F5 fault ferroli domicompact f30b

Поделиться
HTML-код
  • Опубликовано: 21 окт 2024
  • F5 Fault ferroli domicompact f30b
    Heating and Boiler repair specialists in West Midlands
    www.3tgas.co.uk
    0800 9997870
    Instagram the_mental_gas_man
    MENTalk mental health advocate
    www.MENTalk.online
    Baxi ,Worcester Bosch , Viessmann, vaillant, ATAG, main , megaflo, ferroli, Ravenheat, navien , grundfos, wilo, Heatgeek, Intergas , talon , heatrae sadia , adey, boiler repairs , boiler servicing, central heating , boiler installation, new boilers , power flushing , vdi2035, magna clean , adey chemicals , faulty pumps , faulty pcb’s , diverter valves , balancing , efficiently , gas engineers

Комментарии • 8

  • @centralgasservicesni5368
    @centralgasservicesni5368 3 года назад +2

    Great video Stephen. Thanks for taking the time.

  • @theferroliman2067
    @theferroliman2067 3 года назад +2

    If F5 appears within about 10 seconds of heating or hotwater being called for its almost always the PCB and no 240v to fan ...if it's intermittent then the fan Venturi can be adjusted

  • @paulsmith2931
    @paulsmith2931 2 года назад

    Poor boiler, I started changing the o rings on the condense heat exchanger on these years ago when they first come out, only to get a recall that they were leaking again a few months later.

  • @1joelsmus
    @1joelsmus Год назад

    Great video, thank you

  • @tobycarter2357
    @tobycarter2357 Год назад

    Maaann, I replaced the fan on mine after seeing it try to start spinning but not. Then the new fan didn't spin up so I bought a multimeter and tested the 240v to find it wasn't receiving full voltage so replaced the PCB. Now the fan is spinning up but still getting the F5 error... I swear this things gonna drive me insane, but time to test the pressure switch :(

    • @scarmtb5550
      @scarmtb5550 20 дней назад

      Hi mate, i had same problem on this boiler, im only getting 25v at the fan harness.

  • @Sequencers
    @Sequencers 2 года назад

    Have the same fault my ferroli i29 today tested all i can ! No power to fan most likely a board fault 😖 time for a new boiler 😡

  • @locodriver601
    @locodriver601 3 года назад +2

    Very poorly made, water leaks from most joints. constant problems. Engineers do not know how to fix it. They change parts until it works.