Kadjar Door Handle removal

Door handle removal.
Remove the cap at the end of the door,
use a T27 driver to undo the torxs screw.
It is captive so won’t fall out, I used a pair of pliers just to pull the screw back to release.
The handle end will then pull out.
All four doors are the same, even the drivers door with the lock in will just slide out.
The handle will slide a little to the rear of the car and can be unhooked and removed.
There are wires for the lock button and the hands free antenna is in there as well.
The handle cap will just prise off, I used a small flat driver and a trim tool just to work along each side forcefully but carefully, don’t slip or damage the handle.
I’ve got extra wires going in for handle leds, I ended up changing an led while I had it apart.
It’s a bit tight reassembling, as I have the extra wires. Normally it’ll just clip together.
Reassemble is the reverse.

[@igordalina6288]

Больше видео о разборке двери

[@eMkey1]

Hello which year is your Kadjar? i saw you have fitted auto boot lift, but most of the kits are for year 2016 (mine is 2015) does it makes any difference? or is it because all these sets are chinese and Kadjar was introduced in late 2016 in China? :)

[@darenhutch]

No all the years are the same, even the phase 2 facelift. The kit will fit any, until the actual body shell is changed

[@olegudacha8091]

Только камера снимает Не то что делают руки....