You get a big thumbs up for telling the truth and if they dont adjust the product then why bother with them... Winners make there products better. Losers think they got it right and just do not have a clue...
So I just bought this set. I been doing A/C and refrigeration for 11 years. Always used analogs and calculated subcool and superheat using temp clamps and using math the guys at my place of work like all the digital stuff until I was intrigued with wireless field pieces. I don’t want to pay $600 + for a setup so I saw these. Good review makes me feel better. I’m not too worried about the brass fittings leaking I can rig stuff up if needed. It’s amazing how technology came a long way . Thanks for the review
Great honest review. I've seen in other reviews that you really have to tighten them down to avoid leaks - so you have confirmed this. I also like the displays - just wish the temp gauges also had small displays - that would be even better. As for the App, there may be an option in their Settings part that indicates the actions/connectivity of the probes when you turn off the probes. Something like always remember gauges drop when turned off. Something like that.
These work great! Had them for 2 years now and never had an issue or leak. You need to use thread tape for the gauge threads and then add or use any fittings. But yes the fitting with curve does not work at all. Had same issue with that one.
The rubber bushing fell out of my high pressure hose the first time I used my new manifold. The fittings are cheap also surprised they are not low loss
I've had this set for awhile now. So far it's been great accept for the tee that has leaked from the beginning. I use it for quick diagnostic to measure pressure's otherwise I use my fieldpiece probs.
I have an amazing product that can fix a ton of the issues you were having. Now this product is very new so I may be mispronouncing it but I think its called "Tephlan Tapè." It should be by the burn remover and your van's blinker fluid.
Maybe I didn't mention it but I clearly had it out at 8:17 with my nylog as well, nothing sealed it until I forced the crap out of it. But thank you for your awesome comment 👏🏽👏🏽👏🏽
@@ReliableHVACR I figured you were smart enough for it but I was just making a joke. I haven't run into the issues you had but the biggest issue I found it the weight of the gages themselves and the amount of fittings you need can all contribute to leaks. I overall like them for quick pressure readings but past that, I would use normal manifolds with small length hoses. I also work with equipment that can have a negative suction pressure so if I add my gauges as is, I can add air to the system.
Just purchased these, going to give them a shot. I have the Testo set and I cannot stand that you have to use your phone for everything. It's nice if you're going to be at one place for a while and can track everything on the phone and also get a data log to save for later but if you're just doing PM's and need to check a bunch of systems it's clunky at best. I usually keep just stubby individual gauges in my bag but then it's a pain getting the pipe temperature. I wish somebody would make a pipe clamp with a digital readout instead of the k-type clamp or full Wireless. That would be nice. Got the $17 Leak Detectors with my order as well so going to give them a try. Those might be nice to use on some of the bigger leaks that are easy to find before breaking out the H-10.
Should have put that money into the 6 piece FP JOB LINK set with air probes, when combined with the Measure Quick APP it will actually take the info from all probes and give you a diagnosis while giving you system performance data and tell you what your most likely issues are with the system! Pricey YES, but they give you every piece of info you need down to RH DB WB enthalpy and actual system capacity.
How did you get to have both gages display on your phone I can only do one at a time If i add the second gages it is just switches to the other gage Never both together Any idea because your display both at the same time
I don’t like having to use a phone when I juts want to do a quick check. I carry stubbies in my bag but compared to the probes they’re bulky. Probes in that size with a display would be a game changer
Just tryed mine had issues with recharging with the T idk I charged up it seemed like it got stuck in the t or something I ended up removing the shrewder valve in it and worked good.. seemed to either get stuck at the charging pressure or it would read no refrigerant idk
I have the Appion ION PT set, love em. They stopped making em which is a shame. Thermistor accuracy is rated at + or - .27*F literally the most accurate thermistor I own. Looks like Appion or Elitech ripped off the name and style lol
The cheap version of appions ion gauges. I’ve been using mine(Appion) for over 4 years, they still work fine and the app still works even though they are discontinued. Idk if you ever saw the commercial appion made for these but they were ment to be abused. I’ve been seeing more of these Elitech stuff and honestly I’m not impressed something straight out of toys R us. We’ll see if this company is still around in couple years.
My Appion ION set is still going strong, wicked reliable and accurate. They say they're making a new set, but supply issues and C19 have delayed it until next year lol
All the app stuff is so silly to me. It's nice for getting additional info and whatnot as an option. But relying 100% on your phone is so annoying. 100° out and I am doing the connection dance and squinting at my phone. Just show me the goddamn numbers. I just need the numbers. Long story short these look slick af.
I have about 25 years in the field. Never used these new tec stuff . Retired from hvac. I just order this new product. Seems good for the price but I hope it works. I have 30 days or more 8:26 warranty. Full refund. From Amazon. Still alot of money
You get a big thumbs up for telling the truth and if they dont adjust the product then why bother with them... Winners make there products better. Losers think they got it right and just do not have a clue...
Thanks 🙌🏽 they're aware now and are looking into it. Hopefully it was just mine.
I been using the Elitech scale , Elitech leak detector, Elitech digital manifold, with no problems 🤷🏻♂️
So I just bought this set. I been doing A/C and refrigeration for 11 years. Always used analogs and calculated subcool and superheat using temp clamps and using math the guys at my place of work like all the digital stuff until I was intrigued with wireless field pieces. I don’t want to pay $600 + for a setup so I saw these. Good review makes me feel better. I’m not too worried about the brass fittings leaking I can rig stuff up if needed. It’s amazing how technology came a long way . Thanks for the review
I've owned these 2-3 years and replaced the adapter with short hoses works incredible. Elitech released an update for the app
Great honest review. I've seen in other reviews that you really have to tighten them down to avoid leaks - so you have confirmed this. I also like the displays - just wish the temp gauges also had small displays - that would be even better.
As for the App, there may be an option in their Settings part that indicates the actions/connectivity of the probes when you turn off the probes. Something like always remember gauges drop when turned off. Something like that.
These work great! Had them for 2 years now and never had an issue or leak. You need to use thread tape for the gauge threads and then add or use any fittings. But yes the fitting with curve does not work at all. Had same issue with that one.
Adrian - good review. Best reviews are from the users in the field. Thanks for sharing.
Much appreciated!
That rooster 🐔 was going nuts
I know 😂 there's a lot where I am now
The rubber bushing fell out of my high pressure hose the first time I used my new manifold. The fittings are cheap also surprised they are not low loss
Nice and complete review, good work man
Appreciate it, thanks 🙌🏽
I've had this set for awhile now. So far it's been great accept for the tee that has leaked from the beginning. I use it for quick diagnostic to measure pressure's otherwise I use my fieldpiece probs.
Thank you for techcing how to use the digital Elitech Scale I like the hold set up.
I have an amazing product that can fix a ton of the issues you were having. Now this product is very new so I may be mispronouncing it but I think its called "Tephlan Tapè." It should be by the burn remover and your van's blinker fluid.
Maybe I didn't mention it but I clearly had it out at 8:17 with my nylog as well, nothing sealed it until I forced the crap out of it. But thank you for your awesome comment
👏🏽👏🏽👏🏽
@@ReliableHVACR I figured you were smart enough for it but I was just making a joke. I haven't run into the issues you had but the biggest issue I found it the weight of the gages themselves and the amount of fittings you need can all contribute to leaks. I overall like them for quick pressure readings but past that, I would use normal manifolds with small length hoses. I also work with equipment that can have a negative suction pressure so if I add my gauges as is, I can add air to the system.
Just purchased these, going to give them a shot. I have the Testo set and I cannot stand that you have to use your phone for everything. It's nice if you're going to be at one place for a while and can track everything on the phone and also get a data log to save for later but if you're just doing PM's and need to check a bunch of systems it's clunky at best. I usually keep just stubby individual gauges in my bag but then it's a pain getting the pipe temperature. I wish somebody would make a pipe clamp with a digital readout instead of the k-type clamp or full Wireless. That would be nice. Got the $17 Leak Detectors with my order as well so going to give them a try. Those might be nice to use on some of the bigger leaks that are easy to find before breaking out the H-10.
Should have put that money into the 6 piece FP JOB LINK set with air probes, when combined with the Measure Quick APP it will actually take the info from all probes and give you a diagnosis while giving you system performance data and tell you what your most likely issues are with the system! Pricey YES, but they give you every piece of info you need down to RH DB WB enthalpy and actual system capacity.
Those gauges are best to mount on a manifold and leave them on it.
Exactly
Thank you for this video
Maybe mount them to an old manifold. And just do the hose
Would either the blue or the red work for simple nitrogen pressure test? I’m installing mini splits so there’s only a low side connection
2 questions 1 can i put these on a manifold and 2 can i use these on a Vacuum pump system without hurting them?
Good review brother 👍🏼
Are the temperature probes adjustable?
Is there a reason your not using pipe dope or Teflon tape for leaks.
How did you get to have both gages display on your phone
I can only do one at a time
If i add the second gages it is just switches to the other gage
Never both together
Any idea because your display both at the same time
For the price if the only thing wrong is cheap fittings id say its worth it. Fittings are wear items anyway.
I’m waiting on Fieldpiece to come out with a new gen probe with display
🤞🏽
So we have gone full circle back to wanting a display 😂😂
@@joeshearer1247 they never had probes with display
I don’t like having to use a phone when I juts want to do a quick check. I carry stubbies in my bag but compared to the probes they’re bulky. Probes in that size with a display would be a game changer
Just tryed mine had issues with recharging with the T idk I charged up it seemed like it got stuck in the t or something I ended up removing the shrewder valve in it and worked good.. seemed to either get stuck at the charging pressure or it would read no refrigerant idk
I had to use my own fittings for this all to work
Still working good? I need a good set :)
Use them every now and then, I like em. Just be aware of the issues I had in the video
I have the Appion ION PT set, love em. They stopped making em which is a shame. Thermistor accuracy is rated at + or - .27*F literally the most accurate thermistor I own. Looks like Appion or Elitech ripped off the name and style lol
can this be used to recharge an R134 system automotive?
Yeah. Fittings and gauges are pretty much universal
what the range of the Bluetooth to the app
Will these work for a pressure cooker?
The highest is 800 on the red gauge
The cheap version of appions ion gauges. I’ve been using mine(Appion) for over 4 years, they still work fine and the app still works even though they are discontinued. Idk if you ever saw the commercial appion made for these but they were ment to be abused. I’ve been seeing more of these Elitech stuff and honestly I’m not impressed something straight out of toys R us. We’ll see if this company is still around in couple years.
My Appion ION set is still going strong, wicked reliable and accurate. They say they're making a new set, but supply issues and C19 have delayed it until next year lol
They're still around. Lol
NOTHING BETTER THAN A YELLOW JACKET MANTOOTH GAUGES
Need to put O rings in them they never fell out
can i use nitrogen?
Probably for the DIY and for the new HVAC guy just starting out but can't afford the very expensive tool's just yet.
you need teflon on threads.
Tried that same thing, ended up just using nylog at the end
@@ReliableHVACR Did the nylon solve the problem of leaking? When switched couplers?
I just bought the fieldpiece, they re a bit pricey, and that s the exact reason i didnt go with the those chinese made digital gauges
Elitech SMG-1
All the app stuff is so silly to me. It's nice for getting additional info and whatnot as an option. But relying 100% on your phone is so annoying. 100° out and I am doing the connection dance and squinting at my phone. Just show me the goddamn numbers. I just need the numbers. Long story short these look slick af.
I have about 25 years in the field. Never used these new tec stuff . Retired from hvac.
I just order this new product.
Seems good for the price but I hope it works. I have 30 days or more 8:26 warranty. Full refund. From Amazon. Still alot of money
👍
I’ve been using them for about year. The fittings that come with them are dog shit. Awesome gauges though
Looks really cheap.
Elitech is junk. I have 2 that I’ll be returning. Went with the over $300.00 BluVac pro.
Looks like an unnecessary toy. imo
I'm gonna mount them on a manifold , they leak