Kadjar door handle removal

Door handle removal.
Remove the cap at the end of the door,
use a T27 driver to undo the torxs screw.
It is captive so won’t fall out, I used a pair of pliers just to pull the screw back to release.
The handle end will then pull out.
All four doors are the same, even the drivers door with the lock in will just slide out.
The handle will slide a little to the rear of the car and can be unhooked and removed.
There are wires for the lock button and the hands free antenna is in there as well.
The handle cap will just prise off, I used a small flat driver and a trim tool just to work along each side forcefully but carefully, don’t slip or damage the handle.
I’ve got extra wires going in for handle leds, I ended up changing an led while I had it apart.
It’s a bit tight reassembling, as I have the extra wires. Normally it’ll just clip together.
Reassemble is the reverse.

[@HansVinkers]

Does anyone have the part number for the electric button?

[@Sickiey]

Nice Video , Cheers

[@jlmacd]

Drivers door - need to replace/repair the micro switch. Cannot get the end cap to come out despite trying to pull back on the Tx27 screw. Am I missing something here? Is there more to this on the drivers side because of the key mechanism? Don’t want to force it as it showed as coming away easily on the passenger side in your video.
To answer my own question: patience and the right size set of long nose pliers!
Once inside, the micro switch feels and sounds healthy and the aerial also looks undamaged.
Wondering now if there is a way of resetting the locking system …?

[@slicknwa]

I have to replace the door handle, cause the button doesn't work. Can I do it in this manner, or do I have to take the door pannel off?

[@darenhutch]

Do it like this, the cable should draw out the door so that it can be unplugged.
I couldn’t pull mine right out as I have extra cables for the led lighting.

[@HansVinkers]

Die you manage to find the right microswitch ? I'm in need of the part number