FINALLY Adjusting my E Brake - What is Going on with my Steering Wheel!?

I finally fixed my e brake! Also having trouble with the cruise control buttons on my steering wheel and my horn isn't working...
Music:
Do it
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/f...
License code: JGIWZNB9NVTJLCJF
Sky high trinity
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/t...
License code: WTD6ZA0IIAVRYDDT
Hide Away
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/h...
License code: FGDL9UJNAFVAZYM5

[@okrizly3097]

Maybe sand down the ground wire in the steering wheel so there's a better connection?

[@pablomartinezromero2083]

Hi. I had a similar problem with the cruise control on my Z32. Sometimes it didnt work. In my case, I realized that it didnt work when I turned on the lights.
The problem began when I changed the rear bulbs to Leds, when I put the halogen bulbs back in, the problem disappeared, I dont know why. Same is your problem too.
In my case, I don,t know if the horn was damaged.

[@FarazXAhmed]

Yeah I knew about the brake lights causing that issue, but I kept the same bulbs from my old tail lights when I got the jspec and removed the LED brake bulbs. So unfortunately that’s not my issue 😩

[@colombianodny]

Can you post a link of where you get the steering wheel?

[@FarazXAhmed]

Interior Innovations! Check their website they have other items as well 👍

[@colombianodny]

@@FarazXAhmed got it, thanks!!

[@peterliang1294]

tried commenting several times and it keeps getting deleted????

[@peterliang1294]

Ebrake should be 6-7 clicks with 40lbs force pulling up. Your new steering wheel internal splines are slightly smaller than OEM causing the wheel to not seat properly and the contacts are not touching the clocking spring. I had the same issue with my interior Innovations wheel.

[@FarazXAhmed]

Look like your comment finally posted!
Is there a fix for that??

[@peterliang1294]

I took a die grinder and slightly opened up the tapered end with a fine grinding bit. Took a couple tries/steps but finally got it to sit further down.

[@FarazXAhmed]

I will try that! Thanks