I got the English Egret Mini Limited Run did recently, and it's exactly the same, just the box is in English. Does the patch also allow you to leave the trackball games SD card in the machine without removing the original games on screen too now? I've not updated mine yet.
It's basically a firmware update, once the SD card is finished flashing you can switch in your trackball games SD. We would've tested the trackball/spinner portion but for that, I'd need to sell a kidney.
I done mine just now as I have the same one as you Larry, no difference, would have been nice that with the SD card games in you also have access to the other games. Bleh.
@@VirajKathwadia The firmware update did fix this issue, after updating you have access to all 50 games, no SD game card required. When you plug in the spinner/trackball controller, the games list automatically displays all 50 games. If the spinner/trackball controller is not plugged in, it only displays the original 40 games. So you no longer need to insert the SD game card to play the 10 extra games, just plug in the spinner/trackball controller and you're good to go. This is great as it leaves the SD slot open for Arcade Memories Volume 1.
@@TeamPandory famous hentai mame game! tested the mayflash adapter but for some reason some games (black metal and darius) want to register the pads as player 2 and wont run :(
Updating this thing is a pita for me. I have to get 2 adapters for my sd card to receive the update and then have to use tweezers to remove the card from the Egret 2 mini (the card doesn’t eject by itself) Wish they could’ve just made it wifi compatible but I guess they were trying to save money. Thanks for the video.
Hi pal, I did all of this and I got an “error: cannot mount SD” error when I held down the two buttons at startup. Same blue screen but an error message. Any idea why that’s happened? The card was already on fat32 so I left it as it was, pasted the .bin file onto the card but nothing. The .bin file had no thumbnail on the file so maybe I’m doing something wrong? Thanks!
Try formatting with RUFUS... Or another SD card. Updating can be iffy if you don't have a good memory card - be it to their required spec, or simply "a non fake" ... Fake test that memory card :-)
@@TeamPandory Cheers bud! It works now. Got a final question- I’m using my 2019 MacBook Pro charger as a convenient power supply for the Egret, but as it’s so big, I’m kinda worried it might be too powerful and fry the system or something. Is this the case? I’ve been using it out of convenience
![The BEST Mini Arcade Cabinet - Taito Egret II Mini, Sega Astro City Mini or NeoGeo Mini [Roundup]](http://i.ytimg.com/vi/GxVj2Lp0f_o/mqdefault.jpg)
ah we really life in weird time, its feel really weird to see old game need to get update so its can run just like back when its release.
It's as if we're trying to hold onto those memories.
I'm still 29 years old.
...In my mind.
I got the English Egret Mini Limited Run did recently, and it's exactly the same, just the box is in English.
Does the patch also allow you to leave the trackball games SD card in the machine without removing the original games on screen too now? I've not updated mine yet.
It's basically a firmware update, once the SD card is finished flashing you can switch in your trackball games SD.
We would've tested the trackball/spinner portion but for that, I'd need to sell a kidney.
I done mine just now as I have the same one as you Larry, no difference, would have been nice that with the SD card games in you also have access to the other games. Bleh.
@@VirajKathwadia The firmware update did fix this issue, after updating you have access to all 50 games, no SD game card required. When you plug in the spinner/trackball controller, the games list automatically displays all 50 games. If the spinner/trackball controller is not plugged in, it only displays the original 40 games. So you no longer need to insert the SD game card to play the 10 extra games, just plug in the spinner/trackball controller and you're good to go. This is great as it leaves the SD slot open for Arcade Memories Volume 1.
Is the Arcade Memories pre-order (on Amazon Japan) 'with body' the cheapest option? It's ~10k yen cheaper than an Egret II on it's own currently.
Egret II Mini and Arcade Memories Vol1 for 18000 yen atm. I bought the Egret II Mini at release for 17000, not bad for the extra 1000 I guess
I didn't read anything about needing to reset factory settings. ?
You probably didn't need to. I saw something on the site that said "activate" or "initialise"- that usually means reset.
Did I hear "...soon we can expect a port of Batocera"?
That you did! :-) Link to check the progress in the description
I saw the video, now I officially need the Egret II mini with it's unique rotating screen! Hope the latency can also be improved w Batocera.
@@Snarko I have a feeling it'll be better than stock as there are differences in latency by only switching emulation cores.
have you tried alternative control pads on this? the only one i have had success with is the evercade pad!
ps when are you streaming lady killer lol
It should work with xbox360 compatibles. We tried a few out in the egret 2 mini review, maybe? 🤔
@@TeamPandory saved me a load of money thanks! i have a xbox 360 pad and a mayflash magic ns rev 2 card also
Cool 😎
Btw: lady killer? 🤔
@@TeamPandory famous hentai mame game!
tested the mayflash adapter but for some reason some games (black metal and darius) want to register the pads as player 2 and wont run :(
Updating this thing is a pita for me. I have to get 2 adapters for my sd card to receive the update and then have to use tweezers to remove the card from the Egret 2 mini (the card doesn’t eject by itself) Wish they could’ve just made it wifi compatible but I guess they were trying to save money. Thanks for the video.
Hi pal, I did all of this and I got an “error: cannot mount SD” error when I held down the two buttons at startup. Same blue screen but an error message. Any idea why that’s happened? The card was already on fat32 so I left it as it was, pasted the .bin file onto the card but nothing. The .bin file had no thumbnail on the file so maybe I’m doing something wrong? Thanks!
Try formatting with RUFUS... Or another SD card. Updating can be iffy if you don't have a good memory card - be it to their required spec, or simply "a non fake" ... Fake test that memory card :-)
@@TeamPandory Cheers bud! It works now. Got a final question- I’m using my 2019 MacBook Pro charger as a convenient power supply for the Egret, but as it’s so big, I’m kinda worried it might be too powerful and fry the system or something. Is this the case? I’ve been using it out of convenience
Very happy to see an update!🙂👾👾
:
🚀
Yeah definitely, and Batocera for this thing is gonna be so good!
any news on that batocera port?
It's out. We've made a video on the astro mini, but the process should be very similar.
Terrible latency! What is the point of these devices given that the manufacturer is doing the bare minimum to ensure their product works as expected?
This one is nowhere near as bad as the mini v was.
I've the limited blue edition , the firmware is for it also? Thanks.
AFAIK it's exactly the same but in blue.
What is the screen model number?
Would love to see a video on the batocera hack. Hopefully it improves the latency
Bit crazy, but I'm currently recording voiceover for a Batocera on the Astrocity mini video 😊. Universe.
If it goes well, I'll jump on the egret asap
@@TeamPandory awesome