Bernina 830 Record Basic Lubrication / Bernina Oiling Diagram / Bernina 830 / Bernina 831
HTML-код
- Опубликовано: 6 сен 2024
- 𝐁𝐞𝐫𝐧𝐢𝐧𝐚 𝐒𝐞𝐰𝐢𝐧𝐠 𝐌𝐚𝐜𝐡𝐢𝐧𝐞 𝐒𝐞𝐫𝐯𝐢𝐜𝐞, 𝐀𝐝𝐣𝐮𝐬𝐭𝐦𝐞𝐧𝐭 & 𝐒𝐞𝐭𝐭𝐢𝐧𝐠𝐬, 𝐁𝐞𝐫𝐧𝐢𝐧𝐚 𝐂𝐚𝐭𝐚𝐥𝐨𝐠 𝐏𝐚𝐫𝐭𝐬, 𝐁𝐞𝐫𝐧𝐢𝐧𝐚 𝐏𝐚𝐫𝐭𝐬 𝐃𝐢𝐚𝐠𝐫𝐚𝐦; 𝐁𝐮𝐲 𝐚 𝐩𝐝𝐟 𝐜𝐨𝐩𝐲 𝐚𝐭 𝐚 𝐟𝐚𝐯𝐨𝐫𝐚𝐛𝐥𝐲 𝐩𝐫𝐢𝐜𝐞; Bernina repair manual:
www.masinskiku...
.
.
This video shows basic lubrication for Bernina 830 Record and Bernina 831. There are still positions where it is very useful to lubricate, my recording equipment is very modest and it is hard for me to record it all.
.
𝐍𝐎𝐓𝐄: 𝐒𝐞𝐯𝐞𝐫𝐚𝐥 𝐜𝐨𝐦𝐦𝐞𝐧𝐭𝐬 𝐫𝐚𝐢𝐬𝐞 𝐭𝐡𝐞 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧 𝐨𝐟 𝐭𝐡𝐞 𝐮𝐬𝐞 𝐨𝐟 𝐥𝐮𝐛𝐫𝐢𝐜𝐚𝐭𝐢𝐧𝐠 𝐠𝐫𝐞𝐚𝐬𝐞. ?!? 𝐈 𝐝𝐨 𝐧𝐨𝐭 𝐫𝐞𝐚𝐝 𝐭𝐡𝐞 𝐢𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧𝐬 𝐟𝐨𝐫 𝐮𝐬𝐞, 𝐈 𝐝𝐨 𝐧𝐨𝐭 𝐧𝐞𝐞𝐝 𝐢𝐭, 𝐢𝐭 𝐢𝐬 𝐩𝐨𝐬𝐬𝐢𝐛𝐥𝐞 𝐭𝐡𝐚𝐭 𝐭𝐡𝐞 𝐢𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧𝐬 𝐝𝐨 𝐧𝐨𝐭 𝐬𝐚𝐲 𝐭𝐡𝐚𝐭 𝐠𝐫𝐞𝐚𝐬𝐞 𝐢𝐬 𝐮𝐬𝐞𝐝 𝐭𝐨 𝐥𝐮𝐛𝐫𝐢𝐜𝐚𝐭𝐞 𝐭𝐡𝐞 𝐩𝐚𝐫𝐭𝐬 𝐨𝐟 𝐭𝐡𝐞 𝐬𝐞𝐰𝐢𝐧𝐠 𝐦𝐚𝐜𝐡𝐢𝐧𝐞, 𝐈 𝐮𝐬𝐞 𝐢𝐭, 𝐢𝐟 𝐲𝐨𝐮 𝐭𝐡𝐢𝐧𝐤 𝐨𝐫 𝐡𝐚𝐯𝐞 𝐢𝐧𝐟𝐨𝐫𝐦𝐚𝐭𝐢𝐨𝐧 𝐭𝐡𝐚𝐭 𝐢𝐭 𝐢𝐬 𝐢𝐧𝐜𝐨𝐫𝐫𝐞𝐜𝐭, 𝐲𝐨𝐮 𝐝𝐨 𝐧𝐨𝐭 𝐡𝐚𝐯𝐞 𝐭𝐨 𝐮𝐬𝐞 𝐠𝐫𝐞𝐚𝐬𝐞..! 𝐈𝐭 𝐢𝐬 𝐧𝐨𝐭 𝐧𝐞𝐜𝐞𝐬𝐬𝐚𝐫𝐲 𝐭𝐨 𝐮𝐬𝐞 𝐨𝐢𝐧𝐭𝐦𝐞𝐧𝐭, 𝐲𝐨𝐮 𝐜𝐚𝐧 𝐮𝐬𝐞 𝐨𝐧𝐥𝐲 𝐨𝐢𝐥.!
I received information that the instructions say that certain models of home sewing machines are never lubricated, which is nonsense to me.
Nice regards to everyone 🙂
.
Bernina Sewing Machine Service, Adjustment, Settings, Bernina Catalog Parts:
www.masinskiku...
.
Bernina 830 Record Lubrication: • Bernina 830 Record Bas...
.
Bernina 530 Record: • Bernina 530 Record / ...
.
Bernina 830 Record: • Vintage Bernina 830 Re...
.
Bernina Presser Foot: • How To Use An Overcast...
.
Bernina 807 Minimatic: • Sewing Machine Bernina...
.
Vintage Bernina Threading: • How to Thread a Bobbin...
.
Bernina Foot Control: • BERNINA SPEED CONTROL ...
.
Bernina 802 Matic: • Bernina 802 Matic Ele...
.
Vintage Bernina 125: • BERNINA 125 / Bernina ...
.
Bernina 730 Record: • Bernina 730 Record Dem...
.
Bernina User Manuals: www.masinskiku...
.
@MasinskiKutak
𝐍𝐄𝐖 𝐕𝐈𝐃𝐄𝐎 Bernina 830 Record Oiling:
ruclips.net/video/ot9pOVpYdNU/видео.htmlsi=vzgosB-9kZ5Vf0OK
Thank you for this Video. I got this machine from my mother who can no longer sew. It was used many years and sounded a bit "dry". With your instructions I opened the machine and was able to make it run smoothly again. My mother and I would like to thank you very much for keeping these old and trusty machines alive.
Thank you for following us and sharing our videos. I love old sewing machines and my favorite brand is Bernina.
Best regards to you and your mother.
My old Bernina 830 Record Electronic all of a sudden refused sewing zig zag but thanks to you I managed to fix it on my own by removing quite a lot of lint and adding some oil at certain critical points! I will be forever grateful for your video ❤
Thank you for watching us and for sharing our videos, it's nice to have a Bernina service manual as well:
www.masinskikutak.com/2021/09/bernina-service-and-adjustment-vintage.html
It sure is! Thanks again! 😊
I cannot begin to thank you enough for this tutorial. I couldn't get any of my stitches to perform and after using this tutorial, everything works like it just came back from the shop. I don't know who you are, but you are truly my hero!!
Thank you
I am an ordinary man who knows sewing machines well, I live in Bosnia. And I am happy to be able to share some of my knowledge around the world. Best regards .
@@MasinskiKutak Holaaa feliz y bendecido día. Estoy apasionada con ver videos de máquinas, aunque no cuento con ninguna. Pero tengo una amiga que le regalaron una Hernia 801 pero está trancada y muy oxidada. Podrá darme recomendación? Somos de Venezuela, agradecida de antemano.
@@martizsuarez4599 Hernia 801, no se que maquina de coser es??
primero quite todo lo que pueda y esté permitido de la máquina, cubiertas y similares, puedo recomendar un poco de spray anticorrosivo, rocíe en todas las superficies deslizantes, cojinetes y mueva lentamente la máquina con la mano, sin fuerza fuerte, muévase hacia adelante y hacia atrás, rocíe nuevamente en rodamientos, un poco de persistencia y creo que la máquina funcionará. Si logra poner en marcha la máquina, no necesariamente significa que va a poder coser, poner en marcha está a mitad de camino de la meta, Saludos para Venezuela...
Thanks a lot! I found a Record 830 Bernina that had stood in a garage for years. Totally dirty and stuck. But with the help of your video I could make it work again. Now it's purring like a cat and sews and sews and sews... THANKS!!!
Bernina 830 Record is a good sewing machine.
Thank you for following our channel and sharing our videos.
We have about 24 of these at our school and I needed to brush up my maintenance skills on vintage machines for my classes!
Yes, it was a big challenge for you.? 🙂
LOVE the intro "music". I used to sit by Nana's treadle machine for hours and watch her sew.
Thank you so much. I was trying to make masks during the COVID-19 lockdown and my old Bernina ground to a halt. Your video helped me get it back purring like a cat. It was so dirty and dry. This was such a help.
Easy to follow. Thanks.
Face mask pattern 😷
ruclips.net/video/jDBPfyyLatc/видео.html
Awesome tutorial on oiling Bernina sewing machine 👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽
I just used this to oil my Bernina for the first time and it has worked a treat! Thanks. I have the same machine.
Great, your Bernina will work much better
thank you a thousand times you helped me so much😁😅
I recommend watching the new and even better video:
ruclips.net/video/ot9pOVpYdNU/видео.html
@@MasinskiKutak thanks😀
The nylon gears should never be greased, petroleum based grease can degrade the gear material, the same applies to any machine with nylon / composite gears.
You have the right to your opinion, I think the opposite,
I disagree with your opinion.
As one who has serviced LOTS of sm's, over many years, I agree with Keith Hallgren as I also do not use petroleum based grease on these types of gears, only metal ones found on our vintage sm's.
Never use grease on these gears unless you want to damage the gear
@@Midlothian55
A small amount of fat cannot be harmful, it is my long experience. The theory that the grease will destroy the gear has no basis. Bernina 830 is an old sewing machine and gear and grease production technology has changed a lot.
In any case, we will do what we think is right.
I will not discuss this topic again, of course, I leave the possibility of comment...
You were the most helpful.
Thank you.
Thank you for watching and sharing our videos
Thank you so much from the U.S. 💖
Thank you for sharing our videos
ruclips.net/video/c9q5BbkiRRc/видео.html
Nice video. I'm never sure if I've missed a few points with oiling. Would you tell us where you get the grease and what kind, please. (BTW, the music is annoying.)
As for grease, there were a lot of similar questions, read the note below the video as well as a few comments,
music, you have the option to reduce or exclude. Thank you 🙂
I thought the music made your video cool
Newer video clips don't have background music, what can I do, I repeat the same thing, I'm not a film director, I'm an expert in sewing machines.
Thank You very much for the vidio. I have an 801 that I don’t seem to be able to open the top cover on. I would be grateful for suggestions.
There are two variants, a cover with two screws that are clearly visible from the top and another variant is to open the top cover using the switch on the side, open the cover where the bulb is placed, in the upper left corner you will see a "button", press it and open top cover.
@@MasinskiKutak Thanks, I got mine to open!
My machine like this one has one problem spool wider not working properly. When I turn the wheel to disengage needle sewing, the needing stitches while winding spool. Checked by lifting top lid. It’s running ok till I slide knob over for spool winding.then not. Any suggestions please very much appreciated.
It is necessary to remove the handwheel, clean the sliding surfaces and lightly lubricate them.
Bernina service manuals:
www.masinskikutak.com/2021/09/bernina-service-and-adjustment-vintage.html
Thank you!
Thank you so much for this video. I rediscovered my old bernina 830 a few weeks ago in the loft. The last time I tried it out was about 20 years ago. At that time the capacitor blew, and I had no idea what had happened and was frightened to look. Now I'm older and wiser, so I opened it up last week, discovered the broken capacitor, was lucky enough to track down a replacement, and fitted it myself. The motor is now purring away like a kitten. However, the needle wasn't going up and down, so today I followed your helpful oiling instructions. It appeared to have loosened things up, and I was able to turn the needle manually. However, it's now stuck again. Although the motor is working the power doesn't seem to be transferring power to the sewing mechanism. Could it be a loose drive belt? Do you have any ideas. I know I could take the machine in for repair, but I feel as though I've done so much myself already that it could be something I could attempt myself. I'm pretty brave (and a cheapskate!) Any suggestions would be most welcome. Thank you.
Remove the side cover and inspect the condition of the belts.
How the machine behaves when winding the lower thread, whether the motor runs smoothly and whether the flywheel lock is correct..?
Unscrew the flywheel lock, hold the flywheel lightly with your hand, start the machine, if the belts are loose, they will slip.
Bernina 830 Record Service :
ruclips.net/video/C7VWRw2D_h8/видео.html
@@MasinskiKutak thank you for your very quick reply. I'll give it a try.
Very helpful!
Thank you
Bernina 830 Record Service Buttons Panel: ruclips.net/video/c9q5BbkiRRc/видео.html
Thank you 🙏
Bernina 830 Record service manual: ruclips.net/video/C7VWRw2D_h8/видео.html
Hey, Great video, Ok I am going do follow you step by step, but first it looked liked you use 3 different oil/grease. What kind of grease and oil and where can I buy it (ideally withe the same dispensers you used. Thanks a Million, Steve
I use one type of oil, which is oil to lubricate sewing machines.
Grease is plain from the workshop,
for lubricating bearings without heating. Read the details of the video clip. Regards
Not sure about the oil recommendations, why did you mean. Should it be white mineral oil or 100 percent synthetic? Grease, is there a brand name you can provide? Thanks
@@stevarino1675
I am absolutely sure 🙂
the problem is that my English is very bad, I often use google translator, misunderstandings are possible.
Sewing machine lubricating oil cannot be mineral, when you buy sewing machine lubricating oil it must be 100% synthetic and without the presence of acids. I can't recommend a brand for ointment, I just don't know, ointment is not necessary, you can only use oil.
Thank you very much...most appreciated, and I think your English is perfectly fine.
What kind of grease do you use please? A big thumbs up to oil my machine. Its now back to its purrfect self. Thank you
We have already discussed the use of lubricating grease on Bernina 830, namely some are of the opinion that the grease should not be used on nylon gears, I use the one at hand and you if you want I recommend pure synthetic grease or just a oil.
Merci pour tout ces renseignements, comment réparer le bouton aller retour qui règle les points.problème sa bloque vers le haut
ruclips.net/video/C7VWRw2D_h8/видео.html
Thank you for this tutorial. My Bernina 807 minimatic has a slightly problem, the needle stand button is stuck, and cannot move left and right. Could you tell if I can fix it myself? I am from Holland, therefore this 🌷 for you.
It can be fixed, it's not a big breakdown, maybe someone used to lubricate it with inadequate oil, the old grease may dry out which blocks the needle from moving left to right. If your sewing machine sews zigzag quite normally then there is a problem with the button to move the needle. Warming up the jammed mechanism can give a good result, remove the top cover and heat the mechanism from the inside, behind the button to move the needle, you can use a hair dryer for heating, feel free to try.... Thank you so much for the flowers and best regards to you in the Netherlands. 🙂
Bernina 807 minimatis: ruclips.net/video/oXKnA-SIq7Y/видео.html
السلام عليكم شكرا لك انا من الجزائر عندي نفس الماكينة رائعة
احكيلنا شوية عليها راهي دير تلاثة ملاين هي خير من الجدد ارجو الرد
Thanks for the thorough and excellent video as I've just bought the same machine on ebay though Still looking to buy another one! Btw what's the best oil to use? thanks :-)
Buy adequate lubricating oil for sewing machines.
How to lubricate the sewing machine:
www.masinskikutak.com/2012/03/osnovno-odrzavanje-masina.html
Please help, the Bernina 807 side cover... Rubber and springs?
I do not currently sell sewing machine parts.
Bernina 807: ruclips.net/video/Jw-PdDBZJm8/видео.html
Thank you, so much for this video. It was very helpful.
I really appreciate your videos. This is going to be a silly question, but I was just gifted this machine and got it back from the shop and haven't used it... I plug it in and it's automatically on, but it's there an actual on/off switch?
Bernina 830 Record does not have a main power switch, you have a problem with foot control: ruclips.net/video/SyJ2IgqFGbQ/видео.html
.
Bernina 830 Record Foot Control : www.masinskikutak.com/2014/10/bernina-kontrolna-papucica.html
Hi I was wondering whether you could give any advice. Under the bed, where you oiled the back bar really well, my Bernina that I bought second hand, this bar is not moving at all. Do you know how I can get it to move again?
@Laura Liddell
I'm not sure which bar, in any case, it was due to the long standing without lubrication. Do you notice any drawback, does the feed dog work,?
Is the oscillating hook triggered,?...
Is this the oil / grease service that a professional repair person would do? My Bernina 830 manual shows only four oiling places and no grease places.
Some manuals say that lubrication is not necessary,
i am an expert on sewing machines and i don't read manuals.
@@MasinskiKutak Thank you! It does make sense that moving machine parts would need grease. Your machine looked great.
@@ArlenePMCM
Yes, it was an extraordinary machine, great condition, I occasionally buy it from the diaspora living in Western Europe. I sold it, I'm currently using this Bernina 930 Record: ruclips.net/video/bdXp5UA9B3Y/видео.html
We have Bernina 830, but embroidery stitch part is not working, can you please suggest. As per your video, it seems one white plastic gear is missing besides disc plates
It's probably this white plastic gear 5:48
the solution is to buy a gear and replace it, replacing the gear is a bit more complicated and not a job for an amateur.
@@MasinskiKutak Thanks for your reply. Yes, we need to take it to the Profesional and replace it. Thanks,we will do it.
Originally how many feets do we have for the Bernina 830 , I have got only 3 while purchase for second hand i.e. for normal,hemming,zip.
Just now I have asked in Bernina service center,Mumbai. They said ,now this old machines parts are not available and company also stopped the manufacturing of these parts, so not sure where can I get this white gear for embroidery stitches
@@shravanighosalkar6420
Yes, that’s true,
but you can find that part new or used on eBay.
@@MasinskiKutak hi,looks like eBay stopped their service for India. Just now I noticed that there is some another part is also missing besides cam shaft gear
Hello, I hope you are well. My recently purchase of a used Bernina Matic 910 looks so much like this 830 Record. Are the mechanics pretty much the same? Can I refer to the same Manual for Oiling and cleaning? Thank you for your reply...
Hi Vera 🙂
The mechanics are very similar, everything is lubricated in the same way, the Bernina 910 has a smaller number of stitches, the advantage of the Bernina 910 is the needle of strong penetration through the material, the Bernina 910 has a different drive and motor as well as an additional electronic board. what this looks like watch this video clip: ruclips.net/video/VlxVCfPNW14/видео.html
Thank you for this video too.
:)
thank you!!!
Hi there from New Zealand. Can i use Silicone mist (CRC) 100% lubricating siicone solvent free. what ever that means
I do not recommend spray oil to lubricate sewing machines, silicone oil, I don't know, I don't use it. I recommend sewing machine lubricating oil.
www.masinskikutak.com/2012/03/osnovno-odrzavanje-masina.html
Hello sir you make very nice video about bernina i have a bernina record 730 with a foot pedel and the problem is i cant adjust the speed anymore it is all or notting, do you have a solution to fix that? Thanks Rob
@rob
How you cannot adjust the speed, is the machine always running at maximum speed, when you press the pedal all the way.?
ruclips.net/video/lN4mZZxwu8k/видео.html
@@MasinskiKutak Hello ,thanks for your quick answer, yes between zero pedel and max pedel dear is almost no difference its almost direct full speed, the rpm switch is working well. Is the pedel working with a big potmeter? Maybe he is not working properly.
Krg Rob
@@rob-rh4jd
The pedal to your Bernina is probably faulty. This can usually be improved.
It is necessary to open the pedal and completely disassemble it, the graphite sheets inside the ceramic case are glued, it needs to be separated, the work is a little tangible and inconvenient.
The attached link will see something very similar and you gave me an idea for a new video clip, I'll do it when I have time.
ruclips.net/video/SyJ2IgqFGbQ/видео.html
This looks very similar to the 801 which I have (there is only one manual is for 801,801 and 830) - BUT - the top does not lift off like in this video. Is there a hidden screw somewhere?
No hidden screw... Do not use force.!
For the 800 models without carrying handle, the locking of the lid is on the inside.
We open the head cover where the lamp is inside (only open at the back).
We see the knurled screw on the top left ... this we press inwards (against the machine) .. sometimes it's easy sometimes a little harder. ... the lid jumps open in the normal case.
@@MasinskiKutak Thanks very much. I would never have thought to push the knurled screw inwards. I might have tried to unscrew it... glad I didn't.
There are two screws on top of mine plus the release just inside where the light is.
thanks for this video :)
What type of grease do you use I went to the fabric store and they only have oil
It is best to use synthetic ointment, or it can be without ointment.
you can only use sewing machine oil
Thank you so much this video and your reply is very helpful I’m doing it right now it’s a very beautiful machine I got blessed with it’s in amazing shape for 42 years old now I can quilt !!! Thank you so much
The zig zag and embroidery stitches stopped working on my Bernina Record 830. It has been mostly idle for 2 or 3 years and has not been cleaned or oiled far longer. When cleaning and oiling, I determined the silver colored lever inside the machine that slips forward and back into the black slots to engage the zig zag feature failed to move fully into the slots either forward or backward. I oiled around the lever and can manually press the lever into the black slots and the zig zag works, but this can only be achieved manually; the outside lever moves, appears to be functioning fully, but the internal lever does not fully enter the black slots. Apply more oil? Any suggestions?
I assume you mean this part 3:41
It must be determined whether any of the parts is stationary, and all the intended parts must be moved in bearing.
In any case, lubrication is the first option; you can also use a spray agent to dissolve the corrosion and grease deposits if necessary.
Por favor traducir al español.
No utilizo el habla en absoluto, si algo no está claro, no dude en preguntar.
Awful music.
OK, next time we’ll find something better for you 😁😁
@@MasinskiKutak Or just put no music on and tell what You're doing in the Video...
@@SH1974 We will do everything as you say 😄😄
I loved the music.
On the Bernina 830 record electronic machine, the roller of the thread winding mechanism on the bobbin does not contact the motor pulley. I can't figure out what the reason is and fix this problem. Please help with the advice!
Maybe the rubber flange just wore out,?
you switch on the winding mechanism but the roller does not press hard enough on the pulley.
Thank you for your reply! I solved this problem in this way: I removed the roller mechanism, lubricated it with oil and developed the rotation of the roller with my hands, after which it easily began to rotate and wind the bobbin. The car didn't work for a long time, I had to lubricate everything, now it works like clockwork! There was one problem with the rotation of the middle handle, it did not rotate at all, I did not disassemble and remove the panel yet, but simply oiled it as best I could. It's spinning now, but very tight.@@MasinskiKutak
Great 👍
take advantage of the situation and lubricate the entire machine.