Simple creative ideas brushless motor | Top electronics project

Simple creative ideas brushless motor | Top electronics project
Create a simple brushless motor from an old PC fan. Using any 2 N-mosfet and 4 resistors, the brushless motor is powerful and simple. BLDC motor , ESC
Facebook group : bit.ly/CreativeElectronic
All my projects are free, I design them on EAGLE 6.0. I uploaded it to Google drive. You need to use a web browser to download the file and open the file with winrar software (extract) on the PC. Open schematic file (.SCH) and PCB file (.BRD) with EAGLE software.
Hope you enjoy my videos and projects. Like, share and don't forget to subscribe to my channel. one more thing, thanks to everyone, my channel has reached 50K subscribers.
#BLDC
#12Vto220V
#Creative

[@PhdHung]

Facebook group : bit.ly/CreativeElectronic

[@jagdishsoni2276]

I want to contact you..Give me mail or number..

[@PhdHung]

Contact me on FB.

[@yozepvaozan8894]

Whats your facebook account name

[@manuelferreira8892]

Muito bem ,e uma boa dica ( portugues)

[@sangamsnm5489]

पेट्रोल मॉडल को ठंडा कैसे

[@bambarhan]

Thanks for sharing. Could you tell me that which is the best 1ph and 3 ph? this driver is 1ph?

[@mrjackson4511]

me encanta el video saludos desde Honduras Quimistan

[@Adacaranya]

nice video. really ispired me.

[@LCMNUNES1962]

MUITO BOM VERY GOOD, VOU FAZER ASSIM PRA MIM, BRASIL CONGRATULATIONs

[@PhdHung]

[@kotslp]

Deu certo?

[@reyelektro]

Mantap nihh..keren pokoknya

[@PhdHung]

:))

[@zmsolar]

Can we use it for 12v SOLAR ceiling fan?

[@manpreet6311]

Very nice work thanks very much ....please tell me hom much ampere esc is this and how much kv or ampere is your bldc motor

[@DIYwithBatteries]

Nice explanation with the diagram

[@PhdHung]

[@Mario-ye9pt]

incrível, vou fazer também.

[@supra1466]

Ivnerter huw vou

[@Mario-ye9pt]

@@supra1466

[@Mario-ye9pt]

@@supra1466 🙃 inverter

[@nadeemislam7163]

Can I use this technique for 200v dc and 12A

[@TheBoringReason]

now we need a drone from this stuff

[@dientu97]

Đã thử 2 cuộn đối xứng nhau : cùng chiều và ngược chiều đều k chạy, video a tua nhah quá, mong a tl

[@TVTambangMineral]

Please make a simple brushless video for the Dynamo Alternator

[@PhdHung]

ok, wait me

[@alchemy1]

So how did you get 3 wires coming out of the coil wingdings with two pair coils?
It is obvious you quickly fast forwarded from first to second winding and then the same with the following two winding.

[@ompatel5226]

Obviously tho them are connected
One is communication pin another A1 and A2

[@Khalilkhan6120]

Can i use it for hdd motor

[@jaesseaj2760]

Sir, with this circuit the motor will work optimally or not?
Thankyou

[@promariner2020]

Excelente 100%

[@PhdHung]

Thanks

[@mrhkexperiment]

amazing bhai

[@12lehoangminh81]

Hay quá

[@PhdHung]

cám ơn nhé :)

[@wagnereletronica2024]

could do for engines with 6 stators ? thanks

[@dakshji1428]

Very nice video thanks so much

[@PhdHung]

Yes, thanks for watching

[@smoke_stackz3168]

What if i convert my 220v fan to 12v by putting magnet at the rotor and rewinding the stator with 4 coils it will work or not??

[@manumolinaz]

thanks a lot for the video! Could help to fix a fan here. I have a question if you don't mind... Can I avoid the rewire step? Maybe I can test the circuit before, and then to rewire if do not works?

[@kongmeurn38]

Yup good idea

[@jagdishsoni2276]

Good job bro

[@PhdHung]

Thanks

[@raminramezani-w6s]

واقعا عالیه ❤❤❤

[@PhdHung]

Thanks bro

[@rashidch7014]

Nice....work..

[@PhdHung]

Thank u

[@anuj.experiments7589]

Can I use a real bldc motor for this esc

[@luter1035]

Witam czy mogę podłączyć do tego układu silnik BLDC 24v 8w ,. 0.9A?

[@electronic7979]

Nice project

[@PhdHung]

Thanks

[@farhan..engineer4435]

Nice idia

[@PhdHung]

Thanks.

[@abdelali4373]

The size of the gearbox, which diameter, and the fans, do they have a role and how?

[@sorngchhemcreation8002]

4-wire motor, can he do it?

[@mrpaniyur7431]

dear I couldn't understand for which terminals motor connected ( in case three wired motors ) also

[@t.hussain6278]

good video.
i'm thinking of converting one old conventional ceiling fan to bldc ceiling fan, converting the motor structure and control board. what you think.

[@PhdHung]

I think it will work

[@svkscorpio]

I hope that the circuit that you built is an astable multivibrator and this has 2 output. Where does the 3rd wire for the BLDC outrunner come from?

[@bmwn1954]

خیلی گنگ

[@huumam439]

does it run randomly every time on or run only 1 way??

[@TechnologyFamily1]

does it work for drone

[@madhavbera2654]

Can I use irf3205 MOSFET please reply

[@nadeemislam7163]

Very nice

[@zemilmania2295]

Please can you show how to run old Hard drive motor with this .

[@ziadfawzi]

Thank you

[@PhdHung]

Thanks

[@thuanvo2612]

Lúc đầu xem tưởng nước ngoài thì ra là việt nam

[@PhdHung]

:)) Hầu như ai cũng thế

[@alwinjoy8374]

Plz make a brushless motor using dead celing fan

[@boaz2030]

will it run in 220v

[@FM-qk3sg]

Well, i wanted to make a drone. After this video i want to make a boat : )))

[@evigaming7611]

Sir please tell me component (for esc ) name .
And can I use this esc for 12v dc ceiling fan ??

[@freeenergytransformer5842]

There are many ways to make a simple “free energy transformer,” and one of the simplest methods is to use a brushless motor.
The first step is to remove the fan from the motor. This can be done by unscrewing it or by cutting it off.
Once the fan is removed, the next step is to remove the magnets. This can be done by either unscrewing them or cutting them out.
The next step is to attach the wires from the battery pack to the motor. One wire should go to each of the black and white wires on the motor.
The last step is to attach the propeller or wheel to the motor.

[@portalsteve936]

can we run 1000kv brushless motor for drone with this esc that you have made

[@sachinraikwar5103]

I need to know it also.

[@fury4076]

BROO YOU ALMOST REACH 100K SUBS 💓 IM HAPPY FOR YOU ⚡

[@PhdHung]

Thanks, I am also looking forward to it.

[@imacmta]

Hey nice project, can you make esc for brushless motor With speed control and compatible with arduino. I searched everywhere but I couldn't find the proper source

[@PhdHung]

The harder the project is, the less the views :(
Recently, I built a few simple projects. There are lots of views. So I don't want to build difficult projects.

[@tahsinhassan7485]

Can I use any transistor

[@darhar640]

Tanks bro I'm looking for this only

[@PhdHung]

Thanks, hope you enjoy it

[@user-vs9vk2yn1u]

Good idea

[@PhdHung]

Thanks bro

[@electronresonator8882]

can you make other version of this that able to power a skateboard with a person weigh 80 kg?

[@PhdHung]

I think not. You need a 3 phase motor and an 60A ESC.

[@metinfindikli]

guzlel bilgi

[@PhdHung]

teşekkür ederim

[@isaton1234]

Can I use IRF540n

[@isaarifin9499]

Bisa bikin rc pesawat gak dari brushless nya?

[@tarektitoo9757]

bro how to reverse rotate direction?

[@zerodegree4471]

Please make with 3phase star connertion driver

[@danielfelipelozanoromero3055]

what is the mosfet reference?

[@pugalstech]

Nice vedio

[@PhdHung]

Thanks

[@eliasasfur4726]

Tks. :)

[@PhdHung]

[@adibkreatif]

thank you good lovey

[@PhdHung]

Thanks.

[@oshadasandesh6261]

how many amps in esc?

[@marcocruz263]

Qual consumo em amperes usando 12 volts?

[@krirksakwong5642]

ดีจริงๆ ทำง่ายๆ

[@PhdHung]

Thanks

[@vivekkumarthakur2948]

couldn't able to understand the winding.... could you please make seperate video of winding ???
nd please can u tell is it possible to make circuit using transistor instead of mosfet ??

[@sanjitsinghrayat]

Does bldc work without hall effect sensor?? I saw in many videos they use hall effect sensor to detect rotor position. Can you please explain working in this case

[@sanjitsinghrayat]

Hi.. waiting for the reply..

[@krirksakwong5642]

He make new him self. Different from 3 phase motor.

[@user-yt6mq3ij5p]

عالی 👏👏👏👏👏

[@mandovibrazrocha2295]

Thanks.

[@PhdHung]

[@samixgolzar8192]

does it hall sensor,,?

[@arnolswizzinijer7650]

Hello bro,,,, r u from vietnam? 👍

[@PhdHung]

:)

[@IbrahimMirza525]

Good 👍 bossss

[@PhdHung]

Thanks

[@indianmaker6536]

Super

[@PhdHung]

Thanks . Have a nice day

[@thaychetao195]

Hây quá anh ạ

[@PhdHung]

cám ơn nhé :D

[@roydeyvisduenasbonilla8418]

Waooo aquí encontré el circuito del motor Brusles aprecio tu trabajo

[@cesarhenaorestrepo1824]

Amigo a mi no me funcionó mi motor es un brushless 0802 me podrias ayudar. Mil gracias

[@WeddingInvitationVideosMrGFX]

I finally made it by myself

[@suryapatnaik5720]

Can u explain how to wind the coil

[@mrpaniyur7431]

can u tell which terminal motor connected [phone]

[@sasangolchin9303]

Hi. Plz explain for me, I make it but dosn't work

[@babukartik6124]

Your ESC appears to be quite simple. Please give the ESC components details.

[@marcellfeher5784]

2x IRF3205,Z44N-N-FET
2x 100k and 220 ohm resistor

[@blazerjeffgentilezo5454]

hey ..i really want to do this for a long time .. can this be use for 13000 rpm 12v ? and this would last what i mean it will not burn right away ?

[@PhdHung]

I think it worked at ~ 5000 rpm

[@zerodegree4471]

Can i use this circuit diagram for celling fan motor ???

[@ahmetkoc1309]

İf it is brushless yes you can

[@dientu97]

S a rút đc lõi nó ra hay v e rút toàn xịt

[@dabdoube92]

But how are the Mosfets triggered ?

[@Kebun_saya]

👌❤️😍

[@VineetSharma.]

Can we run BLDC bidirectionally using this esc?

[@PhdHung]

I'm not sure.

[@Dancopymus]

Hello friend; where to buy this type of propeller? Thank you

[@fabianmof3001]

Mosfet or transistor ini esc scematic ? 😕😕

[@GoogleUser-pt9bt]

How do i increase the speed?

[@matsunagakntl4476]

Indonesia menyimak kamu dari negara mana? 😊❤❤❤

[@PhdHung]

That is my secret :)

[@akuwongndesolor9516]

Fanesa putri08

[@arnolswizzinijer7650]

@@PhdHung 👍

[@hemanthkumarr6856]

Can I use 3pin hard disk motor??

[@PhdHung]

I am not sure, I will try.

[@amarjeetsinghbanger2895]

Nice video. Please tell wire number, turns and winding detail.

[@PhdHung]

5:07

[@sidamarali3030]

What if the rotor had only two magnetic poles (north and south)??? Would it work?

[@omerfarukbuyuk5176]

There is no two-pole brushless motor. Three phases are required to be a brushless motor. Three phases means at least three poles

[@smmuazzam3297]

nice

[@PhdHung]

Thanks

[@adaide05]

Wow....

[@PhdHung]

😍

[@GoogleUser-pt9bt]

Do i parallel circuit, add heat sinks and increase voltage for high speed operations?

[@muradaslanov8587]

İ think u can, but have limits

[@muradaslanov8587]

You can add more turn wire for more speed too

[@DeepakKumar-bu6hk]

Good

[@PhdHung]

Thanks . Have a nice day

[@nguyenvanthuong7153]

Anh ơi 2 vòng dối xứng nhau thì ngược chiều nhau hả anh? Nhanh quá coi k kịp

[@PhdHung]

2 cuộn ngược nhau. nó như biến áp đối xứng ấy

[@eleanoramarillas5778]

what is the parts you used

[@smmuazzam3297]

bhai jan miri comint ko pined kar dea karo urdo vala thanks

[@sopiyan7958]

what if cable 4 is like on a motorbike hard drive, ask for the tutorial 🙏

[@PhdHung]

ok bro

[@beldewpie3174]

If it is like that then it might be y winding first find the tapping point with Y which is the centre of y winding