Many people have built AR recievers, you buy a forging for about $50 and mill out the cavity and tap the buffer tube hole. The high dollar tap is the killer, Tapco used to sell FAL forgings also in the day, and lots of folks milled them out. No biggy, just simple machine work.
you can make ad possess any fuck'n thing you like and long as you don try to sell it with out the propper paperwork, from a political standpoint, if that don't sound like nazi germany i don't know what does, freedom is enforced if you cant out gun a fledgling tyrant freedom doesn't stand a chance.
Easy as pie. Get an ak flat off of ak builder.com, have a welder, angle grinder, awl and straight edge, score the corners with the awl, score the corners with the angle grinder, tap and bend crisp with the hammer, tack weld along each crisp corner. Can't get simpler than this.
how about the tools and bits to grind off and punch old rivets? sandblaster to properly prep the receiver? real gun finish? new rivets? rivet pressing jigs? headspace gauges? (unless you want to blow out an eyeball)
The jigs are available online, as are the receiver flats. You'll need a complete parts kit, about $500 worth of tools, or really know what you're doing with basic tools, a means of precision shaping and heat treating. It can be done at home, but most people wind up with bubba monsters.
The press is cheap. I paid 120 for mine shipped. You can build on an NDS or other type receiver but you'll need a 4473 form. You will have great gun with minimal BS. What sucks about flat builds is theres fitting invloved. The front trunnion, the lower rails need to fit just right to have the bolt slide and lock up properly. You will need to heat treat the FCG axis pin holes and the ejector. You can heat to 1650f and quench to harden, then bring back up to 700-750f to annel. Or use Kasenit
I'm shaping three receivers now, though my tooling is not so sophisticated. You can build the entire rifle, except the barrel, in a well-equipped garage. Add a lathe and a heat treating oven (Which I have) and you could build the entire thing. Kick ass.
Impressive. I wish I could freakin build fully automatic weapons o.O. And that important part took u lil more than 5 minutes. But an AK is an AK. It takes a lot of love to get it done by hand. In afghanistan they make many guns by hand.. Sten gun, Ak, Lee Einfeld, PK machinegun (!!!), some handguns. And other self designed guns.
Well, I was able to finnish it up and it functions fine, other than buying the tap, had some trouble with mating to the upper from the forging but no biggy, My first attempt was to make it in two halves and bolt togather but looked stupid. All I have is an Old Bridgeport, and a bunch of Harbor Frieght tools. You just got to think it all out. I am buiding a 45-70 model 74 Gatling now, just from what I learned in High School Shop class in the 80s. Try it, its not that hard.
I thought about building one off a kit, and then doing a receiver like this but someone told me id need to get a headspace tool? Is that part hard to do? I know what its for but just curious of the difficulty involved in it.
Kasenit hardens the surface of the metal and does work just fine. Also if you build on a flat you will need to trim the top rails for the carrier. An AK is NOT an AR,. You build an AK, you assemble an AR. Oh the holes should use a water quench with lots of dish soap and salt added. You can use oil and that will carberize the surface but if you intend to Phosphate (Parkerize) the oil quench will fuck up the finish. The lower rails also need to be welded. And don't forget the swell neck rivets.
+Christan J Doom a AR 180 receiver could be folded but sadly there are no sources of Mil Surplus AR 180 or even AR 18 parts to finish one if some machine shop is looking a market tool up to make the rest of the parts
Very impressive, I must get myself a press, what do you use to cut the thick formers? that looks like 8mm steel, pain in the arse to cut with a grinder. oxy torch?
Supercomet32: The Army made changes to the M16 based on ease of loading ball propellant vs IMR flake propellant at LC. This changed the pressure curve in the gas system. Add in not training the troops on how to clean it, and it had some initial teething problems. Typically, someone insisting it "always" jams has either never fired one, or was poorly trained. As to whether or not I fired one in the military, my record is rather public since I write books on this subject. Later, dude;-)
It's just a joke when people mock AR reliability. The AK does poorly in mud but in sand and ice it does better than the AR. That's because the AR has tight tolerances so mud can't get in meanwhile sand and water/ice can whereas an AK has more gaps and looser tolerances so sand and ice can also get in but it doesn't cause problems because it can't fall out or get crushed but mud sticks to everything
If you want the best of both worlds, buy an AR-18, or the civilian model AR-180. That gives you the 5.56x45 round in a carbine that uses toaster stamp technology, looser tolerances for better reliability, and a gas piston like the AK-47. The AR-18 is my favorite 5.56mm rifle.
@thephilchannel He is making a receiver from a flat piece of sheet metal that has been stamped. They are called flats, than you bend them into the receiver shape.
all that metal on metal pounting and pressure seems to rough the surface up pretty bad.. and pre-drilled trunion holes is a risk because they dont always match up with the trunion, best to dril after the trunions been fitted
I think you mean God bless Mikhail Kalashnikov. But yes, also God bless America, for being one of the few countries where stamping out your very own AK47 is legal.
That's only if you're building a Class 3 item (Short Barreled Rifle being the most common). No BATF (federal) paperwork is needed when building your own gun. State may be different.
That an arbor press would fit on a a bench, my middle school had a really nice sheet metal brake that looked and worked just like one. Has anyone done this with a bench top brake?
i know from experience when i say unless you already have the tools, its going to cost a lot more to build one than buy one, so its only worth it for those that build many, or those who already have the equipment
@@getmeoutofsanfrancisco9917 yea even if it becomes illegal. That means my rights automatically get backed up by nature. And nature says guns are adaption.
Muy instructivo, armemos en rifle de asalto en casa!!, eso si, que no nos agarre un conflicto belico a mitad camino porque no llegamos mas a este paso!!
You can't press them because AR receivers are not stamped steel, that's fairly obvious. If you know anyone with a 3D printer you can manufacture your own lower receiver with plastic. If has been done before.
the 7.62 round has more power, but it's heavier, and causes more recoil. Both rifles are good. But you can't look at just power. In real world situations, like dust, sand, dirt, mud, water, the AK 47 is going to shine for the unconventional Fighter. The M16 and all variants are these perfect machines for a perfect world, which we don't live in. Both rifles have a good standing point, but any gun is better than no gun at all
@JohneyAmerica Yeah, the AR is a really good target rifle. I'd rather have an FAL or M-14 as I said I like .308. The AK is a great rifle that just keeps running.
AR 15 lower receiver - precision CNC milled, expensive chunk of aluminium, precision holes, precision every thing AK receiver - cut a few holes, and bend the bloody sheet of metal, puchase parts online, done
You can cast an ar out of pop cans and beer cans purchase parts online readily available.... you know how hard it is to find parts compatability and headspace an ak, If not than you don't know the struggles. I could assemble an ar for the most part blindfolded. The ak rifle is simple yet sophisticated at the same time, everything from metallurgy to dimpling and riveting.
no u cant press ar receivers but you can buy em 80% lower with no ffl and use a drill to drill out some holes......sounds easy which 8in turn is if you have the right tools but if ya got just a drill its gona take a few days and some patiences...its a pain....but unregistered and no ffl and LEGAL and CHEAP....but a pain in the ass
@davidgcalderone oh so it's done during the manufacturing process. I thought it was something one who wanted to "build" with a parts kit would have to do.
Yes, there are rules, those rules not only vary by state, but there are numerous federal rules that cover AOW and SBR's. It's a quagmire. Selling a gun you built is not a crime provided you didn't build it with the intent to sell. Sell one or two over the years and your fine... sell a bunch and you're gonna be in trouble if the ATF gets wind of it. Do your homework if you want to build and stay legal. For instance, you can't build an AK with more than 10 imported "bad" parts. (Section 922r)
Considering the fact that unless you are an FFL07/SOT you can't even BUILD a class 3 weapon other than a SBR/AOW, it's a moot point. SBR's and AOW's have their own rules... but a regular rifle or pistol (depending on how you build your gun is not subject to tax.) I could quote all day from that site, but the point is (and one that I should have acknowledged Lord666Belial for getting right) is that YOU need to know the law before you do try to sell or transfer any weapon.
@Storm469 Agreed...kinda. At close ranges the AK-47 is excellent because of its large round and rate of fire. However its accuracy is nothing comparable to an AR-15. However if someone blindly asked me to take one gun into combat. I'd take an AK-47 with a smile one my face.
Seth was correct, he said "ar-10" and not m16. AR-10 fires .308 and the m16 uses 223 rem.5.56. ak uses 7.62x39, more powerful than the 223 but not as powerful as the .308
@5687678 An engraving shop can put a number on for you, or you can buy a hammer stamping kit for $20- $50. Most states do not require a serial number so you should contact the state police and ask if you need one.
It looks like those are machined hardened steel flats not something you would pick up from a local service center. Probably a tool and die maker can build those flats.
lol yeah.. my buddy gage said he raided what was supposed to be an illegal gun factory in iraq, says that all they had was some chunks of steel, hammers, some patterns, a few old AK barrels and gas parts, and a shit load of files, and drill bits, oh and a few hand drills... and these guys were pumping out AK-47 parts and guns like it was easy cake... im like... UH... HOW?
The things people forget is that all gun designs start out in a garage of some sort. If you cut away the counter engineering of the firearm (special grooves, curves, and profiling cuts which have no actual function), you will see all small arms are very simple devices. That said, a lot of guns in the middle east aren't truly from scratch. Some are, but lots of them are parts or incomplete/damaged weapons they get from battlefield pickups or sold by other countries. Real "from scratch" work can be seen in southern asia and South America, where there is very little official importation of firearm related goods.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
The end is always the best. When you see the finished product. Nice work.
Many people have built AR recievers, you buy a forging for about $50 and mill out the cavity and tap the buffer tube hole. The high dollar tap is the killer, Tapco used to sell FAL forgings also in the day, and lots of folks milled them out. No biggy, just simple machine work.
"You can't make a gun and bypass government law, it's too expensive and percise!"
Said anyone who hasn't done a days worth of research or thought.
you can make ad possess any fuck'n thing you like and long as you don try to sell it with out the propper paperwork, from a political standpoint, if that don't sound like nazi germany i don't know what does, freedom is enforced if you cant out gun a fledgling tyrant freedom doesn't stand a chance.
Nice bro! Love the home made tools.
In Pakistan they do this with a hammer and a pair of pliers.
I did mine Pakistani style
They do, while sitting on the ground , or pile of dirt ,and sand. Stools ,and workbenches take up too much room I guess !!!
Do you have a video of it or post the link
@RadicalApex
I don't see how building a weapon could be simplier than this. Even a Sterling can be a bit more complex.
you need to thread a sterling.
"have hammer make ak" (drinks vodka straight from bottle; soviet national anthem intensifies.)
This is an excellent vid, i cant wait to build some of my own one day. Great job.
Easy as pie. Get an ak flat off of ak builder.com, have a welder, angle grinder, awl and straight edge, score the corners with the awl, score the corners with the angle grinder, tap and bend crisp with the hammer, tack weld along each crisp corner. Can't get simpler than this.
how about the tools and bits to grind off and punch old rivets? sandblaster to properly prep the receiver? real gun finish? new rivets? rivet pressing jigs? headspace gauges? (unless you want to blow out an eyeball)
The jigs are available online, as are the receiver flats. You'll need a complete parts kit, about $500 worth of tools, or really know what you're doing with basic tools, a means of precision shaping and heat treating. It can be done at home, but most people wind up with bubba monsters.
For jigs link please complete parts list, of oola send link
@gp6957 google it yourself buddy. this comment is sixteen years old
Great video man. This should be posted on AK47 . net 's forums.
The press is cheap. I paid 120 for mine shipped. You can build on an NDS or other type receiver but you'll need a 4473 form. You will have great gun with minimal BS. What sucks about flat builds is theres fitting invloved. The front trunnion, the lower rails need to fit just right to have the bolt slide and lock up properly. You will need to heat treat the FCG axis pin holes and the ejector. You can heat to 1650f and quench to harden, then bring back up to 700-750f to annel. Or use Kasenit
I'm shaping three receivers now, though my tooling is not so sophisticated.
You can build the entire rifle, except the barrel, in a well-equipped garage. Add a lathe and a heat treating oven (Which I have) and you could build the entire thing. Kick ass.
Impressive. I wish I could freakin build fully automatic weapons o.O. And that important part took u lil more than 5 minutes. But an AK is an AK. It takes a lot of love to get it done by hand.
In afghanistan they make many guns by hand.. Sten gun, Ak, Lee Einfeld, PK machinegun (!!!), some handguns. And other self designed guns.
True. This happens to some Chinese made AKs as well. Quality control. Still, this does happen. People convert semi-auto into full auto.
Well, I was able to finnish it up and it functions fine, other than buying the tap, had some trouble with mating to the upper from the forging but no biggy, My first attempt was to make it in two halves and bolt togather but looked stupid. All I have is an Old Bridgeport, and a bunch of Harbor Frieght tools. You just got to think it all out. I am buiding a 45-70 model 74 Gatling now, just from what I learned in High School Shop class in the 80s. Try it, its not that hard.
I thought about building one off a kit, and then doing a receiver like this but someone told me id need to get a headspace tool? Is that part hard to do? I know what its for but just curious of the difficulty involved in it.
Kasenit hardens the surface of the metal and does work just fine. Also if you build on a flat you will need to trim the top rails for the carrier. An AK is NOT an AR,. You build an AK, you assemble an AR. Oh the holes should use a water quench with lots of dish soap and salt added. You can use oil and that will carberize the surface but if you intend to Phosphate (Parkerize) the oil quench will fuck up the finish. The lower rails also need to be welded. And don't forget the swell neck rivets.
+Christan J Doom a AR 180 receiver could be folded but sadly there are no sources of Mil Surplus AR 180 or even AR 18 parts to finish one if some machine shop is looking a market tool up to make the rest of the parts
Very impressive, I must get myself a press, what do you use to cut the thick formers? that looks like 8mm steel, pain in the arse to cut with a grinder. oxy torch?
Welcome. I'm currently deployed to the Sandbox and having no issues with my weapon. Graphite lube and occasional dustoff.
You can buy stripped upper and lower receivers and build from there but you can't press out AR receivers can you?
Supercomet32: The Army made changes to the M16 based on ease of loading ball propellant vs IMR flake propellant at LC. This changed the pressure curve in the gas system. Add in not training the troops on how to clean it, and it had some initial teething problems. Typically, someone insisting it "always" jams has either never fired one, or was poorly trained. As to whether or not I fired one in the military, my record is rather public since I write books on this subject. Later, dude;-)
It's just a joke when people mock AR reliability. The AK does poorly in mud but in sand and ice it does better than the AR. That's because the AR has tight tolerances so mud can't get in meanwhile sand and water/ice can whereas an AK has more gaps and looser tolerances so sand and ice can also get in but it doesn't cause problems because it can't fall out or get crushed but mud sticks to everything
@Storm469 Both are great rifles. only problem is they have a ton of recoil
what is the tipo of metal do you use?, stamped i guess but his thikness?? Thank you.
If you want the best of both worlds, buy an AR-18, or the civilian model AR-180.
That gives you the 5.56x45 round in a carbine that uses toaster stamp technology, looser tolerances for better reliability, and a gas piston like the AK-47. The AR-18 is my favorite 5.56mm rifle.
What paper work do you need to get a serial number? and where can you get it punched onto the receiver?
Great job. Thanks, this is all the info I need.
@thephilchannel He is making a receiver from a flat piece of sheet metal that has been stamped. They are called flats, than you bend them into the receiver shape.
Thanx for this video btw. It is quite helpful.
Can you build an 155mm Cannon?
all that metal on metal pounting and pressure seems to rough the surface up pretty bad.. and pre-drilled trunion holes is a risk because they dont always match up with the trunion, best to dril after the trunions been fitted
Pregunta, de cuanto es el ancho del receiver?
I can't help but laugh at how simple this is to do. God bless America😂
I think you mean God bless Mikhail Kalashnikov. But yes, also God bless America, for being one of the few countries where stamping out your very own AK47 is legal.
That's only if you're building a Class 3 item (Short Barreled Rifle being the most common). No BATF (federal) paperwork is needed when building your own gun. State may be different.
Great vid!
That an arbor press would fit on a a bench, my middle school had a really nice sheet metal brake that looked and worked just like one. Has anyone done this with a bench top brake?
In the US it is legal to buid your own gun.
in theory, I can make a receiver of AK following these steps published?
dont you need a ffl to buy the reciever? been looking online and cant find anybody who will sell one without a ffl
i know how to build this but the only problem i have is that i cant find exact mesaruments
You can't do that with an AK either. How do you rivet the trunnion to the receiver with a hammer?
Do you have a list of tools that you're using and where to get them?
I enjoyed your vid have you got the plans or drawings I can't find any plans
thanks
bill
Maybe that would explain why I've seen so many explode in the users hands.
@@Lvl18Meep Lol
very good job my friend, very good job
What I want to know is where can I purchase a jig like that?
Where did you get the jig??
Muito bom, como faria um magazin tipo uzi, existe gabarito para o mesmo.
very intersting. good job
neat ive always wanted to see how they are made
i hope he heat treated the steel to harden it after bending because bending will cause metal fatique to weaken the steel.. heat treating fixes that
i know from experience when i say unless you already have the tools, its going to cost a lot more to build one than buy one, so its only worth it for those that build many, or those who already have the equipment
Will this still be legal if the gun ban goes into effect?
it's what the rest of the rifle is riveted to, magazine is fed, trigger assembly, front/rear trunion, etc...
@Duckyistrippin yes you can you cant build to sell without a license but if you built it and after a while you dont want it you can sell it
Thank you for the new shoes !
C&c general's gla quote? Lol
@TKKskynyrd home builds don't require registration.
That's why you build it yourself and dont tell them you have it. :)
You don't need to. My brother has built a bunch of guns like this. All legal, no reg needed.
@@getmeoutofsanfrancisco9917 yea even if it becomes illegal. That means my rights automatically get backed up by nature. And nature says guns are adaption.
how many millimeter?
Muy instructivo, armemos en rifle de asalto en casa!!, eso si, que no nos agarre un conflicto belico a mitad camino porque no llegamos mas a este paso!!
What jig is that?
Bolt and spring how making P
rocess
I recentlly obtained a krinkov kit in 7.62* 39its a side folder and I need help finding the proper body can anyboypointme out in the right direction?
Is this whole process legal???
Because if it is , I'll be supplying my own little army pretty soon
LaRue can I join your army lol
You can't press them because AR receivers are not stamped steel, that's fairly obvious. If you know anyone with a 3D printer you can manufacture your own lower receiver with plastic. If has been done before.
very nice..i am proud of you.....and i mean it..
the 7.62 round has more power, but it's heavier, and causes more recoil. Both rifles are good. But you can't look at just power. In real world situations, like dust, sand, dirt, mud, water, the AK 47 is going to shine for the unconventional Fighter. The M16 and all variants are these perfect machines for a perfect world, which we don't live in. Both rifles have a good standing point, but any gun is better than no gun at all
What kind of jig is that and where can I get one?
ak-builder.com/index.php?dispatch=products.view&product_id=30083
@JohneyAmerica Yeah, the AR is a really good target rifle. I'd rather have an FAL or M-14 as I said I like .308. The AK is a great rifle that just keeps running.
what does this do to it.
Thats neat.......I love my AK.
AR 15 lower receiver - precision CNC milled, expensive chunk of aluminium, precision holes, precision every thing
AK receiver - cut a few holes, and bend the bloody sheet of metal, puchase parts online, done
Lol
You can cast an ar out of pop cans and beer cans purchase parts online readily available.... you know how hard it is to find parts compatability and headspace an ak, If not than you don't know the struggles. I could assemble an ar for the most part blindfolded. The ak rifle is simple yet sophisticated at the same time, everything from metallurgy to dimpling and riveting.
@pullnshoot25 but you cant ever sell them
no u cant press ar receivers but you can buy em 80% lower with no ffl and use a drill to drill out some holes......sounds easy which 8in turn is if you have the right tools but if ya got just a drill its gona take a few days and some patiences...its a pain....but unregistered and no ffl and LEGAL and CHEAP....but a pain in the ass
I know this video is 12 years old but do you have the plans for this?
@davidgcalderone oh so it's done during the manufacturing process. I thought it was something one who wanted to "build" with a parts kit would have to do.
Yes, there are rules, those rules not only vary by state, but there are numerous federal rules that cover AOW and SBR's. It's a quagmire.
Selling a gun you built is not a crime provided you didn't build it with the intent to sell. Sell one or two over the years and your fine... sell a bunch and you're gonna be in trouble if the ATF gets wind of it.
Do your homework if you want to build and stay legal. For instance, you can't build an AK with more than 10 imported "bad" parts. (Section 922r)
Considering the fact that unless you are an FFL07/SOT you can't even BUILD a class 3 weapon other than a SBR/AOW, it's a moot point. SBR's and AOW's have their own rules... but a regular rifle or pistol (depending on how you build your gun is not subject to tax.)
I could quote all day from that site, but the point is (and one that I should have acknowledged Lord666Belial for getting right) is that YOU need to know the law before you do try to sell or transfer any weapon.
ok got it so i could be the barrel or the shells ejejctor (i don't know how is called in english coz i'm italian)
but what is it thie receiver??
@Storm469
Agreed...kinda. At close ranges the AK-47 is excellent because of its large round and rate of fire. However its accuracy is nothing comparable to an AR-15.
However if someone blindly asked me to take one gun into combat. I'd take an AK-47 with a smile one my face.
Depend on if u are chambered in 556 or 762 not on if it is an AR or AK .both as accurate as u make them 762 will b 100 yards + on average
Lol I was only looking for How To Make Origami video's untill I saw this video...
I'm sure a guy with the equipment and know how also has the lisence.
All I did with mine was score the bend areas with an angle grinder. bend it crisply, then weld it back together.
Wow this video was posted 10 days before I was born.
How would you go blind? Bearing press, safety glasses, if you know how to use the tools involved, you know enough not to get hurt.
There’s something magical called accidents ever heard of them
Seth was correct, he said "ar-10" and not m16. AR-10 fires .308 and the m16 uses 223 rem.5.56. ak uses 7.62x39, more powerful than the 223 but not as powerful as the .308
@5687678 An engraving shop can put a number on for you, or you can buy a hammer stamping kit for $20- $50. Most states do not require a serial number so you should contact the state police and ask if you need one.
wow the jig that guy made for that is amazing. fuck more work in that than there would be for alot of the acctul gun
Top lindo trabalho parabéns 👏
Thanks!
It looks like those are machined hardened steel flats not something you would pick up from a local service center. Probably a tool and die maker can build those flats.
Is this legal?
No limit. You would get in trouble if someone thought you were selling them without a license though
Sweet!
lol yeah.. my buddy gage said he raided what was supposed to be an illegal gun factory in iraq, says that all they had was some chunks of steel, hammers, some patterns, a few old AK barrels and gas parts, and a shit load of files, and drill bits, oh and a few hand drills... and these guys were pumping out AK-47 parts and guns like it was easy cake... im like... UH... HOW?
The things people forget is that all gun designs start out in a garage of some sort. If you cut away the counter engineering of the firearm (special grooves, curves, and profiling cuts which have no actual function), you will see all small arms are very simple devices. That said, a lot of guns in the middle east aren't truly from scratch. Some are, but lots of them are parts or incomplete/damaged weapons they get from battlefield pickups or sold by other countries. Real "from scratch" work can be seen in southern asia and South America, where there is very little official importation of firearm related goods.
iS IT?
Yes, you just have to follow the rules.
@Storm469 they make 308 AK's XD, saiga builds them.
@Bread996 well hell yeah. but this shows anything is possible.
nice!!!
Good video, but I would rather buy a receiver, and the whole gun for that matter from Izmash in Russia.