Great how-to video! When my H/L Pershing came the 7.4vdc 1800mah battery would not fit in the compartment due to the connector was installed on the (IMHO) wrong side of the compartment. So I had to take off the top and remove the pins out of the batt connector and move it to the other side of the compartment. Reinstalled the pins in the connector and removed the tabs from the backside of the hatch cover and now it all fits in nicely! Thanks for putting up the video - big help!
Just bought a metal'd out walker bulldog, and paint and several additions need to happen to custom it up. I'd have figured it out. I'd have made a lot of mistakes doing it to, so tanks for streamlining it for me!
You might want to invest on a good electric screwdriver. Never, ever use a drill unless you’re really hell bent on losing the tread on the wells. Ryobi has a good one with different torque settings. Might as well get a Stanley precision screwdriver heads set that includes different sized hex and torx heads. It doesn’t cost that much along with a magnetic mat so you won’t lose screws and washers. You can get them all from Lowes or Home Depot.
You would do good to invest in better Screwdrivers, then No Channel Locks, that's definitely not needed and the lost washer is needed for even torque distribution.
I have an Abrams and wasn't sure where to start. You answered that question for me.
Great how-to video! When my H/L Pershing came the 7.4vdc 1800mah battery would not fit in the compartment due to the connector was installed on the (IMHO) wrong side of the compartment. So I had to take off the top and remove the pins out of the batt connector and move it to the other side of the compartment. Reinstalled the pins in the connector and removed the tabs from the backside of the hatch cover and now it all fits in nicely! Thanks for putting up the video - big help!
Thanks Michael, much appreciated. I didn't have a clue how to get into my Challenger 2. You are a star!
Just bought a metal'd out walker bulldog, and paint and several additions need to happen to custom it up. I'd have figured it out. I'd have made a lot of mistakes doing it to, so tanks for streamlining it for me!
how do you take out the gear box i can get one side out but the other is blocked by the smoker bracket
just file it down with some sandpaper. it works for me.
You might want to invest on a good electric screwdriver. Never, ever use a drill unless you’re really hell bent on losing the tread on the wells. Ryobi has a good one with different torque settings. Might as well get a Stanley precision screwdriver heads set that includes different sized hex and torx heads. It doesn’t cost that much along with a magnetic mat so you won’t lose screws and washers. You can get them all from Lowes or Home Depot.
Just got this today and thank god this video existed. I don't know why Heng Long doesn't tell you how to disassemble it, quite disappointing.
so my pershing is missing a smoke tube does anyone know were to buy a new one?
Burning Patato try heng long for parts or other places online
@@absentplaysauditore5653 thanks I repairs it,I found it in the box broken off. I reglued it on thanks tho.
You would do good to invest in better Screwdrivers, then No Channel Locks, that's definitely not needed and the lost washer is needed for even torque distribution.
BUT NO ONE HAS AN ASSEMBLING GOR RC T90!!?!?!
how do you remove the center caps cant get mine off are they glued ?