Mine have corroded motherboard(?) sticked to the fan... too much mopping and leaking destroyed it. It turned on, worked for 1 minute with loud fan noices and poped up an error about fan, so I did this guide and it worked! Vacuum works quietly and no errors. Thanks!
Thank you so much for making this video! 👍👍👍👍👍😀 I fixed my mi robot vacuum mop essential by following your repair steps. I used super glue plus shrink tubing to prevent the fan from being misaligned again. I think it is a common issue since my other unit had the same problem.
Excelent video! Just finished doing the step by step on my mi vacuum and it worked perfectly! Only thing is that now I have a very loud vibration noise, I guess I'll disassemble again and use some glue on the fan case.
Thank you! It's a shame those units have such problem in the first place, especially when it's that common, but your solution worked perfectly. Just fixed my own device. The problem is indeed with the rotating part within the fan. It can move up and get stuck touching the plastic case above it. Pushing it down and fixing it there solves the issue.
Tengo ese mismo robot ya un 2 años mi problema es que no prende he desistalado la aplicacion 4 veces y no prende no se si es la batería ya que mi esposo nunca lo apagaba cuando terminaba de hacer el aseo y cargar. Será que me puedes dar un consejo gracias
Had the same problems and I fixed it. The thing is now I cant figure out how to reassemble the front bumper. It fell of while disassembling the robot..
You should assemble it and the rails for the bumper should match up and it will fit again. Its very tricky to assemble the bumper but you can get it without bending the metal bits
mine is with an error indicating filter cleaning, even with the filter clean, I believe it's the sensor, I disassembled and cleaned everything inside without success. does anyone know how to solve?
Mine have corroded motherboard(?) sticked to the fan... too much mopping and leaking destroyed it. It turned on, worked for 1 minute with loud fan noices and poped up an error about fan, so I did this guide and it worked! Vacuum works quietly and no errors. Thanks!
Thank you so much for making this video! 👍👍👍👍👍😀 I fixed my mi robot vacuum mop essential by following your repair steps. I used super glue plus shrink tubing to prevent the fan from being misaligned again. I think it is a common issue since my other unit had the same problem.
Excelent video! Just finished doing the step by step on my mi vacuum and it worked perfectly! Only thing is that now I have a very loud vibration noise, I guess I'll disassemble again and use some glue on the fan case.
Thank you! It's a shame those units have such problem in the first place, especially when it's that common, but your solution worked perfectly. Just fixed my own device. The problem is indeed with the rotating part within the fan. It can move up and get stuck touching the plastic case above it. Pushing it down and fixing it there solves the issue.
you are the man bro, thank you soo much ive fixed my issue becouse of you.
Thank you for sharing this video🙏. My G1 vacuum
is working again as good as new..😃👍👍👍👍👍👍👍Thank you again.
My mop fan speed not changing when changing modes to turbo, standard or silent. Any solution?
Thanks fixed the fan error 👍🏻👍🏻👍🏻
Tengo ese mismo robot ya un 2 años mi problema es que no prende he desistalado la aplicacion 4 veces y no prende no se si es la batería ya que mi esposo nunca lo apagaba cuando terminaba de hacer el aseo y cargar. Será que me puedes dar un consejo gracias
I didn't get what you did exactly with the fan. What was the problem? 😭
the fan moves a little bit inside the housing. So just gently push towards the bearing.
Why this vdo has no sound? Please help my G1 has the same error 😅
Hi my vacuum’s water pump is not working is there a dissembling or repair video for it?
Does anyone know where I can found the replacement fan?
Disassemble the fan assembly, the gently senão push down tô Lock the fan optional: apply adhesive top of the canto secure
Extremely helpful video!!
Hi how do i fix bumper functioning problem?
Thank you so much 😊
Hi do u do repair of the fan error? Let me know thanks
Muchas gracias ❤❤❤
It worked , god bless you
Had the same problems and I fixed it. The thing is now I cant figure out how to reassemble the front bumper. It fell of while disassembling the robot..
You should assemble it and the rails for the bumper should match up and it will fit again. Its very tricky to assemble the bumper but you can get it without bending the metal bits
@@zaimkarii1756 Thanks for the answer I eventually figured it out.
thanks for the help
Thank for sharing.. It really works.. 👍👍👍
Congratulations, you really help me hahaha
how to put front bumper back
muito obrigada!! funcionou aqui
Tamir yapiyormusunuz
it works! thanks a lot!
Thank you! It worked !!!!
I really rage with the battery being so hard to be disconnected.
nagrerepair ka ba sir?
I think the Xiaomi Shops inside SM repair them. I will bring mine there this week. Same problem, fan error.
Thank You!!!!!!!!!!
Hi my xioami 1g have a problem in brush error..even i already clean the brush it still suddenly stop working because of brush error..anyone can help?
passible maniboard problem
mine is with an error indicating filter cleaning, even with the filter clean, I believe it's the sensor, I disassembled and cleaned everything inside without success. does anyone know how to solve?