I'd be furious if that was my rig! How do you drill something out & not touch up bare metal? You can't even rectify that once the nutsert is crimped on.
That's exactly what I thought to myself. Not only is it a fail but they literally documented their fail on video for the client to see, so when that fender panel starts to rust out that replacement is on ET.
These won't fit a JL, but the ones in the following link will! Check them out! -Zach www.extremeterrain.com/barricade-jeep-wrangler-tubular-fender-flares-with-led-drl-marker-lights-j132136-jl.html
Horrible installation. Why are the fenders not made to fit the factory holes? The wheel wells look terrible. Very disappointed with the look of the product and the video.
If they were aluminum or polyurethane flares then factory holes would suffice but with steel you'd have to step it up a size to accommodate the extra weight. But for heaven's sake, if you're going to drill the holes out you can't leave the metal bare to rust out. Horrible install.
WOW!! You scratched that guys front fender so bad and you broke the wire harness clip while being zoomed in on the shot. Every time you used that plastic pry tool you can see new scratches. No masking tape in the entire warehouse? And…who taught this guy how to use tools? Bring the women back for the installs. Holy crap I’d be pissed if that was my Jeep.
22:34 is the most cringe part of this video, but from the jump I was like how did they edit this video and feel any of it was good? From calling tools the wrong name, to no paint protection, to no paint, to walking the drill and not using the center punch in your pocket. Holy crap would I be pissed if this was my jeep like many have stated in this comment section. I get a lot of stuff from XT and this video was a total let down on the quality control. Please take any tool that man picks up and remove it from the room he is in at once!!!!!
Shop these Barricade Slim Fender Flares: terrain.jp/3mxLIsj
Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
I'd be furious if that was my rig! How do you drill something out & not touch up bare metal? You can't even rectify that once the nutsert is crimped on.
I like them! But I think the inner fender liners at least for the front should be added
Definitely would go with a metal kit fender. A lot of work to be putting plastic back on. 13mm Crescent LOL
Those are gorgeous! I want those.
They're sharp, right? Thanks for watching! -Zach
Drilled out the holes & left the metal bare? That's a auto-fail...y'all should know better especially being in the North East.
That's exactly what I thought to myself. Not only is it a fail but they literally documented their fail on video for the client to see, so when that fender panel starts to rust out that replacement is on ET.
What size tires are on that jeep?
Pretty sure these are 305/70R17s! -Zach
@@extremeterrain thank you for the response!!! Love it and love the site!!
Very poor installation, poor use of tooling & no corrosion protection on drilled holes
Looks awful without inner flares
Would these fit on a jku?
They absolutely will fit on a JKU! -Zach
What about JL’s?
These won't fit a JL, but the ones in the following link will! Check them out! -Zach
www.extremeterrain.com/barricade-jeep-wrangler-tubular-fender-flares-with-led-drl-marker-lights-j132136-jl.html
If you like Nemesis try me
Look really nice but at 300 idk
Horrible installation. Why are the fenders not made to fit the factory holes? The wheel wells look terrible. Very disappointed with the look of the product and the video.
If they were aluminum or polyurethane flares then factory holes would suffice but with steel you'd have to step it up a size to accommodate the extra weight.
But for heaven's sake, if you're going to drill the holes out you can't leave the metal bare to rust out. Horrible install.
WOW!! You scratched that guys front fender so bad and you broke the wire harness clip while being zoomed in on the shot. Every time you used that plastic pry tool you can see new scratches. No masking tape in the entire warehouse? And…who taught this guy how to use tools? Bring the women back for the installs. Holy crap I’d be pissed if that was my Jeep.
22:34 is the most cringe part of this video, but from the jump I was like how did they edit this video and feel any of it was good? From calling tools the wrong name, to no paint protection, to no paint, to walking the drill and not using the center punch in your pocket. Holy crap would I be pissed if this was my jeep like many have stated in this comment section. I get a lot of stuff from XT and this video was a total let down on the quality control. Please take any tool that man picks up and remove it from the room he is in at once!!!!!
Video would have been better without annoying loud music.
First comment 😎
Screw that nursert BS!
They are a pain sometimes, but they get the job done! -Merideth
I don’t think I like those