Everyone says they can't find the mod on the web, but it's plainly in the manual that comes with the amp and you can download that from the web ! And you don't have to pull the top as you can get to it behind the little removeable panel on the rear.
I bellieve you are correct, however I bought this used and the manual I found online did not discuss this modification. I don't know if it is newer or older than manuals that do.
Just curious where do you buy the plastic screwdriver 🪛 to adjust the Aux control. Perhaps a link a specific size? Thank you for this vital info. Definitely going to save..
Hello Sir , so what exactly does it modify with in the circuit also does it affect the performance ? and finally where did you source the modification from please sorry to ask so many questions I'm assuming its the export mod for european countries
This modification allows you to use the "Aux" Band switch to amplify the 12 meter and 10 meter bands. The green wire grounds out the coils used to accomplish this. Cutting the green wire simply enables that circuit. I have been told this modification is included in at least one version of the manual. I learned of it from a search for documentation. At that time I did not find any videos or photos so did not know the wire is also accessible via the service cover on the back of the unit.
It's not actually an export mod, that would be a mod that would only be legal in other countries. There is a regulation in the US that keeps these from being SOLD with the ability to TX on 11 meters. HOWEVER, a licensed amateur in the US can mod this for 10/12 meter operation, which includes 11 meters, and that's legal. So... we end up with this mess. It can't do it from the factory from controls on the front and it's not obvious inside so it makes the FCC happy. The source of the mod is Ameritron themselves. It's the reason they designed it like this. It has the 10/12 meter input tuning coil built in, complete with a hole in the back to tune it just like the other bands, just this little wire grounds the input when the band switch is set to AUX (10/12 meters). Clip that wire and boom, 10/12 meters, and also 11 meters just because of the way things work.
Well, I posted this video because I couldn't find one about it and didn't realise the door was opposite the wire until I had the cover off so maybe that's why?
I don't own an 811, only an 811H which is what is shown being modified here. The mod works GREAT by the way. According to Google ... "The Ameritron AL-811H is similar to the AL-811, but with four fully neutralized 811A transmitting tubes for 800 watts of power, compared to the AL-811's 600 watts. The AL-811H also has a loud fan, while the AL-811 has a quiet fan. Reviews note that both amplifiers are quiet and easy to tune." If that is the only difference, I would expect it to work, but you are on your own here. However, if you do it, come on back and let us know how it turned out! (Fingers crossed.)
Наука
you should also get the proper tuning stick and tune the aux port for lowest swr as well after cutting the wire
Amateur just means we don't get paid for it.😹😹Exactly the way an instructional video should be. Straight & to the point. Thx k4ceg
Everyone says they can't find the mod on the web, but it's plainly in the manual that comes with the amp and you can download that from the web ! And you don't have to pull the top as you can get to it behind the little removeable panel on the rear.
I bellieve you are correct, however I bought this used and the manual I found online did not discuss this modification. I don't know if it is newer or older than manuals that do.
Can you do a video on the " SWR tuning ports on the back". I don't understand why. Would you not just use , say a Palstar tuner ???
Any idea how to do a 10 meter mod on a command 1200 ? Ty
@Woody Phillips does that open 11 meter to?
yes
Just curious where do you buy the plastic screwdriver 🪛 to adjust the Aux control. Perhaps a link a specific size? Thank you for this vital info. Definitely going to save..
I bought a package on Amazon. I have not had to use them yet. I believe theywere about $10USD
@@WoodyPhillips were they a special size
@@SFLightfoot I din't use them, but they were small enough to fit in the tuing holes.
@1:37 you say you "put a little flag on it for the 80 meter mod", I'm guessing you meant to say the 10 Meter mod ... Right ?
Hello Sir , so what exactly does it modify with in the circuit also does it affect the performance ? and finally where did you source the modification from please sorry to ask so many questions
I'm assuming its the export mod for european countries
This modification allows you to use the "Aux" Band switch to amplify the 12 meter and 10 meter bands. The green wire grounds out the coils used to accomplish this. Cutting the green wire simply enables that circuit. I have been told this modification is included in at least one version of the manual. I learned of it from a search for documentation. At that time I did not find any videos or photos so did not know the wire is also accessible via the service cover on the back of the unit.
It's not actually an export mod, that would be a mod that would only be legal in other countries. There is a regulation in the US that keeps these from being SOLD with the ability to TX on 11 meters. HOWEVER, a licensed amateur in the US can mod this for 10/12 meter operation, which includes 11 meters, and that's legal.
So... we end up with this mess. It can't do it from the factory from controls on the front and it's not obvious inside so it makes the FCC happy.
The source of the mod is Ameritron themselves. It's the reason they designed it like this. It has the 10/12 meter input tuning coil built in, complete with a hole in the back to tune it just like the other bands, just this little wire grounds the input when the band switch is set to AUX (10/12 meters). Clip that wire and boom, 10/12 meters, and also 11 meters just because of the way things work.
The wire in my ameritron is yellow build date April 2001
Dont you have adjust for swr how you do that please
Use the initial settings given in the manual for 10 and 12 meters and tune it as you would for other frequencies.
Shows right in the manual how to do it
Thats it just cut the green wire and can use it on CB channels
I would not do that myself. This mod does allow you to use the amp for 10 and 12 meters though.
I find funny why nobody do the mod removing the tiny rear cover plate with the 4 screws, no need to open the amp
Well, I posted this video because I couldn't find one about it and didn't realise the door was opposite the wire until I had the cover off so maybe that's why?
Has anyone confirmed 100% that this is the same mod for the Ameritron 811 as well? (then the AUX switch position becomes the 10m/12m band selector?)
I don't own an 811, only an 811H which is what is shown being modified here. The mod works GREAT by the way.
According to Google ... "The Ameritron AL-811H is similar to the AL-811, but with four fully neutralized 811A transmitting tubes for 800 watts of power, compared to the AL-811's 600 watts. The AL-811H also has a loud fan, while the AL-811 has a quiet fan. Reviews note that both amplifiers are quiet and easy to tune." If that is the only difference, I would expect it to work, but you are on your own here.
However, if you do it, come on back and let us know how it turned out! (Fingers crossed.)
@@WoodyPhillips My question is directed to owners of the 811 NOT the 811H as we know it works for the 811H.
80meter mod? don't you mean 10meter mod?
I misspoke. It says 10 M Mod on the flag.
80m mod?
I misspoke. It says 10 M Mod on the flag.
Why do you refer to your flag on the cut wire as: "80 Meter mod" ?????
I misspoke. It says 10 M Mod on the flag.
just remove the small panel cover on the back its right there to cut
This is correct. However, I did not discover that until after I made the modification.