This is How I Replace Quarter Panels With Rolled Hemmed Flanges
HTML-код
- Опубликовано: 16 фев 2024
- Check out my shop for all toolslinktr.ee/AUTOBODYTECH
Kia Carnival Right Quarter Panel Section
As an Amazon Associate, I earn a small commission from qualifying purchases. Some of the links are affiliate links and if you decide to buy the tools through them I earn a tiny commission. It costs you nothing but helps me big time.
Astro Pneumatic DS1000 Pneumatic Door Skinning Toolamzn.to/3uuEoEg
Slapping Filehttps//amzn.to/49vFKOu
Slide Hammerhttps//amzn.to/4bNL2q2
Wiggle Wirehttps//amzn.to/3TcR8ZV
7 Piece Dura Block Sanding Kit:amzn.to/48xvNj3
Steck Quarter Panel Puller 20022:amzn.to/48NjvCJ
Astro Pneumatic Tool 930 Mini Reciprocating Air Sawamzn.to/41SYQeq
Sunex SX8200 Surface Blaster Kit:amzn.to/48J7Swz
The MAXI - 220v:www.dentfix.com/shop-1/The-MA...
Evercoat Rage OPTEX Color Changing Filler:amzn.to/3OhiHhR
Evercoat 425 Metal Glaze Ultra 30oz:amzn.to/492KXg7
Canadian Tool and Supply 7-Inch Air Angle:amzn.to/3tJ2zOQ
Wurth 1/4" ANGLED 90 DEGREE DIE GRINDER:shop.wurth.ca/general-tools/p...
Mirka MR-6 Finishing Sander:amzn.to/3vrjje5
Body Line Tool:amzn.to/432Hk7Z
Martin 1024 9" Blade Surfacing Spoon:amzn.to/3SbJ8I5
Uni spotter 5500:www.toolsource.com/stud-welde...
3M Belt Sander:amzn.to/48qO4hI
Milwaukee M12 FUEL 3/8 Stubby Impact:amzn.to/3H9va2V 
Авто/Мото
Thank you for watching! Comments welcome!
Product links in the description above☝Want to support the channel?
Shop Amazon with my affiliate link:amzn.to/3v3OOep
(it costs you nothing but helps me big time)
The best autobody channel I've ever seen. Simple detailed videos with no annoying music. Thank you
Wow, thanks!
Removing that front door by yourself 💪🏻
You made some very skilled work easy to watch. What a great channel !
Thank you very much!
superb vid thanks, careful considerat repair,
such a joy to see young men doing quality workmanship, thank you from an old man 75,London UK
Nice work man, good to see someone that takes pride in their work and follows procedures
I appreciate that!
Amazing work!
Awesome content, keep up the great work
Hi Brother how are you
Where are you form
I'm auto body Dentar
Your work is so awesome
Hats off you
Love from Mumbai (INDIA)
From Canada, thanks!
great advice , good job !
Nicely done!
hey phil, its vk lol. Love your channel bro keep it up.
Thanks yo!! Appreciate it!
Great job as usual 10/10😊
Thank you! 😄
Really enjoy your videos. The editing is always on point. What is the timeframe for doing something like this? How many hours does it take? Do you work on only one project at a time?
Something like this takes a solid 20 hours of working time from start to finish and mostly one big one like this at a time with multiple other small to medium jobs
I use harbor freight self tappers like a disposable item. Saves a lot of time on my restoration. I also bought some 8mm spot weld drill bits that have been fantastic. I was going through belts like crazy. But also, I’m trying to refit original panels in mostly, so that’s a bit different than your daily routine.
Nice work what tool is that on the flang
It's the astro pneumatic ds1000. I have amazon link to it in the description
Beautiful work. No need to apply filler after that pneumatic hamming tool?
Nope! There's a bit of a learning curve for it, but once you get the hang of it. You'll never go back to doing it by hand, haha
Nice work
Thank you!
lastly...what do you think is the quickest way to grind down Mig welds such as the very top of your 1/4 install?
I normally start off with a cut off wheel and a thick grinding disc. I've done a video on this called "finishing c-pillar joint like a pro"
should check it out !!
will do, thx@@AUTOBODYTECH
Young man i reallly like your work i wonder on a older car like a 1985 ae86 welding a quarter panel would it be challenging for a man in your profession
I think it would be quite similar. The metal thickness may be a little different though
You guys need to invest in a door hanging tool make’s like much easier 😂
The hockey puck being rubber, does it cause less damage vs a metal dolly when working a flange over like that? How does energy transfer differ from the two? Noob question from an apprentice lol
the hockey puck is just the perfect hardness where as the metal dolly could create some damage because of the hard metal edges(no give). alternatively a metal dolly with a few strips of masking tape will also do.
I will be doing a video on how to correct small damage or waves when doing a hemmed flanged in the future. stay tuned!
what structural adhesive do you use? seems like that would be excellent to keep water out of the wheel arch after the spot welds ... does the adhesive interfere with the welding at all?
and what is the anti-flutter brand?
The structural adhesive is SEMs structural adhesive and no problems with spot welding. I actually think it welds even nicer with it..
I actually used SEMs 1 part sealant here but they have an anti flutter. I believe it's called expanding urethane foam. It's a 2-part product.
thanks@@AUTOBODYTECH
welldone mate, how much is that spot welding, thanks
Thanks! Too much around 8k I believe
What are your thoughts about using silicon bronze when welding seams ??
I've never tried but have been very curious! I heard it's really good. What are your thoughts/experience?
How did you know the 3 sectioning locations at about 3:45?
@@kennyscott1996 alldata has the oem procedure
What a rip off! Those damages could have been buffed out lol. Seriously tho, that a sold job
Such a magnificent job and yet all the exposed joints are ready to rust in no time...sh.t
How many hours does a job like this pay? If you don't mind me asking.
A typical quarter panel replacement pays about 14 - 18 hours
How much was this repair?
around 7000$