This is probably the best bike build vlog I've ever seen jon. Brilliant. I never realised that much went into a build. And the bike looks, as you guys say awesome !!!! Brilliant jon brilliant. 👏👏👏👏👏👏👍😁
Excellent video and build.. I have a 2020 Madone SLR Project One, the ISOSPEED bolt assembly and Press Fit bottom bracket have been disappointing at best, both replaced several times with no final fix, a clear design failure. So glad Trek went to the T47 BB, hopefully they'll revise the ISOSPEED bolt assembly loosening. Otherwise I really like the bike, just wish I'd know these early design problems before spending $11K...
Heyhey TJ i have a trek madone slr7 segafredo team replica coming june 9 2022(its a 2022) ur issue with the iso speed has me concern since i too spent$11k as well.would u mind sharing with me ur experience / issue with me thanks usmc retired
@@bigdiesel6912 Trek changed the BB to T-47 which seems to have resolved the BB issues with the press-fit that I have. I changed to the BBInfinite ceramic BB and its been great. The ISO-SPEED bolt and nut are still a constant issue with continually loosening, Trek Store replaced the entire assembly, but the bushings still wear after a few 100 miles and the seat post sways like a sail. I've had countless cyclist riding behind me and say "Your seat post loose and/or swaying, is it supposed to sway like that?" I'm 6'3", 225lbs and the issue continues. Several local cyclist had their seat post crack, Trek warranted it and most have replaced their Madone's with the Emonda, fewer parts. Trek needs to decide if the Madone is a 'RACE' bike or not, don't try to make it an all-around bike. Design and make the bike for what it's purposed, flat out speed and aero... Otherwise, I like the Madone platform, its handling and performance but they need to redesign and get rid of the ISO-SPEED. Make it a RR and Crit killer with compliance... not a cruiser.. I too have a considerable investment in this bike, several aftermarket upgrades.
what up JM hows the wifey an kiddies .glad too see u bck bro./Great video.i need some advise my trek madone slr7 is arriving on june 9 instead of may 23.i concern about new parts being replaced by old parts likemy chain ring or batteries irequested the box not be opened until i arrive .Reason every one at this shop is either new guy or frm other shop.any advise you can pass on would be greatly appriciated.RK usmc retired
@@jonmaloneycycling7593 thanks Jon for timely response did make that request.and i was asured it will be honored .one thing .i purshased my madone in aug 2021 ..butas of this month they are starting the painting of my bike .not sure why that is .if u have any ideas pass it on.thanks RK usmc retired
I just got a madone with the 8150 ultegra. Do I need an attachment to setup the buttons on the top of the hoods? I can't find it in the app, it does say something about add an attachment tho.
Lovely looking bike, I’m curious about the Aeolus RSL bars, are Madone frames coming with those instead of the previous aero bar stem combo, or did you specifically request the RSL bars? I’ve just ordered a frame and was asked which bar stem size I would like but I’m now curious to know what the frame will come with?
Love the paint job. Thanks for the video. Wow you have of tools. I could not do this build at my current tool level. Why did you start the handle bar wrap at bottom with tape at the top? I like starting at the top with no tape and pushing the tape ends in to the bars at the bottom. Very clean look. Just my thought.
I'm trying to build mine myself too. But I can't get the frigging shift and break cables through the "integrated" stem/handlebar! I can get it through the frame easily enough. Maybe a dental pick would help with the handlebar.
get the park tool routing kit www.probikekit.ca/bicycle-tools-and-maintenance/park-tool-ir-1.2-internal-cable-routing-kit/12955199.html?affil=thggpsad&switchcurrency=CAD&shippingcountry=CA&&thg_ppc_campaign=71700000080543046&gclid=Cj0KCQjwxdSHBhCdARIsAG6zhlVyTgN_oq4Ce-4hFmABrtYYL2v-OW0xE-_ptTU05qC0a18kx-0kIkUaAj4bEALw_wcB&gclsrc=aw.ds
Thx so much bro! It’s a 3/8 I would have bought something better quality if I could go back. Sometimes the bits get stuck on it and it a pain in the ass
The frame doesn't even come with threads? You have to tap everything? Interesting. Is it cheaper to build it yourself? I would love to build my own bike. I have rebuilt sport quads from the frame up and it very satisfying when finished. Beautiful build BTW.
It came with threads, but because its painted, the paint gets in the threads and clogs them up. I all depends on the cost of the parts, and if you already have some. In this case. I had a lot of the parts on hand.
Beautiful build. Now put an AirTag on it:) I just finished a 60cm Madone SL6(warranty frame) build; 18lbs 7oz with PM, mounts and pedals. What is your weight weenie stance on me trying to save 1 lbs? Love the channel, keep up the great work and more pro and cons comparisons please.
@@jonmaloneycycling7593 right, I am only quoting 1.97 kg for the frameset from the website. According to your measurements in the video, the combined weight of frame and fork is 1471g. Everybody says Madone is heavy, but 1471g is not heavy at all. Anyway, very nice video👍
John, awesome video. Question How tall are you? I see your Madone is a 54. i have a chance to get a new SLR9 size 54 custom paint project one and I'm like 5' 10.5" and worried it might be a little small for me. I currently ride a Pinarello and it measures 54.6cm.
The filming makes it take way longer, because I have to get my wife to do it and it needs to be on her schedule as well. For instance I would working on it at 10pm, but she wouldn’t want to film at that time, so it makes it drag on. Without filming, it would take me about 4 hours, all in. Maybe double that with filming.
Hey Jon, amazing build, I was debating between this frame and the emonda in the same colour way but ended up going the emonda upgrading from the SL 5, just curious what you did at the start of the build at the thru axel threads
I'm jealous. About the bike and the fact that you can build it yourself.
Thanks
Looks amazing! Great attention to detail in the build and video production.
thank you
Your workshop!! 🤤🤤😍
Thank you
Awesome song choices . Gave me vibes of Bonobo , had to Shazam them .
Dylan Sitts - Bryant Bark
Jones Meadow - Grass
Thanks
Awesome video, bike and music. It must be very satisfying to build your own dream bike.
It really is! Thanks bro!
Hypnotizing! Nice work Jon
thank you
Love the build. Thanks for sharing. Can't wait to see it out on the road.
Thanks
John. That is amazing. Keep going bro.
thank you
Looks amazing! True craftsman
thanks. appreciate it
This bike is sick man 👍 … and so is your workshop 🤩. Immediate LIKE.
Thanks so much bro
Great looking bike, lovin that paintwork
thanks so much
cool soundtrack👍👍
thanks
Dope bike. Amazing you did the entire build yourself
thank you
Nice work with external shifters !! and build overal
thank you!! had a lot of fun doing this
Great bike built and awesome cam work. Greetings from Finland, great channel!
thank you so much
Jon this vid is amazing. Kudos!
Thanks. Appreciate it
Great job on the video! Love the attention to details!
thanks. appreciate it
Excellent build buddy!!!
Thank you
Great vid. Love how you weighed each part for the inevitable spreadsheet !!
Thanks
Great video and really looking forward to the Emonda build! Greetings from the Dominican Republic!
Awesome! Thank you!
That is a stunning bike. 😍
thank you
Nice build Jon and nice work station as well. Congrats.
thanks!!
That was absolutely awesome! I’d love to be able to build my own or a bike for my children someday.
Thank you!!
Bb spin looks slippery!! Sweet ride.
Thanks!!
Looks awesome and I'm sure it is a great ride. Impressive doing the build yourself.
thanks so much
This is probably the best bike build vlog I've ever seen jon. Brilliant. I never realised that much went into a build. And the bike looks, as you guys say awesome !!!! Brilliant jon brilliant. 👏👏👏👏👏👏👍😁
Thank you so much. Appreciate it
great video, and of course nice ride!
thanks
Outstanding video. 👏👏👏
Thanks
Awesome build, so pleased for you mate
Thanks bud
professional work 👏💪
thank you
Excellent video and build.. I have a 2020 Madone SLR Project One, the ISOSPEED bolt assembly and Press Fit bottom bracket have been disappointing at best, both replaced several times with no final fix, a clear design failure. So glad Trek went to the T47 BB, hopefully they'll revise the ISOSPEED bolt assembly loosening. Otherwise I really like the bike, just wish I'd know these early design problems before spending $11K...
Good to know, thanks
Heyhey TJ i have a trek madone slr7 segafredo team replica coming june 9 2022(its a 2022) ur issue with the iso speed has me concern since i too spent$11k as well.would u mind sharing with me ur experience / issue with me thanks usmc retired
@@bigdiesel6912 Trek changed the BB to T-47 which seems to have resolved the BB issues with the press-fit that I have. I changed to the BBInfinite ceramic BB and its been great. The ISO-SPEED bolt and nut are still a constant issue with continually loosening, Trek Store replaced the entire assembly, but the bushings still wear after a few 100 miles and the seat post sways like a sail. I've had countless cyclist riding behind me and say "Your seat post loose and/or swaying, is it supposed to sway like that?" I'm 6'3", 225lbs and the issue continues. Several local cyclist had their seat post crack, Trek warranted it and most have replaced their Madone's with the Emonda, fewer parts. Trek needs to decide if the Madone is a 'RACE' bike or not, don't try to make it an all-around bike. Design and make the bike for what it's purposed, flat out speed and aero... Otherwise, I like the Madone platform, its handling and performance but they need to redesign and get rid of the ISO-SPEED. Make it a RR and Crit killer with compliance... not a cruiser.. I too have a considerable investment in this bike, several aftermarket upgrades.
Sweet build! That bike looks fast sitting there ⚡👌
Thanks! 👍
Awesome video!
thank you
AWESOME BIKE ;) !
thank you bud
Hi, beautiful build, I have the same in pearl white and would like to know the Garmin mount you're using. Thanks
I am using www.rec-mounts.com/ from Japan
@@jonmaloneycycling7593 thanks so much
Well done Jon!!
thank you
Well done, I could never do that.
Thank you
haven’t watched the whole thing, saving for my zwift session but first impression, wow that paint job!!! also solid cam skills showing off the paint!!
thank you
just finished watching, my god this video was so well done and relaxing to watch. You really know how to build a bike!!
@@luxsasha Thank you
what up JM hows the wifey an kiddies .glad too see u bck bro./Great video.i need some advise my trek madone slr7 is arriving on june 9 instead of may 23.i concern about new parts being replaced by old parts likemy chain ring or batteries irequested the box not be opened until i arrive .Reason every one at this shop is either new guy or frm other shop.any advise you can pass on would be greatly appriciated.RK usmc retired
Thanks man. I would ask the shop to leave bike in box and that you want to open the box and be there for the build
@@jonmaloneycycling7593 thanks Jon for timely response did make that request.and i was asured it will be honored .one thing .i purshased my madone in aug 2021 ..butas of this month they are starting the painting of my bike .not sure why that is .if u have any ideas pass it on.thanks RK usmc retired
Nice bike!!! 😍🔥
🔥🔥🔥
Quality build..I’m a Colnago man but that’s class 💥 👌
Thx man
Boss Build!
thanks
I just got a madone with the 8150 ultegra. Do I need an attachment to setup the buttons on the top of the hoods? I can't find it in the app, it does say something about add an attachment tho.
You can do it with garmin or etube app
Actually really enjoyed thst and the bike looks really good 👍 btw.... you can certainly put a bike together.... great job and health to enjoy 👍
Thank you
Are you clamping the mast or the post? Just got a PCS 10.3, not enough post exposed to clamp that
i am clamping the seatpost
@@jonmaloneycycling7593 thanks, just took mine in, Trek has a special adaptor for the Madone which I just bought, I can’t overtighten it now
@@DietPizza1 Nice
Why do you need to tap all the bolt holes again? Awesome built!
Paint gets into the threads and tapping them just cleans them out, thanks bro!!
Lovely looking bike, I’m curious about the Aeolus RSL bars, are Madone frames coming with those instead of the previous aero bar stem combo, or did you specifically request the RSL bars? I’ve just ordered a frame and was asked which bar stem size I would like but I’m now curious to know what the frame will come with?
The madone comes with the madone bars, I ordered the madone frame and Aeolus bars separate
Nice build and bike !! what is the name of your climb shifter if i want to buy it ? they fit perfect !
These are actually the 9070 dura ace shifters
Got this in the shop yesterday for a tire change. I was scared to even touch it 😅
LOL nice
Love the paint job. Thanks for the video. Wow you have of tools. I could not do this build at my current tool level. Why did you start the handle bar wrap at bottom with tape at the top? I like starting at the top with no tape and pushing the tape ends in to the bars at the bottom. Very clean look. Just my thought.
It makes the tape last longer because you are pushing with the overlaps
Great!
Thanks
I'm trying to build mine myself too. But I can't get the frigging shift and break cables through the "integrated" stem/handlebar! I can get it through the frame easily enough. Maybe a dental pick would help with the handlebar.
get the park tool routing kit www.probikekit.ca/bicycle-tools-and-maintenance/park-tool-ir-1.2-internal-cable-routing-kit/12955199.html?affil=thggpsad&switchcurrency=CAD&shippingcountry=CA&&thg_ppc_campaign=71700000080543046&gclid=Cj0KCQjwxdSHBhCdARIsAG6zhlVyTgN_oq4Ce-4hFmABrtYYL2v-OW0xE-_ptTU05qC0a18kx-0kIkUaAj4bEALw_wcB&gclsrc=aw.ds
I also own a Madone and the Park Tools routing kit is a must-have. It makes maintenance SO, SO much easier :).
@@jreitsma Nice!!
Epic build video, totally awesome! Question. How come you had to tap all those threads at the beginning of the video?
Paint gets in the holes. Just cleaning them out
Hello sir. Just wondering the length of the stem that you chose on this build? And did you get a longer seatpost?
Hey Jon! sweet ride; What computer mount is that?
Its called rec mounts www.rec-mounts.com/
Excellent vid! Your best work yet! Are you using a Lexivon 1/2 or 3/8 inch torque wrench? Is it accurate?
Thx so much bro! It’s a 3/8 I would have bought something better quality if I could go back. Sometimes the bits get stuck on it and it a pain in the ass
@@jonmaloneycycling7593 Thanks. I ordered it from Amazon. I might return it.
The frame doesn't even come with threads? You have to tap everything? Interesting. Is it cheaper to build it yourself? I would love to build my own bike. I have rebuilt sport quads from the frame up and it very satisfying when finished. Beautiful build BTW.
threads probably had paint or top coat in them.
It came with threads, but because its painted, the paint gets in the threads and clogs them up. I all depends on the cost of the parts, and if you already have some. In this case. I had a lot of the parts on hand.
Beautiful build. Now put an AirTag on it:) I just finished a 60cm Madone SL6(warranty frame) build; 18lbs 7oz with PM, mounts and pedals. What is your weight weenie stance on me trying to save 1 lbs? Love the channel, keep up the great work and more pro and cons comparisons please.
Great idea on the airtag. I am trying to shave as much weight off of mine, so I say go for it. Get it as light as you can
is your scale working properly? The frame+fork weigh 1970 g on trek website, but here on your scale 1471g, a 500 g difference.
The weights on the website don’t include tire, cassette, disc, etc.
@@jonmaloneycycling7593 right, I am only quoting 1.97 kg for the frameset from the website. According to your measurements in the video, the combined weight of frame and fork is 1471g. Everybody says Madone is heavy, but 1471g is not heavy at all. Anyway, very nice video👍
Damn… This makes me want to get a Madone so bad
do it!!
John, awesome video. Question How tall are you? I see your Madone is a 54. i have a chance to get a new SLR9 size 54 custom paint project one and I'm like 5' 10.5" and worried it might be a little small for me. I currently ride a Pinarello and it measures 54.6cm.
Yes I am 5’10 and I find 54 perfect. I had a 56 and found it was too big
Awesome! How long did that take, start to finish?
The filming makes it take way longer, because I have to get my wife to do it and it needs to be on her schedule as well. For instance I would working on it at 10pm, but she wouldn’t want to film at that time, so it makes it drag on. Without filming, it would take me about 4 hours, all in. Maybe double that with filming.
@@jonmaloneycycling7593 Impressive. Thanks for showing us how it's done!
nicely done!👌 but why not go for the custom paint if you’re buying slr?
I picked this color because it was the fastest I could get the frame
Nice build bro! After you ride it which one is your favourite? Madone SLR or Emonda SLR?
Its hard to decide, once I get my emonda I will do a video comparing them
@@jonmaloneycycling7593 cant wait!
How much was the total parts cost and would you share with us including all the tools?
I would say at least 15k with the tools
Hey Jon, amazing build, I was debating between this frame and the emonda in the same colour way but ended up going the emonda upgrading from the SL 5, just curious what you did at the start of the build at the thru axel threads
Great choice, I love the emonda, its to remove the excess paint in the threads
La batterie de cette machine ce retrouve où ? Merci
Why did you re-tap all of the threads?
The paint gets in the threads and clogs them up, not a huge deal, but after tapping them, they are 10 times smoother
sram force on this bike is only one mystake check the brake pad .....????
Hey Jon, how tall are ya? I’m looking into the same frame. So curious to know your height and inseam to see if a 54 is right for me too.
I am 5’10 and 32 inseam, 54 fits me perfect
The bike looks great. How come you didn't go for Bontrager wheels? Newly released Rsl 51 or 65?
I would have got the rsl wheels if they were in stock, but the soonest I can get them is the end of the year, which sucks
@@jonmaloneycycling7593 ..tell me about it. I've orderd the RSL51s, delivery sometime 1st half of next year! 🤦♂️
@@jonmaloneycycling7593 Nice. Will be following your channel. Good honest content. Keep it up!
@@slash18gabita Thank you. Appreciate it
Do you have ride review experience on it?
Which tires did you use ?
Schwalbe One Tubeless 30mm
my dream bike
Thats awesome. Im getting a 54 too, how tall are you? Also, are those Zipps tubeless only or can you do both?
You can do both, but need tubeless tires
Hello, could you provide the part number, it is about the DUB bottom bracket, please
17.46 kg or lbs ?
That’s in Lbs
why am i getting a 3 minute advert that i cant get rid off? i just want to watch the clip!
Hope you enjoyed the video