The design of your parts are levels above the comp... Thank you for the tutorials. Very thorough and its very clear to me that you guys at TST are true professionals.
Thank you very much for this praise. We highly appreciate your kind words. Comments like yours prove to us that all the time, effort, and money spent on development of our parts is really worthwhile in the end.
did my install yesterday 4/21/24 on my zx4rr. huge difference aesthetically, and worth it. get the relay!!! also, thanks for the added cables for plug n play.
These are excellent instructions. Along with your sequential LEDs installation video. I got my front pair installed in a few hours. It was easy but took a while. Worth it because these lights look incredible !! Thank you tst for supporting our Ninjas !
I already love how the stock front turn signals looked compraed to other sportbikes where it sticks out, but damn, you guys managed to find a way to make it look even better, haha, but I am too lazy to take off the side fairing and replace the turn signals, last time I switched my stock fairings entirely to an aftermarket fairing kit I had to do that, but I'm gonna wait until the next time I switch out my fairings again (probably in a few months) but I'll definitely get these turn signals and swap 'em in then!
I think you will be very pleased. Hopefully you can share your before and afyer photos with us. Maybe that can get your bike into our Fan Fridays post on instagram
Will there be instruction videos for the other bikes this is compatible with? I have a 2013 ninja 300. I’m assuming it will be similar but there will be some differences.
The 300 will be at the shop on Wednesday and we will shoot the video that day. Then we will need a few extra days to edit, and soon thereafter the video will be public.
All these Ninja bikes break down differently. On the 1K there is the additional nuance of the lower edge of the signal well opening not matching up with our signals exactly the same as with the other N models. The assembly leaves a little gap that you can notice when really up close. Please weigh that in before you purchase these signals for a N1000
Perhaps if you have very little hands and fingers, and infinite patience. The fairings on this bike come off so easy that there is no need to struggle around that. I do this install in 15 minutes just the way I showed it if I am not yapping at the camera and not trying to get my body out of the way of camera lens.
Disappointed about the fact that an aftermarket part for a Japanese bike is not available for shipping to Japan! Any plans to ship to Japan in the future?
This is necessary! those stock blinkers on this bike should be illegal! They're so hard to see and in a bad area on the bike. odd how the z400 gets LEDs but not the 400...
We fell a little behind on manufacturing. The demand for these has been insane. We are making strides to increase manufacturing capacity. We should have more available soon.
I mean we showed the entire process, with no cut corners, and managed to do it in roughly 22 minutes. We can do it faster but wanted to be fully detailed.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
The design of your parts are levels above the comp... Thank you for the tutorials. Very thorough and its very clear to me that you guys at TST are true professionals.
Thank you very much for this praise. We highly appreciate your kind words. Comments like yours prove to us that all the time, effort, and money spent on development of our parts is really worthwhile in the end.
did my install yesterday 4/21/24 on my zx4rr. huge difference aesthetically, and worth it. get the relay!!! also, thanks for the added cables for plug n play.
Thanks for the love and support!
These are excellent instructions. Along with your sequential LEDs installation video. I got my front pair installed in a few hours. It was easy but took a while. Worth it because these lights look incredible !! Thank you tst for supporting our Ninjas !
@@MiguelRPD and thank you for supporting us!
I already love how the stock front turn signals looked compraed to other sportbikes where it sticks out, but damn, you guys managed to find a way to make it look even better, haha, but I am too lazy to take off the side fairing and replace the turn signals, last time I switched my stock fairings entirely to an aftermarket fairing kit I had to do that, but I'm gonna wait until the next time I switch out my fairings again (probably in a few months) but I'll definitely get these turn signals and swap 'em in then!
Thanks for the love man. Afte you mount these and you give the finished bike a glance, you'll be in love with the new look.
Just ordered the full lighting and fender elim kit for my 2021! Can't wait to get it
I think you will be very pleased. Hopefully you can share your before and afyer photos with us. Maybe that can get your bike into our Fan Fridays post on instagram
will the led relay work with my bike if it has stock indicators and taillight at the rear but these signals at the front?
Yes
Just bought the Hyperpack Tuesday so ready to get my '21 looking much cleaner. That rear fender and bulky signals gotta go.
Awesome to hear!
Good job TST team!
Already ordered my pair
Will there be instruction videos for the other bikes this is compatible with? I have a 2013 ninja 300. I’m assuming it will be similar but there will be some differences.
The 300 will be at the shop on Wednesday and we will shoot the video that day. Then we will need a few extra days to edit, and soon thereafter the video will be public.
I got the exact same looking from the previous owner uninstalled. But on the box it says otilli tho. Is it the same as these nexus?
@@vicvic5787 you must have a cheap dupe set.
@@TSTindustries butah what the snitch thx for answering I’m gonna give it try and if don’t work I’ll buy urs. Do u ship to Sweden?
@@vicvic5787 Yes, we ship to Sweden directly from our website.
I got it!
Thank u for tutorial.
If I bought the Hyperpack should it includ the relays from the tail lights and the front signal lights?
The bike's signaling system uses one relay to control the flash rate. Our replacement relay is included in the Hyperpack bundle.
Hi, do these lights have an E Mark Certification for Europe?
Can you do a video to make it more power just like the yamaha r3 please
Will this work on a 2023 Kawasaki ninja 400? Please and thank you.
Yes
Would this be the exact same process on my 19n1k as far as disassembly?
All these Ninja bikes break down differently. On the 1K there is the additional nuance of the lower edge of the signal well opening not matching up with our signals exactly the same as with the other N models. The assembly leaves a little gap that you can notice when really up close. Please weigh that in before you purchase these signals for a N1000
@@TSTindustries do you make one with a perfect fit for the n1k?
Where can I get that carbon fiber wheel fairing?
Do you mean front wheel fender? That's one of our products available on tstindustries.com
@@TSTindustries yes sorry lol the fenders.
Would it be possible to install without removing the fairings
Perhaps if you have very little hands and fingers, and infinite patience. The fairings on this bike come off so easy that there is no need to struggle around that. I do this install in 15 minutes just the way I showed it if I am not yapping at the camera and not trying to get my body out of the way of camera lens.
Will hyperflashing damage the turn signal or any other components?
Not at all.
Lovely, will you guys design a new headlight also?
Probably not, at least not any time soon.
I am Brazilian and would really like to buy your products for my Kawasaki Ninja 300. Do you sell on Aliexpress?
@@Robson3r no we do not.
I just bought them from your labor day sale 🎉
Great to hear!
Do you have this for an 05 kawasaki 636?
No, sorry. None of the pre-2013 zx6r/636 bikes will be compatible and we have not made plans to make any for the older generations.
My ninja 400 is TST'd out!
Tst frame sliders
tst fork sliders
tst swingarm sliders
tst integraded tail light
& now tst front turn siglnals
Wow..awesome. Hopefully you can send us some photos of your build. Maybe we can feature your bike in our Fan Fridays posts.
I got every one of these recently as well, currently installing in my living room as we speak! 😂
Thank u for tutorial 👍🏻👍🏻👍🏻
No problem 👍
Have outlet On Indonesia
Disappointed about the fact that an aftermarket part for a Japanese bike is not available for shipping to Japan!
Any plans to ship to Japan in the future?
Axxl.jp will have these real soon. You can pick these up there locally.
@@TSTindustries I saw they became available there. Purchased!
wow, plug n play? no relay? I'm definetly ordering!
Just ordered. Think this will ad to my custom build. / Giveaway.
Great pieces
We dont need a led flasher relay???
14:25 ...you should watch the entire video, the information is already there
@@TSTindustries oh my mistake, thank you very much 😉😉😉
@@nkvmttdd no worries. Hope you found our video informative
Donde se puede conseguir en mexico
The only place to buy these for now is through our website tstindustries.com
please do zx6r installation thanks
We already shot the 13+ and 19+ zx6r videos. It's just a few days to finish the edits
Damn it looks difficult to do all that just for a blinkers 😣 i'd pay for a Pro to do it for me
Price bosku
I don't know what that means.
This is necessary! those stock blinkers on this bike should be illegal! They're so hard to see and in a bad area on the bike. odd how the z400 gets LEDs but not the 400...
Looks dope. Unfortunately it's out of stock
We fell a little behind on manufacturing. The demand for these has been insane. We are making strides to increase manufacturing capacity. We should have more available soon.
how about 636 ? 😢
Install videos for the 2013-2018 and 2019+ models have been filmed and are being edited. We should make them live on RUclips early this upcoming week.
This is no 25 min job by far
I mean we showed the entire process, with no cut corners, and managed to do it in roughly 22 minutes. We can do it faster but wanted to be fully detailed.
Make ktm 390 integrated tail light
No thanks. That bike is not popular enough to recoup the expenses and opportunity cost involved in bringing a part like that to market.
Donde lo puedo conseguir en mexico