month if that is not deformed. By the way which Maruti Suzuki model you have fitted 100/90?
@@automotriztechnica I have swift dizer 2011 diesel...
@@odsahir6816 OK, The Rally Pro bulbs are very good for Swift & Desire models. Please keep a close watch on the OEM holders as these bulbs gets more heated; rest all should be OK 👍 if the Maruti technician has confirmed