2006 Corolla: Read for easier method. First off, thank you for this video. I changed my pump 2.5 years ago using this video as my guide...it's the best out there! Unfortunately the Amazon pump didn't last long. On an 06 Corolla the pump does not face back to the tire, it faces out to the street. EASIER METHOD: 1. No need to take off the tire! Turn the wheel to the right as far as it will go. You don't need any more room then that. Trust me I've done it twice. 2. Pop off the snap clips in the wheel well and go under the car and undo the two screws. Wiggle the liner and you'll see the two screws that need to be undone. The car does not have to be jacked up as it easily reachable. 3. Pull the wheel well liner back (it's very flexible) This will expose a single screw that need to be undone that bolts the fender corner on. Undo it and pull the fender back and follow the seem just under the light and there is a little black tab that needs to be pushed in with a screwdriver. After that you can pull the fender back enough and wedge a screw driver handle in between to keep it pried open. That's all the room you'll need for the swap. If it's hard to follow along just watch the video to get the gist of what I'm saying. Good to have some extra Christmas tree fasteners as they are easy to break.
My friend removed the wheel for one reason and one reason only: so you can see a better and clearer picture of what I'm doing. The wheel restricts the view of the windshield washer pump quite a bit 😁😁
Thanks for this. I watched another video where they took the wole front bumper/apron off, which I was dreading with all those fiddly clips. Just un-clipping and getting put back together, much better way to go.
My 04 Corolla seems to be a bit different. I tried doing it without taking the whole wheelwell cover off but I guess I'll haveto because I couldn't see the pump let alone take it out! Great guitar work too!
Nice job! Very helpful. The only thing I did differently was to not take off the tire. Trying to save time because it's cold here today 😁. I was hoping to unclip just enough of them to get my hands in there which worked for getting the old one out but I couldn't find a way to put enough pressure on it to get the new one in so I ended up taking out all of the screws and clips like you did. Even after that I couldn't get the new one in, but now with more room to work with I used a 4" C-clamp to put enough force on the new pump to get it properly seated. Working great now! Thanks!
I bought a Corolla 2012 in Pakistan and My motor was not working , i send this to my Electrician he will Resolve this issue now thanks for making this Video Amazing Content !
I also had no idea exactly where they were until I discovered it while searching, as I discovered many other things. Conclusion: As you search you discover new things.
@@giwrgosgiann278 Φίλε μου πρέπει να σου έδωσα λάθος απάντηση και συγνώμη για αυτό. Τώρα που βλέπω το βιβλιαράκι του αυτοκινήτου, αυτή η ασφάλεια βρίσκεται κάτω από τον πίνακα οργάνων και είναι η Νο 16 με χωρητικότητα 15 Αμπέρ (Windshield washer). Αλλά για απόλυτη σιγουριά θα το ελέγξω αύριο στο αυτοκίνητο μου και θα σου πω οκ; Έχουμε ακριβώς το ίδιο μοντέλο αυτοκινήτου;
@@YiannisPagonis εμενα είναι e12 hatchback 2004 μοντέλο με 4zz κινητήρα.θα το δω και θα σου πω ..δεν αντιδρά στο πάτημα είτε να πετάξει μπροστά είτε πίσω νερό ..πιθανών να τα χει παίξει το μοτερακι
@@giwrgosgiann278 Τα αυτοκίνητα μας είναι διαφορετικής γενιάς. Το δικό σου είναι 9ης γενιάς ενώ το δικό μου 10ης γενιάς, οπότε έχουμε διαφορές γενικότερα. Αλλά η θέση αυτής της ασφάλεια πρέπει να βρίσκεται κάτω από το ταμπλό. Όταν πατάς τον μοχλό των υαλοκαθαριστήρων ακούς κάποιον ήχο από την αντλία;
@@YiannisPagonis oh thank you my friend, but i have same connector on my car but only on the left side with the washer pump.. on the right side is none
@@YiannisPagonis Well I live near Chicago and nothing is coming out of my sprayers. I dont hear any pump sound and the fluid is topped off and not leaking.
@@adriancampos2524 Make sure the washer nozzle jets are free. The problem could be that your windshield wiper nozzles are clogged. Listen to see if you can hear the washer pump running. The best way to do this is with the ignition on but the engine not running. That way it will be easier to hear. Get a helper. You’ll need someone to push or turn the knob while you listen. If you can hear the motor running, that’s great. If you still do not hear the washer pump working then check its fuse or the washer pump itself.
Hi, is there any difference between the placement of widshield washer pump in Toyota corolla e12 2002 1.6 vvti and Toyota corolla 2008? btw. great video, very infomative and clear. thx!
Thank you very much. Awesome video and straight to the point. No pointless and annoying dialogue explaining what’s happening
Thanks my friend and always be good.
Toyota is absolutely fantastic. Nothing on the car you can’t replace yourself
But the accessibility is ludicrous.
2006 Corolla: Read for easier method.
First off, thank you for this video. I changed my pump 2.5 years ago using this video as my guide...it's the best out there! Unfortunately the Amazon pump didn't last long.
On an 06 Corolla the pump does not face back to the tire, it faces out to the street.
EASIER METHOD:
1. No need to take off the tire! Turn the wheel to the right as far as it will go. You don't need any more room then that. Trust me I've done it twice.
2. Pop off the snap clips in the wheel well and go under the car and undo the two screws. Wiggle the liner and you'll see the two screws that need to be undone. The car does not have to be jacked up as it easily reachable.
3. Pull the wheel well liner back (it's very flexible) This will expose a single screw that need to be undone that bolts the fender corner on. Undo it and pull the fender back and follow the seem just under the light and there is a little black tab that needs to be pushed in with a screwdriver. After that you can pull the fender back enough and wedge a screw driver handle in between to keep it pried open. That's all the room you'll need for the swap.
If it's hard to follow along just watch the video to get the gist of what I'm saying.
Good to have some extra Christmas tree fasteners as they are easy to break.
My friend removed the wheel for one reason and one reason only: so you can see a better and clearer picture of what I'm doing. The wheel restricts the view of the windshield washer pump quite a bit 😁😁
EXCELLENT TUTORIAL !!!! Thank you very much from Montreal Canada
You are welcome my👭👬👫 friend😊. Greetings from🇬🇷
Thanks for this. I watched another video where they took the wole front bumper/apron off, which I was dreading with all those fiddly clips. Just un-clipping and getting put back together, much better way to go.
Thank you my friend
You only have to do that if you want to take the windshield washer fluid tank out not for the pumps you only take out the wheel well cover.
Yiannis nice video almost has a Clint Eastwood spaghetti western vibe.
I changed mine today!!
This is very nice my friend. I'm very happy that you did it yourself. Merry christmas and happy new year my friend
My 04 Corolla seems to be a bit different. I tried doing it without taking the whole wheelwell cover off but I guess I'll haveto because I couldn't see the pump let alone take it out! Great guitar work too!
try removing the wheel cover to access the wash pump to replace it. The music is from RUclips library
Absolutely brilliant video. Wish me luck on Saturday. Joe
I wish you the best of luck my friend
Thanks Yiannis. That's was very helpful!
Thank you my friend
This video is both informative and relaxing!
I totally agree my dear.
@Corbin Benjamin ????
@Ahmir Martin ??????
Nice job! Very helpful. The only thing I did differently was to not take off the tire. Trying to save time because it's cold here today 😁.
I was hoping to unclip just enough of them to get my hands in there which worked for getting the old one out but I couldn't find a way to put enough pressure on it to get the new one in so I ended up taking out all of the screws and clips like you did. Even after that I couldn't get the new one in, but now with more room to work with I used a 4" C-clamp to put enough force on the new pump to get it properly seated. Working great now! Thanks!
I just hope you did not get sick and be well after that. Are you?
I bought a Corolla 2012 in Pakistan and My motor was not working , i send this to my Electrician he will Resolve this issue now thanks for making this Video Amazing Content !
That's why my friend you will be very careful in everything you buy.
@@YiannisPagonis thank you
Thank You. Great video really helped. I had no idea how to get to it.
I also had no idea exactly where they were until I discovered it while searching, as I discovered many other things. Conclusion: As you search you discover new things.
Yiannis thank you for this video. Well done.
You are welcome my friend
Excellent thankyou
You are welcome my friend
This is like the music from The Last of Us video game
Yes, I like this music. This music is somewhat nostalgic with strong emotions
Easier than changing a bulb light on BMW
I totally agree my friend.
Thank you for the video..its help me for that purpose.
You are welcome my friend and I'm glad about that
Very nice video. Well-made. Thank you.
I thank you very much my friend and may God always have you well and happy.
just as i thought..thank you sir
You are welcome my friend
Merci beaucoup.
Je vous en prie
Thanks, really needed this great video!
You are welcome my friend.
Excellent!!!
Thank you my friend 😀😀
It shouldn't be any different for an Auris from the same generation right ?
Thanks for the video, looks awesome !
I think yes it is my friend. Thank you sir.
Η ασφάλεια η το ρελε για το μοτερακι αυτό που βρίσκεται ;;
Στον χώρο του κινητήρα, στο κουτί με τις ασφάλειες, η οποία βρίσκεται στην δεξιά πλευρά (όπως βλέπεις το κινητήρα από έξω, από μπροστά)
@@YiannisPagonis σ ευχαριστω πολύ για τις άμεσες απαντήσεις σου όπως πάντα !!!θα με ενδιέφερε αν γνωρίζεις ποιο ρελε είναι μέσα στην ασφαλειοθηκη ..
@@giwrgosgiann278 Φίλε μου πρέπει να σου έδωσα λάθος απάντηση και συγνώμη για αυτό. Τώρα που βλέπω το βιβλιαράκι του αυτοκινήτου, αυτή η ασφάλεια βρίσκεται κάτω από τον πίνακα οργάνων και είναι η Νο 16 με χωρητικότητα 15 Αμπέρ (Windshield washer). Αλλά για απόλυτη σιγουριά θα το ελέγξω αύριο στο αυτοκίνητο μου και θα σου πω οκ; Έχουμε ακριβώς το ίδιο μοντέλο αυτοκινήτου;
@@YiannisPagonis εμενα είναι e12 hatchback 2004 μοντέλο με 4zz κινητήρα.θα το δω και θα σου πω ..δεν αντιδρά στο πάτημα είτε να πετάξει μπροστά είτε πίσω νερό ..πιθανών να τα χει παίξει το μοτερακι
@@giwrgosgiann278 Τα αυτοκίνητα μας είναι διαφορετικής γενιάς. Το δικό σου είναι 9ης γενιάς ενώ το δικό μου 10ης γενιάς, οπότε έχουμε διαφορές γενικότερα. Αλλά η θέση αυτής της ασφάλεια πρέπει να βρίσκεται κάτω από το ταμπλό. Όταν πατάς τον μοχλό των υαλοκαθαριστήρων ακούς κάποιον ήχο από την αντλία;
Nice video! Thanks!
You are welcome my👭👬👫 friend
2007 is different and to access it you'll need to remove the bumper cover
Oh my God! Jesus Christ! What a pity!
hello friend, that disconnected connector which is hanging in the background, what does it belong to?
Hello my sweet friend. Well this disconnected connector is for fog lamps
@@YiannisPagonis oh thank you my friend, but i have same connector on my car but only on the left side with the washer pump.. on the right side is none
Thanks
You are welcome my friend and have a new happy year full of love, health and happiness.
Thanx.very usefully. and mine car water also not so want to clean or change
நன்றி, என் நண்பர். உங்களுடைய சொந்த மொழியில் எனக்கு வேண்டும் என்று சொல்லுங்கள்
cheers, mate
Thank you, too
💯👍🏾
Thank you very much
Nice ❤
Thank you very much 🙏🙏
How about pointless annoying dialogue next time. I almost fell asleep to that music. Still a 👍 though.
Cool, think mine just went bad.
What is your problem my friend?
@@YiannisPagonis Well I live near Chicago and nothing is coming out of my sprayers. I dont hear any pump sound and the fluid is topped off and not leaking.
@@adriancampos2524 Make sure the washer nozzle jets are free. The problem could be that your windshield wiper nozzles are clogged. Listen to see if you can hear the washer pump running. The best way to do this is with the ignition on but the engine not running. That way it will be easier to hear. Get a helper. You’ll need someone to push or turn the knob while you listen. If you can hear the motor running, that’s great. If you still do not hear the washer pump working then check its fuse or the washer pump itself.
Jajajajjajaj western music and every thing
Yes i like it. Do you?
Hi, is there any difference between the placement of widshield washer pump in Toyota corolla e12 2002 1.6 vvti and Toyota corolla 2008? btw. great video, very infomative and clear. thx!
Yes, i think that it must be some differences between of them 2 models.
Ok, thx for your answer :)