A whole lot easier and better if you remove the caliper bracket and leave the caliper connected by the brake oil hose. Place caliper on top of box and mask off surrounding area. I just finished mines yesterday. Also did not use primer, painted directly on surface after having cleaned and sanded surfaces.
Going to let you know...LISTEN UP..if you decide to do this please! Put plastic on entire vehicle you will get overspray on the entire car or truck i had to buff it out! Just be careful ...and paint thinner will not be good on vehicle but i also grinded and sand down every caliper flush..all dye joints from the molds looks awesome
It’s always best to mask off all areas of the vehicle to avoid overspray, especially if you’re a beginner or trying this in a windy area. Thanks for sharing your thoughts and watching the video.
Definitely going to use your video when I do mine, but question? Should I also add a clear coat at the end or is that just personal preference. Happy holidays btw!
Hey why not lol, Happy Holidays to you and yours as well. Since the aerosol can already has a clear coat finish there’s no need to add extra clear, I’m almost certain that by doing so you could possibly dull it down.
Learn about thermodynamics... Breaks Galipers do not get super hot like everybody thinks... Unless you drive your car with your foot on the break and on the gas pedal... See it this way... When cooking something in your oven. When you touch the oven do you burn your hand ? No because the heated energy is in the oven. Not all over the oven.
Thanks for sharing your thoughts and you are right about that, here’s more knowledge to go along with your comment. The materials from the brake pads protect and prevent the rotor from heating up, once the brake pads wear down to the metal you’ll experience the heat extracting from the wheel area. When you hear the brakes squealing dust corrosion will then be created to warn you that the brakes are failing. Overtime the metal to metal will continue to overheat and land onto your rims burning through the paint causing pitting issues that’ll leave you having to repair or replace your rims.
Excellent tutorial. Thank you for sharing your knowledge.
You’re welcome and thanks for watching the video.
Good job.. my daughter and I will do this next week as a project👌🏾💎😎
I would cover the fender and door with a cheap plastic drop cloth
Thanks and I appreciate you for watching the video, I’m sure that you’ll be pleased with your confidence in doing so.
Nicely done. I think I’m brave enough to try it on my Tahoe this Spring.
Thanks for the compliment, you can definitely make it happen.
Love the safety element, nicely done there.
Not sure the calipers get hot enough to warrant that, but can’t hurt
Thanks and I appreciate you for watching the video.
A whole lot easier and better if you remove the caliper bracket and leave the caliper connected by the brake oil hose. Place caliper on top of box and mask off surrounding area. I just finished mines yesterday. Also did not use primer, painted directly on surface after having cleaned and sanded surfaces.
There are multiple ways to complete this project, thanks for sharing your method with others who may want to go a different route.
Thank you. You gave a girl like me a little hope that I can do this myself😁.
With the correct knowledge, materials and confidence you definitely got this.
Brilliantly done bro !
Thanks for the compliment and watching the video.
Brilliant. Thank you Newtouchauto it's just what I was looking for. Nice job!
You’re welcome and I’m glad that you found use of the video, thanks for watching.
Damn, textbook job. Great results and thank you for teaching us the right way.
You’re welcome, thanks for the compliment and watching the video.
was one can of primer and one can of red paint enough ? or how many cans of each would you recommend
1 and 1 will do the job, you should have enough to do 2 more vehicles.
Going to let you know...LISTEN UP..if you decide to do this please! Put plastic on entire vehicle you will get overspray on the entire car or truck i had to buff it out! Just be careful ...and paint thinner will not be good on vehicle but i also grinded and sand down every caliper flush..all dye joints from the molds looks awesome
It’s always best to mask off all areas of the vehicle to avoid overspray, especially if you’re a beginner or trying this in a windy area.
Thanks for sharing your thoughts and watching the video.
Definitely going to use your video when I do mine, but question? Should I also add a clear coat at the end or is that just personal preference. Happy holidays btw!
Hey why not lol, Happy Holidays to you and yours as well. Since the aerosol can already has a clear coat finish there’s no need to add extra clear, I’m almost certain that by doing so you could possibly dull it down.
👏👏👏
Thanks for watching the video.
About how many cans of spray that you need for this project?
1 primer and 1 color coat, should be enough for 2 vehicles.
Humiditation must be prevented - 100%
Thanks for sharing your thoughts and watching the video.
Learn about thermodynamics... Breaks Galipers do not get super hot like everybody thinks... Unless you drive your car with your foot on the break and on the gas pedal... See it this way... When cooking something in your oven. When you touch the oven do you burn your hand ? No because the heated energy is in the oven. Not all over the oven.
Thanks for sharing your thoughts and you are right about that, here’s more knowledge to go along with your comment. The materials from the brake pads protect and prevent the rotor from heating up, once the brake pads wear down to the metal you’ll experience the heat extracting from the wheel area. When you hear the brakes squealing dust corrosion will then be created to warn you that the brakes are failing. Overtime the metal to metal will continue to overheat and land onto your rims burning through the paint causing pitting issues that’ll leave you having to repair or replace your rims.
Right. If they get this hot the rubber would burn up and the siliglide stuff will burn away.