Thank you for this video!! I replaced my crankshaft in my 2008 honda 420. I dont think i would of had the confidence to do this without this videos help. Again, thank you!!
It is so nice to watch people that KNOW what they are talking about. That's you guys! We have a saying here: Something that is understood, explains clearly and the word to say it come easily. Good job guys!
I hope this Honda 420 crankshaft video helped you out. That was the purpose. I'm going to try to upload videos as often as possible. Quick like And subscribe if you're into this type of stuff
this was very help full, our bolts were coming out on secondary clutch and cutting into the case, bent the bolts , we just replaced the bolts and used a little lock tight to keep this from happening agin
Nice video, I have a 2007 Rancher 420 with Electric Shift, 3rd gear is out in it and I'm also going to do the top end. Thanks this video will be very helpful...
Really great videos. It’s very interesting to see how these motors and tranny’s work. I love Honda ATVs. I love the sound of the. Honda engine and the smell of their exhaust. When hunting moose for a week they are a very reliable machine
thanks for the video you just saved my butt...my clutch plates were rattling around loose after a total rebuild as i didnt have that outer seated as you mentioned..machine wouldnt move in gear...thanks
loved the series, who is this man? better yet what is his mailing address, i totally need to send this man some beer, what a wonderful teacher, im sure just as great friend to have. thank you, one of the best tutorials and best instructors ive seen. thank you and i wish you guys and everyone and very happy and safe Christmas.
That motor sounds excellent. Great job. Wish you'd made a video of it running a while but all 4 videos are perfectly explained. How is it holding up? Thanks
Great. I could not find any videos when I was trying to do mine so i made one. It is running great still. I dont like the clutch kit we installed from Highlifters
I notice a step where your video varies from the manual , when installing the last friction disc on the shift clutch the manual states that it goes in the shallow slot not the long one as the other friction plates do. don,t know what this would do ????
I noticed that too I just got the clutch basket all together with all the disc's in the same slot. I'm going to take it back apart and put it the original way
Hola amigo,ya cambié los 2 tipos de clutches,pongo marcaha y no corre,cómo que si el clutch estuviera dañado,me pudieras orientar a algún otra falla,saludos desde México
So I got a question I don’t all that to my foreman pretty much identical same block couple little things different and it’s very hard to shift and when you shift up it still doesn’t disengage the clutch it just keeps pulling
any way you could specify which way the cyntrifical clutch is supposed to spin? my outter drum will spin counter clockwise and lock clockwise. I'm assuming one way bearing is in backwards. it will not idle in gear and it takes off as soon as started up
This is my third time rebuilding the 420 engine and for some reason this third time the clutch cover will not slide all the way on..? I know everything is in place I’ve checked multiples times rewatched this video but it is still getting caught on the clutches, anybody have this problem or have a suggestion? Great video btw
Quick question. I rebuilt the motor in a Honda rancher 420. I got it all back together. It started and ran but the reverse light pops between 2nd and 3rd. The neutral light pops between 3rd and 4th. Any help on why this happened
we have a 450 foreman, gear shift plate broke in half. we took off front cover removed clutchs replaced plate put everything back together. bike shifts now but when you give it the gas it doesn't move! what could we have done wrong or could there be something else broken????? 2002 Honda 450 foeman manuel shift.
Hi around 2:45 on the video aligning the shifter well i followed all the steps an my shifter is really tight but my transmission is free what could be happening?
I just got done rebuilding a 99 450 Foreman, which has a very similar engine. But now, when the transmission is in neutral, the output shaft spins...I don't think that should be the case. I had my uncle who used to work for Honda check it out and he's at a loss too, everything checked out. Any ideas? Thanks in advance.
i have to replace my front cover and only the front cover how hard would it be to do that would i have to take the hole motor off or could i do it with it on the four wheeler
You can remove the front cover in the bike. It's easier after the front driveshaft is out to stand it up on the back rack. Remove the fuel pump for more room.
Video wasn't very helpful to my problem because I need to know how to do the valve timing. I had to replace the piston rings on my 07 honda rancher 420, I got it all back together and now it has a knocking noise from the rods and I have no idea on how to get the timing right. If there is any way you can help me that would be great
If you only pulled the head and the jug, how on earth would your timing be off? Did you ingest water and bend a rod? As long as you didn’t pull the timing chain and cam, your timing should still be correct.
Thank you for this video!! I replaced my crankshaft in my 2008 honda 420. I dont think i would of had the confidence to do this without this videos help. Again, thank you!!
Thanks for this video! I was scared to tear into mine before watching this... heading to the garage now.
It is so nice to watch people that KNOW what they are talking about. That's you guys! We have a saying here: Something that is understood, explains clearly and the word to say it come easily. Good job guys!
Yea chris has been a honda mechanic for 30 years
I watched all your videos it was really worth the watch
I love the way he explains things.. hed make an awesome instructor
I hope this Honda 420 crankshaft video helped you out. That was the purpose. I'm going to try to upload videos as often as possible. Quick like And subscribe if you're into this type of stuff
Muy buen trabajo mi amigo, gracias por mostrarnos como se hace..
this was very help full, our bolts were coming out on secondary clutch and cutting into the case, bent the bolts , we just replaced the bolts and used a little lock tight to keep this from happening agin
Great. I could not find any videos when I was trying to do mine so i made one
Thanks for uploading this, just rebuilt a 500 foreman, couldnt find any videos related to what i was doing. Your video answered many questions i had.
yep very simular
I'm replacing a cam chain. Can I take the cam rollers out from the top of motor with pushrods
Nice video, I have a 2007 Rancher 420 with Electric Shift, 3rd gear is out in it and I'm also going to do the top end. Thanks this video will be very helpful...
did you get it fixed
Really great videos. It’s very interesting to see how these motors and tranny’s work. I love Honda ATVs. I love the sound of the. Honda engine and the smell of their exhaust. When hunting moose for a week they are a very reliable machine
The older dude has a voice like merle on walking dead😂👍
Very detailed rebuild! Honda dealership gotta hire you if not already!
Still good in 2022 lol thanks for the videos I’ve been in my motor before but never hurts to make sure everything is right 👍
thanks for the video you just saved my butt...my clutch plates were rattling around loose after a total rebuild as i didnt have that outer seated as you mentioned..machine wouldnt move in gear...thanks
loved the series, who is this man? better yet what is his mailing address, i totally need to send this man some beer, what a wonderful teacher, im sure just as great friend to have. thank you, one of the best tutorials and best instructors ive seen. thank you and i wish you guys and everyone and very happy and safe Christmas.
Great. I could not find any videos when I was trying to do mine so i made one
Great job thank you for your video and instructions excellent work
That motor sounds excellent. Great job. Wish you'd made a video of it running a while but all 4 videos are perfectly explained. How is it holding up? Thanks
Great. I could not find any videos when I was trying to do mine so i made one. It is running great still. I dont like the clutch kit we installed from Highlifters
Upon putting the clutch basket together , does the last fiber plate go into the smaller square tab or does it follow suit with all the others?
awesome videos,good job.needed to know how head broke apart just trying to redo rings on mine.lol
Sorry i wish we would have recorded that for you
Yes you can definitely do the front cover with the engine in the four wheeler
What was the main issue what part was bad that you replace
you guys did a phenomenal Im very impressed!!!
thanks
I notice a step where your video varies from the manual , when installing the last friction disc on the shift clutch the manual states that it goes in the shallow slot not the long one as the other friction plates do. don,t know what this would do ????
I noticed that too I just got the clutch basket all together with all the disc's in the same slot. I'm going to take it back apart and put it the original way
very clear and easy to understand thanks.
your welcome
Hola amigo,ya cambié los 2 tipos de clutches,pongo marcaha y no corre,cómo que si el clutch estuviera dañado,me pudieras orientar a algún otra falla,saludos desde México
So I got a question I don’t all that to my foreman pretty much identical same block couple little things different and it’s very hard to shift and when you shift up it still doesn’t disengage the clutch it just keeps pulling
Great video! Very well made.
Thanks! I think its the only one on youtube. I looked everywhere before I did my honda rancher and couldnt fine any helpfull vids so I me one.
any way you could specify which way the cyntrifical clutch is supposed to spin? my outter drum will spin counter clockwise and lock clockwise. I'm assuming one way bearing is in backwards. it will not idle in gear and it takes off as soon as started up
Very good vids !! When I put the front case on the clutch setting screw is all loose and the machine doesn't move ! Any ideas ?? Thanks
Can you take cam rollers out from top of motor with magnet?I'm replacing cam chain and I'm afraid of them falling in bottem end.so I heard
This is my third time rebuilding the 420 engine and for some reason this third time the clutch cover will not slide all the way on..? I know everything is in place I’ve checked multiples times rewatched this video but it is still getting caught on the clutches, anybody have this problem or have a suggestion? Great video btw
Quick question. I rebuilt the motor in a Honda rancher 420. I got it all back together. It started and ran but the reverse light pops between 2nd and 3rd. The neutral light pops between 3rd and 4th. Any help on why this happened
Buen video amigo un like for you
we have a 450 foreman, gear shift plate broke in half. we took off front cover removed clutchs replaced plate put everything back together. bike shifts now but when you give it the gas it doesn't move! what could we have done wrong or could there be something else broken????? 2002 Honda 450 foeman manuel shift.
Great video, you seem like u know what your doing. What do u think of these 420 engines are they good?
I think honda builds them as cheap as they can. They are not what they use to be
What are the torque specs for all the nuts on the front cover, clutch nuts etc?
Hi around 2:45 on the video aligning the shifter well i followed all the steps an my shifter is really tight but my transmission is free what could be happening?
Did you figure it out yet? if not i can ask my buddie
Aí sabe de mais!!!
great vid guys
thanks
Very helpful, thanks.
Whats the price of this type of rebuild ? I am thinking of purchasing a used Rancher
I just got done rebuilding a 99 450 Foreman, which has a very similar engine. But now, when the transmission is in neutral, the output shaft spins...I don't think that should be the case. I had my uncle who used to work for Honda check it out and he's at a loss too, everything checked out. Any ideas? Thanks in advance.
One way bearing is backwards
Hey u have any idea how to change the water pump
Have you figured out how to change the water pump on the Honda 420 yet?
yes this halps BUT a 2007 shifting is different
Good to know
i have to replace my front cover and only the front cover how hard would it be to do that would i have to take the hole motor off or could i do it with it on the four wheeler
I think you can do it in the bike
You can remove the front cover in the bike. It's easier after the front driveshaft is out to stand it up on the back rack. Remove the fuel pump for more room.
What's both clutches torque specs I have a 13 foreman 500
What year is your 500?
Can't go wrong following you mt8
great job
Video wasn't very helpful to my problem because I need to know how to do the valve timing. I had to replace the piston rings on my 07 honda rancher 420, I got it all back together and now it has a knocking noise from the rods and I have no idea on how to get the timing right. If there is any way you can help me that would be great
sorry, I will try to upload something about timming
If you only pulled the head and the jug, how on earth would your timing be off? Did you ingest water and bend a rod? As long as you didn’t pull the timing chain and cam, your timing should still be correct.
Olá tem esse vídeo em português
Why are there two clutches
if the one way bearing spins both ways? does it need to be replaced or can it be fixed?
idk I can ask my buddie
cool
Thanks
OH NO THEIRS NO OIL SHITT