Me sr motoworld ka purana subscriber hu Maine is ladke ko bhut age se dekha he jab yeh naya tha log ulta sidha comments likhte he tu pehle school ja umar kya he teri matlab ghatiya me fan hu sr motoworld ka as a fan mujhe bura lagta tha inse mene engine knowledge ke bare thora bhut sikha big thank to him aj comments dekhte huwe yaad aa gayi purani baat kehte he na waqt sabkuch bata deta he nadi sab kuch yaad rakhta he god bless you sr motoworld
For heavier 650cc plus motorcycles, I've been told the break in period is to make sure driving hard causes shearing and torsional forces that can impact mounting points which is why first service checjs always include mounting point checks...I'd still take it easy for the first 1000 kilometers...
I recently bought KTM 390 Adventure X. I did not redline it yet but rode it normally the way anyone would. For the first 2 days the engine was heating a lot confirming friction between new engine parts but now the heating is normalised
@@karthikreddy8427 For break in, I did not cross 5k RPM at any gear. After the break in i changed the front sprocket from 15 teeth to 14 teeth due to low end torque issues
I didn't do any break in period for my dominar 400. The salesman actually told me not to worry about the break in period and just enjoy my bike as I want to. It's been 2 years and I haven't found any problem with my engine notlr with the piston.
I read somewhere in the yt comments that there was a time when riders would max out their new bikes because they believed that if they rode it slow in the beginning then the bike would remain slow for its life 😂😂
While rebuilding I believe a run-in is a must even if you use complete OEM parts. Old and new parts are getting mixed and in such case, one must follow a proper break-in.
SR Moto-World Team Must say all of your Bike videos are loaded with technical knowledge and experience. The details are extremely useful for most of the Riders. Rest all the comments says it all Just wanna say Never Quit Making Videos Of Bikes and Related technology
ride slowly or fastly its up to you but if you want more performance or atleast the performance that the bike is suppose to deliver you should atleast have to take for a topspeed run once or twice in run in period itself so that the engine will reach to its max potential or max load and withstand that load, dont just pamper your bike all the time.
@@appu9836 bhai tu kaise bhi chalao jhaant fatak nhi padtha engine ko, bus pehla 500 kms smoothly ride karo bus, uske baadh open your engine, push the limits.
Mujhe kab se intezar tha bhai apka video ka.... Anyway it's worth waiting your video....! Bhai ek suggestion hai ek mahine mein kam se kam ek aisa hi informative video toh jarur laya karo plz 🙏
I recently bought KTM Duke 390 Gen 3 and after 1500 KM engine started producing some noise and due to which my engine had to get opened. I did resist and asked for a new engine but as I was a normal customer with no social media reach, I couldn't get it. I just had one question is it ok if my engine got opened in the very start, my bike is running fine now but I have got the apprehension of it being faulty and all other stuff.
Sad to hear you had to get engine opened at such a early stage. How is the performance now after engine work. Do you feel any positive or negative difference??
A truly informative video about the technical knowledge of bikes. Kindly continue to make more such informative videos so that everyone can gain some knowledge regarding automobiles
Really great and nicely elaborated message, Thank you. I was really concerned about my vehicle coz I got it delivered last week , as I wanted to feel my vehicle's power I had to go for a outrageous RPM push but then I realised the instructions given to me was not to stress the engine for atleast 600 kms , after that I'm using it economically with maintaining constant RPM ... Will that affect my engine?? Please help me with the query.
Bhai baat to sahi hai bilkul. Maine nayi bike li thi 2015 mein aur khoob bhagaya usko. I used to get 25-30kmpl average and never understood why. Then uska engine khula 2019 mein and I followed the advice from the mechanic. Usko 500kms bade aaram se chalaya. Uske baad se I've been getting 50kmpl avg ab kaise bhi chalaun fir bhi
I did around 5 rides of approx. 100kms on new F250 in it's running period. On those rides, I took it to 120kph for a minute or so. But I didn't redline it completely. Max RPM was 7.5k But 60-80 was my cruising speed on those rides. User manual says max. 50kmph but I feel 50 for a 250cc motorcycle will rather harm than doing any good. You'll be lugging your motorcycle a lot. User manual also says to avoid riding at a single RPM for long durations and keep varying the RPM. Is my approach correct?
Thanks you sir ❤️😌😌😌😌 Maine 22/10/23 ko pulsar 150 twin disk Bike li showroom walo ne bola tha 50 ke upar mat chalana . Mere Dost ne 85+ chalayi 😢 muze Lag raha tha ki engine kharab ho Gaya hoga but Aapki video dekh kr me tention free ho gya 😌 Thanks you so much sir 🙏☺️
BROTHER MAINE PLATINA 110 3.1.2023 KO LI HAI 700 KM CHALI HAI. MINERAL OIL DAALU YA SYNTHETIC OIL. PAHLE BHI 110 RAKHI THI. USME BHI LIQUI MOLY HI USE KARTA THA. KYA ISME BHI FIRST SERVICE ME FULL SYNTHETIC OIL DAALU.
Thanks for this video. Maine Pulsar 150 bs6 8 mahine pehle li thi aur lete hi 950 km run ki thi wo bhi top speed par, man mai sambhram tha ki kya maine sahi kiya tha ya nahi.
I usually do heavy rev driving for 300 km and then i will change the engine oil(company recommended) and filter on my own and then after the completion of 1000 km i do company service and it was amazing i did this with my 3 motorcycles and it is perfect for me although u have to spend early on engine oil and filter but remember its worth it
What's the max speed for Honda Highness cb350 during running-in period? I'm doing 60KMPH max in 4th gear. Not trying 5th gear now before 1K odo. Is it alright?
Raiyaan, while I agree completely with your comments about the quality of machining, material and lubrication.. . I would argue that there is no harm in being nice with the bike for the first 1000 odd kilometers and let it clear out its rough edges. There isnt anything that can wrong with this approach, there are only potential benefits in staying within some reasonable rev limits. The break-in period can be substantially low compared to earlier days though. The engine heating in the initial period will be noticeable because of the friction which needs to wearout (that is what is break-in). Once that happens the heating will reduce substantially, from there on one can push the engine on high revs without possibly causing damage to the moving parts. After all we are putting our hard earned money on the machine and little patience is well worth it.
Bro, which to choose from below mentioned... 1. Apache 160 2V 2. Unicorn 160 3. Pulsar P150 4. FZ V4 What is real mileage of Apache RTR 160 2v? Some says below 40 some says 45-48...... plz tell me if you know bro
Maine new bike li and due to situation mujhe 90kmph + jana pada or tension me tha ki kahi engine problem na kare but apki video dekh ke tension kam ho gayi.
Ride it slow more but do hit high speed one or two times in your 500 to 1000 the engine also need to understand its potential. Not everytime tho if you take care of it too much it will not give you maximum potential of it.
But I am still in doubt that mechanics in authorised service center also not doing work as per the company guidelines, I saw in hero , they are just like local mechanic only few equipments they have extra for normal service other wise for any serious engine issue , they open it just like local mechanic fix it on floor with all the parts nuts spreaded here and there and even floor is also not cleaned
Finally found a motorcycle enthusiast channel who is actually has technical knowledge about these important things
True
Fortnine in Hindi
Me sr motoworld ka purana subscriber hu Maine is ladke ko bhut age se dekha he jab yeh naya tha log ulta sidha comments likhte he tu pehle school ja umar kya he teri matlab ghatiya me fan hu sr motoworld ka as a fan mujhe bura lagta tha inse mene engine knowledge ke bare thora bhut sikha big thank to him aj comments dekhte huwe yaad aa gayi purani baat kehte he na waqt sabkuch bata deta he nadi sab kuch yaad rakhta he god bless you sr motoworld
SRM' S ENCYCLOPEDIA 👌👌
Your informative channel will make even the common man an automobile engineer..
Keep it up..Your signature style videos..
main mudda starts from 5:25
Thanks saurabh 😘😘😘😘😘😘😘😘😘
Thanks Bhai 😂
Oh ok😂
Kash Mai ye Video Phele Dekh Leta To SHi Rheta
Thanks
For heavier 650cc plus motorcycles, I've been told the break in period is to make sure driving hard causes shearing and torsional forces that can impact mounting points which is why first service checjs always include mounting point checks...I'd still take it easy for the first 1000 kilometers...
I recently bought KTM 390 Adventure X. I did not redline it yet but rode it normally the way anyone would. For the first 2 days the engine was heating a lot confirming friction between new engine parts but now the heating is normalised
Hello bro
I recently bought one, please let me know what speeds at what gears did you maintain during the break in
I bought scrambler 400x and there were vibrations post 6000 and also heating a lot now heating almost non existent and nor vibration around 6500 rpm
@@karthikreddy8427 For break in, I did not cross 5k RPM at any gear. After the break in i changed the front sprocket from 15 teeth to 14 teeth due to low end torque issues
I Brought kawa Sex H2 🎉🎉
Heating is normal in new bikes so dont worry ride in safe speed❤
When I purchased my bike, he did not mention anything about Engine Break in, etc.... Only said that, get it serviced before 500 or 600 KMs
Bike showroom se nikal te hi 100 daba diya🤣
Showroom se nikal te hi 100 dabaya😂
I didn't do any break in period for my dominar 400. The salesman actually told me not to worry about the break in period and just enjoy my bike as I want to. It's been 2 years and I haven't found any problem with my engine notlr with the piston.
I read somewhere in the yt comments that there was a time when riders would max out their new bikes because they believed that if they rode it slow in the beginning then the bike would remain slow for its life 😂😂
Thanks for this
@@nuclear9977 wtf😂
😂😂@@nuclear9977
While rebuilding I believe a run-in is a must even if you use complete OEM parts. Old and new parts are getting mixed and in such case, one must follow a proper break-in.
very precise and clear cut information about the current scenarios of engine's lots of love to you brother.
Bhaiya jaldi jaldi video laya karo... love you from West Bengal 💓🎉
Video thik time pe aa rhi hy dost 1day me videoshoot or editing nhi ho pati smjho plz🥰
U are not content creator that's why u don't understand how much time it takes to 1 good video. U are just a consumer who have infinite wants .
Ok Bhai will take care NXT time
SR Moto-World Team
Must say all of your Bike videos are loaded with technical knowledge and experience.
The details are extremely useful for most of the Riders.
Rest all the comments says it all
Just wanna say
Never Quit Making Videos Of Bikes and Related technology
Thanks alot man keep supporting
🎉🎉🎉
Bhai tension me tha. Jab suna ki bhopal se Goa top speed pe gaye ho to sukun mila😂
ride slowly or fastly its up to you but if you want more performance or atleast the performance that the bike is suppose to deliver you should atleast have to take for a topspeed run once or twice in run in period itself so that the engine will reach to its max potential or max load and withstand that load, dont just pamper your bike all the time.
well said
💯
Bhai mere pas N250 hai 1600 chali hai
Kya mujhe top speed pe lena cahiye usko performance me improvement lane ke liye ?
@@appu9836 bhai tu kaise bhi chalao jhaant fatak nhi padtha engine ko, bus pehla 500 kms smoothly ride karo bus, uske baadh open your engine, push the limits.
Even I did this to my new F250. I have pushed it 4 to 5 times for 1-2 minutes in the initial 1200kms of purchase.
Mujhe kab se intezar tha bhai apka video ka.... Anyway it's worth waiting your video....!
Bhai ek suggestion hai ek mahine mein kam se kam ek aisa hi informative video toh jarur laya karo plz 🙏
Bring More informative videos like this bro ♥️
Bhai I love your channel and the way you talk. Bhopal ki zubaan is truly very gentle and beautiful. Thank you for sharing your knowledge. Best wishes!
Ek podcast start krdo bhai regarding motor vehicles 👍🏽👍🏽😍😍
It's gonna be awesome 😊
Nice information,
Explain good but little faster...😜
nicely explained i know all this but dont know proper words to explain it
Video start from 3:38
This video was very much needed bro ☺
😀👍 s r 👍 genuine person bahoot ache say explain kartay ho
I recently bought KTM Duke 390 Gen 3 and after 1500 KM engine started producing some noise and due to which my engine had to get opened. I did resist and asked for a new engine but as I was a normal customer with no social media reach, I couldn't get it. I just had one question is it ok if my engine got opened in the very start, my bike is running fine now but I have got the apprehension of it being faulty and all other stuff.
Im getting my duke tommorow.. How much speed to ride before 1st service bro..?
Sad to hear you had to get engine opened at such a early stage. How is the performance now after engine work. Do you feel any positive or negative difference??
A truly informative video about the technical knowledge of bikes. Kindly continue to make more such informative videos so that everyone can gain some knowledge regarding automobiles
Aap aise hi technical videos upload lijiye bhai
MASHA ALLAH aap k samjhane ka tariqa or andaaz bahut behtar hai
slow down bro... i was checking my settings😅😆 feels like watching in 2x speed
maine bhi turant check kiya tha😀😀😂
nicely explained
keep it up man
Very informative video. Keep it up bro.👍👍👍
Really great and nicely elaborated message, Thank you.
I was really concerned about my vehicle coz I got it delivered last week , as I wanted to feel my vehicle's power I had to go for a outrageous RPM push but then I realised the instructions given to me was not to stress the engine for atleast 600 kms , after that I'm using it economically with maintaining constant RPM ... Will that affect my engine?? Please help me with the query.
Bhai baat to sahi hai bilkul. Maine nayi bike li thi 2015 mein aur khoob bhagaya usko. I used to get 25-30kmpl average and never understood why. Then uska engine khula 2019 mein and I followed the advice from the mechanic. Usko 500kms bade aaram se chalaya. Uske baad se I've been getting 50kmpl avg ab kaise bhi chalaun fir bhi
Which bike you have
@@BashuRaj-yb2pi pulsar 150
Please make video on honda cb300f
Love your explanation bro
Bro.. please make some videos on common problems comes in bike so in break down situation new riders can manage and reach to garage or mechanic..
Nice content idea, I’ll make a video on it
Bhai mene apni gt 650 dushre din hi 160 baga di thi 😅😅
😂😂
Bhai same 😂
😮
6:31 TVS piche hai inme😅
Good information thank you...
Thank You for this wonderful n informative video.. learnt quite a lot of things.
Big brother 😀 apka Bike ka reviews bohot achha lagta hei 😁 Mei like karta hoon👍. Apko Instagram pe Follow bhi karta hoon 😎. 👍👍
बहुत खूब Bhai 😀😀
Bhot aage badoooge aap bhai knowlege bhot high hai apki
I did around 5 rides of approx. 100kms on new F250 in it's running period. On those rides, I took it to 120kph for a minute or so. But I didn't redline it completely. Max RPM was 7.5k But 60-80 was my cruising speed on those rides. User manual says max. 50kmph but I feel 50 for a 250cc motorcycle will rather harm than doing any good. You'll be lugging your motorcycle a lot. User manual also says to avoid riding at a single RPM for long durations and keep varying the RPM. Is my approach correct?
ruclips.net/video/xpoglovyy_8/видео.htmlsi=YDW0c7UxCdVroWIT
Can you suggest a engine oil for my r15 v4 because I m getting overheating problem in my Yamaha typical engine oil
Motul synthetic
@@srmotoworld Brother please aap 1 time meri bike ka user review kar do me bhopal me rehta hu meri bike Yamaha ki hai
Love from bhopal ❤️❤️
During first service of new bike...engine flush out is beneficial ?
Not imp
Thanks you sir ❤️😌😌😌😌
Maine 22/10/23 ko pulsar 150 twin disk Bike li showroom walo ne bola tha 50 ke upar mat chalana . Mere Dost ne 85+ chalayi 😢 muze Lag raha tha ki engine kharab ho Gaya hoga but Aapki video dekh kr me tention free ho gya 😌
Thanks you so much sir 🙏☺️
Man of lots knowledge ❤
Bhai r 15 v 4 main second din 105 pe bhaga diye bohot dar lag raha tha ki kuch hoga ki nahi thanku bhai sara dar khatam ho gaya 😊
BROTHER MAINE PLATINA 110 3.1.2023 KO LI HAI 700 KM CHALI HAI. MINERAL OIL DAALU YA SYNTHETIC OIL. PAHLE BHI 110 RAKHI THI. USME BHI LIQUI MOLY HI USE KARTA THA. KYA ISME BHI FIRST SERVICE ME FULL SYNTHETIC OIL DAALU.
Boht accha video Rayyan bhaiya
Too much repetition
Exactly
Boring even dude
But it is clearly mentioned in manual that you must follow run in period.
We purchased Apache 3 months ago.
Pulsar n160 pr fir se video banyee
Wah kya thumbnail hai bro
The best informative video
No need to wait for break in period. The manufacturer already rev the engine out while testing
Nicely explane sir
Love and support from odisha
Thanks for this video.
Maine Pulsar 150 bs6 8 mahine pehle li thi aur lete hi 950 km run ki thi wo bhi top speed par, man mai sambhram tha ki kya maine sahi kiya tha ya nahi.
Loved the explanation ❤
Bhaiya ye video fir se eak baar bana dijiye fi engine ko bhi explain kr dijiye ga ❤
Even for brand new tyres as well there is breakin period to remove the shiny coat.
I usually do heavy rev driving for 300 km and then i will change the engine oil(company recommended) and filter on my own and then after the completion of 1000 km i do company service and it was amazing i did this with my 3 motorcycles and it is perfect for me although u have to spend early on engine oil and filter but remember its worth it
What happens if the engine does fail within the 1000kms?
Do they replace the whole engine?
yes they would replace or fix it by warrenty
Bro Kya Choti New Commuter bikes like shine etc. ko b redline ya high speed pe chala sakte hai..?
My friends Honda shine one year old gives 40 kmpl cause he is not follow run in period.
Thank you for sharing this useful information in detail. Cheers!
Thank you so much for the informative video👍
Nice review 👍👍👍👌👌👌
Excellent explanation bhai honda hornet 160r ke liye best engine oil suggest kr do bhai
फिर भी 30 साल पुराणी बाईक चार आज भी चलाने लायक है जो आज के आधुनिक 12 साल के बाद बदलना जरुरी हो जात है
Interesting video bro 💯🏍️
Good video. But pls do not repeat same info for 2-3 times again & again, which will increase video length unnecessarily... 👍👍
thanks for information
What's the max speed for Honda Highness cb350 during running-in period?
I'm doing 60KMPH max in 4th gear. Not trying 5th gear now before 1K odo. Is it alright?
Use all the gears in ur bike if u don't use ur gear for a longer period it might slip when u put it in 5 gear so try to use all the gear
Platina abs pe v banao aur sath me compare v kar dena koi v 110 k sath
Bajaj pulsar p150 vs Bajaj pulsar ns 160 konsa bahetor ha ak review, please 🙏🙏🙏
Nice and very informative
Raiyaan, while I agree completely with your comments about the quality of machining, material and lubrication.. . I would argue that there is no harm in being nice with the bike for the first 1000 odd kilometers and let it clear out its rough edges. There isnt anything that can wrong with this approach, there are only potential benefits in staying within some reasonable rev limits. The break-in period can be substantially low compared to earlier days though. The engine heating in the initial period will be noticeable because of the friction which needs to wearout (that is what is break-in). Once that happens the heating will reduce substantially, from there on one can push the engine on high revs without possibly causing damage to the moving parts. After all we are putting our hard earned money on the machine and little patience is well worth it.
Bhai bhot help kari hai is video ne
Love your videos but, you should smile a little more😁😀
This is to be followed for Scooty also right?
Top tier info 🔥
Hum jab bhi gaadi lete hai tab gaadi ko naye mai bahut sambhalte hai iski vajah se last tak gaadi saath deti hai
Very intellectual....i realy like ti liste to u thanks brother
Bro, which to choose from below mentioned...
1. Apache 160 2V
2. Unicorn 160
3. Pulsar P150
4. FZ V4
What is real mileage of Apache RTR 160 2v? Some says below 40 some says 45-48...... plz tell me if you know bro
For Power Apache
And For Refinement V4
But I Prefer N160 Or Apache 160 4v
2v Give 45+ Mileage If You Ride It On Eco Speed 60 Approx
Maine new bike li and due to situation mujhe 90kmph + jana pada or tension me tha ki kahi engine problem na kare but apki video dekh ke tension kam ho gayi.
Bro make a video explanation on clear clutch case whether it is good or bad for bikes...
superb video
My Honda aviator 3 saal purani hai 39,771 km chal chuki hai isme new block piston wagera lagai hai to kya mujhe bhi ye rules follow karni chahiye
Fir bhi maine 1000+ km 5000rpm k niche hi chalayi 👍🏼
Rpm kya hota hai
TVS apache 160 4v 2023 or Xtreme 160 comparison
Both have vibrator as engine
Ride it slow more but do hit high speed one or two times in your 500 to 1000 the engine also need to understand its potential. Not everytime tho if you take care of it too much it will not give you maximum potential of it.
High speed matlab... pura max speed me leke Jana chiye ya normally thora jyada speed se chlana chiye?👀...reply plz
Apka Matlab agar Mera dost Meri new bike test ride Karne maghe toh dedun? 🤣
Bhai clutch plate kyu khrab hoti he is topic pr video banao
I love your video but please reply my question
Plz answer splendor xtec Leni hai kaisi rahegi.
I needed to know this
Can you suggest n160 engine oil. Bajaj Jo oil suggest korte he ho engine oil costli he.
But I am still in doubt that mechanics in authorised service center also not doing work as per the company guidelines, I saw in hero , they are just like local mechanic only few equipments they have extra for normal service other wise for any serious engine issue , they open it just like local mechanic fix it on floor with all the parts nuts spreaded here and there and even floor is also not cleaned
Bava ek video abs system per bnao konsa behtar hota h or kyu
Does all company track vehicle location and speed riding every seconds like ev.
I am asking only for petrol and diesel vehicles
Most informative chanel
Is the scooters like Jupiter from Indian brands like TVS don't need the break-in?