Until now you are the only one I have seen actually run a brussles engine and not to mention that it is a simple modification and yet the other channels on RUclips are incompetent at the moment.👍
That ring wire connectors prevent a correct termal flow irfz44n should touch directly to the termal pads if you use on a real power, it will heat and damage. thanks a lot.
Nope it just creates a 3 phase oscillation to run it, using a common negative, drone esc's are cheap and efficient for bldc motors but those won't run a hard drive motor but this one can.
सर मैने यह सरकीट बनाया हे और मेरे पास 2200 केवीकी बी एल डी सी मोटर हे आपने जैसे दीखाया हे हे वैसेही कनेक्शन कीया है लेकीन मोटर चलती नाही हे जो 1 एमका रजीस्टर हे जहा प्लसका वायर लगाते हे वहा लाल होता हे और मोसफेटभी हीट होते हे कारन सोल्युसन बताये धन्यवाद
Electronics projects for Beginner : ruclips.net/video/EHNdeFm1t1U/видео.htmlsi=-7FawHeEotsifhZc
Until now you are the only one I have seen actually run a brussles engine and not to mention that it is a simple modification and yet the other channels on RUclips are incompetent at the moment.👍
Thank you broo..
Does it will spin by itself if it was any four-wire BLDC motor And thank you for your time .
try it. sorry
Buen proyecto me gustó pero sería bueno que ponga el diagrama con éso todo excelente
thanks bro
That ring wire connectors prevent a correct termal flow irfz44n should touch directly to the termal pads if you use on a real power, it will heat and damage. thanks a lot.
welcome thank you
Do you know if its posible to install a ebike accelerator in replacement of the potentiometer
I think can't
Your Mosfets are not in proper contact with the Heatsink because of the lugs connectors in the drain.
yes but use plastic nob and silicon pads
@@homemade_101 Very useful project. Btw, what would be it's amps..??
@chongshenchang9367 the amps drawn is determined by the resistance in the motor, locked rotor ratings determine max Amp drawn
No quieras imitar a zafer yildiz ,te sale muy mal.
how to it work? Does it operate by detecting back electromotive force?
plz check google
Nope it just creates a 3 phase oscillation to run it, using a common negative, drone esc's are cheap and efficient for bldc motors but those won't run a hard drive motor but this one can.
ขอบคุณมากๆครับ
enjoy welcome
Serve para bldc de Air condicionation
yes this is a good one
@@homemade_101 and te feedback for bldc Air condicionation? In the board??
@@SilvioTomazdeAquinoTomaz-sc2mi no feed back bro
In BLDC motor Why you gave (+) input to Drain terminal. And it is necessary to use 1M ohm Resistor in Drain Terminal .
mmmm 🤔
Amazing 😊
thank you
lugs should be place above the mosfets
yes..
drill bitt size?
screw size?
3mm
I built it and It's working fine, thanks.
But the POT doesn't have any effect on the speed, Any suggestions?
thank you. I don't know
Cool 🖤▶️
thanks
Show!
what
सर मैने यह सरकीट बनाया हे और मेरे पास 2200 केवीकी बी एल डी सी मोटर हे आपने जैसे दीखाया हे हे वैसेही कनेक्शन कीया है लेकीन मोटर चलती नाही हे जो 1 एमका रजीस्टर हे जहा प्लसका वायर लगाते हे वहा लाल होता हे और मोसफेटभी हीट होते हे कारन सोल्युसन बताये धन्यवाद
change wire
A successful project. Can I communicate with you through any means you like?
yes this is good circuit. thank you
What
what ?