Thanks a million for this video It helped me with the installation of the top cover, which for the life of me I couldn’t figure out, until I saw this video Thanks again 🎉
Thank you. The doors were driving me crazy. I released the back screws a little bit, aligned the doors and tightened them back in like you did. You saved my day.
Wow what the actual fuck, you helped us so much you don’t even know ! ❤️❤️❤️ the alignment was ass and now, with un- and -tightening the back panels it looked perfect thank you so much!
Maybe you can double check if the doors in front/main doors are positioned exactly perpendicular to the front? Maybe you can move them a little bit in order to make sure the front of the top is over the door edge properly (all the way it goes). Good luck!
Známý se dotazoval přímo společnosti IKEA na nosnost / zatížitelnost polic této vitriny. Byla mu sdělena nosnost 5 kilogramů na polici. Ještě ho zajímal materiál provedení rohových podložek skleněných polic, protože to může být klíčové z hlediska spolehlivosti. Jsou prý z plastu. Plasty často tzv. stárnou a mění tak své mechanické vlastnosti, v řadě případů k horšímu. Tím vším se stala tato vitrina zcela nedůvěryhodná pro můj záměr umístit v ní něco trochu těžšího a cennějšího. Když vidím, co všechno tam lidé dávají, říkám si, že mají velikou odvahu. Tak zas někdy, made in Sweden!
Embarrassing, but I didn't realize the doors needed to be open to install the top. It was tipped up and the silver screw were showing from the front and I felt like I was going crazy, couldn't figure it out!
Ikea designs recently are becoming less and less intelligent. the back of this cabinet should have been made of glass to let in more light.the black rear panel hides dark items.
Thanks a million for this video
It helped me with the installation of the top cover, which for the life of me I couldn’t figure out, until I saw this video
Thanks again 🎉
Thanks:) I'm really glad.
Thank you. The doors were driving me crazy. I released the back screws a little bit, aligned the doors and tightened them back in like you did. You saved my day.
That's perfect! Glad it worked for you:)
Thank you for posting this informative video. I was struggling getting the lid on until I watched your video!
This lady should write the instruction booklet.
Thank you. I wasted a good 30 minutes trying to figure this out before I found your video.
Thank you!!! We got it! This is what we needed
I'm glad it was useful :)
Had to watch this video and o get the top correctly seated. Lemme tell you this step drove me craaaaaaazy
the top instructions are totally not clear in the drawing 😂 thanks a lot!!!
Note that the front of the top must be pushed in all the way in order for it to reach the back.
Thank you ! Your instruction for putting top on saved me! 😊
I'm so glad!
Very helpful, also had a problem on the top cover
Wow what the actual fuck, you helped us so much you don’t even know ! ❤️❤️❤️ the alignment was ass and now, with un- and -tightening the back panels it looked perfect thank you so much!
I'm so happy I could help :)
So glad I could help:)
are the shelves adjustable?
Just spend 3 hours on that shit, thank you mate
Oh no, so glad I did something useful :)
Do you feel safe putting more books on the glass? im thinking of getting two myself to place some photgraphy and art books.
I actually do, the glass is really thick!
thanks for the video and this comment. Now I really want this rudsta @@babyleo4934
One back corner of our lid won’t go on! Any suggestions?
Maybe you can double check if the doors in front/main doors are positioned exactly perpendicular to the front? Maybe you can move them a little bit in order to make sure the front of the top is over the door edge properly (all the way it goes). Good luck!
Can build this by myself or will I need another person to help me?
You can build it yourself! I did.
The top on mine is to small! I don’t know what I’ve done wrong! I’ve built and rebuilt it for the last 5 hours
Známý se dotazoval přímo společnosti IKEA na nosnost / zatížitelnost polic této vitriny. Byla mu sdělena nosnost 5 kilogramů na polici. Ještě ho zajímal materiál provedení rohových podložek skleněných polic, protože to může být klíčové z hlediska spolehlivosti. Jsou prý z plastu. Plasty často tzv. stárnou a mění tak své mechanické vlastnosti, v řadě případů k horšímu. Tím vším se stala tato vitrina zcela nedůvěryhodná pro můj záměr umístit v ní něco trochu těžšího a cennějšího. Když vidím, co všechno tam lidé dávají, říkám si, že mají velikou odvahu. Tak zas někdy, made in Sweden!
Embarrassing, but I didn't realize the doors needed to be open to install the top. It was tipped up and the silver screw were showing from the front and I felt like I was going crazy, couldn't figure it out!
Ikea designs recently are becoming less and less intelligent.
the back of this cabinet should have been made of glass to let in more light.the black rear panel hides dark items.
I'm hoping to fit a mirror if room enough when mine arrive.
You don’t even show how you install the doors bad video