Great walk around the rig during a real QSO, with thoughtful commentary while using it. (I hate channels that push and shove an opinion or try to sell me on something) Licensed since '71 and I've gone through more radios than most people will ever see and the last thing I want is a salesman. First saw your vid 4 months ago and bought the 705 based solely on seeing how much you love operating it. It's a keeper, thanks.
You're most welcome. I try to do this at least once with each antenna. Since I've limited bandwidth to upload videos, I don't normally include it in each, but I do when I can.
50:00 Love you video it is good to see the Icom IC-705 in action and what it can do. I think this is the radio I will eventually get but not at the current prices. I'm from the UK and we haven't had any rain for about a month now it is very hot and sunny. I hear similar reports from people in Germany.
Great video. Expected no less. Hi Hi As much as I am a advocator of using resonant antennas, I have to say, "I am impressed with the non resonant vertical antenna you just set up." Super easy, super fast to erect and no tie points needed to erect it. Pretty slick. I pretty much go to the same park and right under the eve of the pavilion I screwed a tiny brass hook bolt. I mostly use a HWEF40. I attach the UnUn to it and string the wire to a tree about 75 feet away. Simple setup, NVIS but it works and no tuner needed. Looking forward to your next video. You've given so many people some good ideas. Hopefully your sharing gets more people active. Barry, KU3X/QRP
You mentioned learning CW is not like learning another language. I agree. For me, it's more like learning to type. At first, you're learning where the alphabet, numbers, and punctuation are located. Then you learn to recognize letters and numbers faster. Eventually you can type entire words without looking. Same goes for CW. It's already your language and alphabet. The brain still has to move beyond analyzing and reassembling letters into words (or vice-versa).
MPAS 2.0 is a great antenna, super fast to set up and it works so well I decided to leave it up all winter here in Ireland and checked it yesterday and it's as new despite all the wind and rain. I use Noalox, this is essential for the aluminium section and it states this in the manual. On 20m last Summer I made regular contacts from Ireland to South America even as far as Chile with the FT-891 and 100w, single supplied counterpoise and CAP HAT which makes it more broadband, I can work a few bands without a tuner. It's a portable antenna I got to work only portable but now I will take it down only for portable use which is good because it gets a lot more use than I had intended so I get more for my money :-)
I’m quite a bit rusty on my CW. At one time my CW speed was some where between 13 and 20 WPM but that was a very very long time ago. Back in the late 1980’s CW required to get an amateur radio license. I studied CW using the Farnsworth method I set my character speed at a very high rate ( 30-35 WPM) and started the word rate at 5 WPM. Over time I would increase the WPM rate towards 20-25 WPM. One thing I found using the Farnsworth method, that as I increase the word speed I started to hear words instead of characters which made it easier to copy and write down.
Thanks for the great video! I think you also gave me a clue about my ancestors from NC. My granddad was born in 1899 very near the state park you activated and was named Zebulon Vance Owen. I have to believe that his name was derived from a local idol, Zebulon Baird Vance, who became one of NC's governors (the 43rd). Thanks for the activation and the interesting location. 73, KK7PO
Oh wow! Yes, the Vance name is a big one in terms of NC history. The birthplace site is a wonderful little park, too. I've never actually been inside the visitor's center because it's always closed on the days I'm there. Next time you're in the are, you need to put that site on the air! Your grandad will be with you there in spirit. Cheers, Thomas K4SWL
I have the same set of antenna (1 military whip like yours and the CHA extending whip), but I use a coil with an aligator clip for tuning and elevated radials ; antenna system is connected to a jaw mount, so I always try to have that table, or pole, or smaller tree branch able to take that jaw. I prefer the versatility of the FT897D though, being able to get to 100W but usually am on 25 to 30W whilst portable and a LiFePo battery (8.4A).
Sounds like a great setup! That would make for a very efficient vertical setup too: elevated radials plus resonance with a tapped coil? Photos, please! Seriously: consider sending me some photos of it deployed along with a description. I'd love to post it on QRPer.com. You can email me at my callsign at QRPer.com. 73 Thomas K4SWL
Hi Thomas, did not yet take pictures, but I sure will do next time, actually that's a great idea! I'll record your request on a to-do list to not forget about it. Just subscribed to your channel, congratulations ! 73, chris ha7wx PS: wow you lived a while in France in Grenoble ? I am French actually despite my call-sign. If you need any info in French, feel free to drop me an email at chris dot qc dot ca at g m a i l c o m.
Hello Thomas. Very nice video. I like also very much working portable and especially SOTA. Owning KX2 which was doing great job on SOTA activiations on Reunion Island and it is still my favourite pick for holidays.
Now I see the difference in packed size of the Mil Whip 2.0. I have the full 1.0 setup that I just keep finding more uses for and recently started playing with it in a /P configuration. I tested it out in the QRP To The Field event last weekend (well, the weekend before last). I have a bracket for my hiking pole to elevate the Mil Whip which helps a bit. You and I share the same mantra on activation too, go with the antenna that gets you on the air to make your contacts and have fun. It’s my hope to work a bunch more SOTA summits this year with the CHA setup. If I can setup, make my 4 contacts, and break down in 30 minutes, I can bring my gear along on hikes with my wife (she has no patience on a summit for me with radio gear). And I’ve not listened to much CW on 705 videos (your first one last year was the only one I watched and heard) this isn’t clicky/klacky at all. I’m still sticking with my KX2 for /p, KX1 for my bicycle, and my KX3 in the shack (or when RV camping where I know I can deploy a decent sized wire antenna). de W1ND
Thank you for the feedback. You've got an excellent line-up of rigs for operating in the field! You're reminding me that I need to take the KX1 out again soon. I love that little radio. Cheers, Thomas K4SWL
I think the vertical antennas are great when you're trying to get that low angle for the DX, and I think the Italy contact shows some evidence of that. Probably a better option when you have more power. I find the wire antennas in a dipole, inverted V end fed, etc. seem to do better for the stateside contacts. Again, great content.
Greetings from the UK :-) . My radio comes tomorrow - a Yaesu 450D second hand from a reputable dealer (I got fed up waiting to save up for something new !). Take me a day or two to install everything and then I will be up and running (only 10 watts with my Foundation licence). Hope to catch up with you on the airways one day. 73 M7 BLC
Something I experienced with the MAT 705+ was that it wouldn't turn on during a SOTA attempt with the temps on the mid 20 - low 30 at the summit with 10 to 20 mph potentially bringing the windshield much lower. The tuner had been recharged the day prior to the trip and was working the morning of the attempt. My guess is that the electronics got way to cold on my pack during the climb up the mountain. The tuner worked flawless once back to the house without being recharged or anything special. Thoughts?
Wow! That's discouraging. I have used the mAT-705 Plus in temps as low as 25F and mild winds with no problems. It's possible though, that in those cases, I had the ATU in my car prior to the activation--thus is might have been pretty warm from the get-go. I may have to test this by putting the ATU in the freezer and then trying to run it. Only other thing I can think of is that perhaps the internal batteries became slightly dislodged during your hike? It has happened to units while in the hands of parcel delivery services. I hope you had a back-up or there was enough resonance to complete the activation.
@@ThomasK4SWL Unfortunately it was a failed activation. I had a resonant antenna with me and a HT to try and salvage the activation with simplex but even with all those back ups I failed to activate. We had a small window with the weather and it closed on us much faster we anticipated. I jumped on 4 different repeaters once we got our shelter up to try and get folks to jump on simplex with no luck. I checked battery placement once back at the house and everything was in place. I was on top of Calloway Peak in GrandFather mountain state park. I guess I will have to put it to the test one more time to reconfirm. Thanks for the videos and motivation the learn CW. stay safe-ish! KN4HZV
@@jlowknight Hmmm...I will use your note as a cautionary one. I will test my Mat-705 Plus by placing it int he freezer (or, heck, outside) for a while giving it time to get cold and try it. That would be very disappointing if the low temp range is so modest. Thanks for the report! Thomas K4SWL
@@ThomasK4SWL Not proud of my fail activation but I rather share what I experienced with the hopes others can keep an eye on it and reconfirmed or have a plan for just in case it happens to them. It cost me valuable time at the summit trying to get it to work ( never did ). Our hike took roughly 5 hours, that is how long the Tuner was exposed to the low temps prior to the attempt of activation.
Please use proper spacing and send the "K" - if you don't, many of us won't answer you because we aren't sure if you are done sending! Also, it makes one look like a newbie - and nobody wants that!! I've been a cw op for 40 years (I started pretty young) - proper use of the prosigns is just as important as sending your callsign. Nice video - and a good demo of your Icom 👍!
Thanks for your comment. That's a very good point. I suppose I am very much a newbie (hi hi!) and follow the convention used in POTA CQs and exchanges. It's true that in CQs I don't use a trailing K (although I try to do proper spacing). I'm guessing that only 10% of POTA activators use a trailing K. I can tell you that only 1 in 20 POTA hunters use a K and when they do they often don't leave enough space and I think the K is a part of their callsign (esp. problematic with 1x2, 2x1, and 2x2 calls). Between exchanges I try to use "BK" and end with a dit dit. At the end of the day, I'm following the convention for POTA and SOTA, not general CQ calls. When I do a general CQ call, I do use trailing Ks.
@@ThomasK4SWL Well, the "K" worked well enough for over a century. I'm pretty sure the CW ops of the past knew what they were doing. If I hear a station not sending a K, I would probably have to hear his call a few times to see if he's just testing, or in a qso, or just not finished sending. "K" is the same as saying "over" on SSB. Do you just stop speaking at the end of a sentence on sideband? Seems nobody does that... I often read comments from other experienced ops who question why newer (?) CW ops aren't making proper use of prosigns, using poor spacing, tuning up on top of an activation, etc. If you call CQ and don't end with a K, how will others know when to reply? Send "K" after the CQ, and "KN" during an exchange. Morse code is all about proper timing and spacing - properly sending the K should be a non-issue (it's expected, actually). Perhaps you can be the good example to other POTA ops. I'm a pretty active SOTA op, and I don't think I ever hear anyone not sending K after the CQ - there is no special SOTA convention to disregard prosigns - in fact, with the short SOTA exchanges, proper use of them is perhaps even more important. Good luck with your portable ops - I'm sure I'll work you sometime soon. 👍
Love your vids, just subscribed. I have the original MPAS with the mil whip and extension. I read somewhere that the original whip may have continuity issues. I put a meter on each section of the thicker extension and got great continuity but with the narrow mil whip, not good. I couldn't get end to end continuity when it was together and had a hard time getting consistent continuity of the individual sections. While I've used it fairly successfully in the past, I'm hesitant now. Instead, I use a stainless steel telescopic whip like I've seen in your other video. Warm regards.
This was great. You are closer to me on the CW experience. It was great watching you use the 705 to handle the QSO and copy the logs. I noticed you didn't not the signal report. Are you assuing when its just the call its 599?
Thank you, Josh. So signal reports are a funny thing in POTA: you give them in the exchange--along with the state and/or park number in SSB--but the POTA logging system completely omits them at present. In fact, the POTA logging system really only looks at both callsigns, meter band, mode, time, and the two Sig_Info fields for park and P2P verification. That's it. At home, when I'm chasing POTA or SOTA stations, I note much more info: the signal reports both ways, power output, and frequency. As an activator, though, I omit everything that the POTA system doesn't use. It saves a lot of time and eases workflow in the field. There are exceptions: if I (accidentally!) snag some desired DX, I'll note more info in the logs because that will transfer to my main ACLog file back home.
Just keep plugging away at it. You'll reach a point where your brain simply hears the characters instead of the dits and dashes. You might also check out the Long Island CW Club--they're a wonderful group to help develop your CW skills!
Great video. Just a heads up, the wire you hooked up to the transformer is not the counterpoise. That wire is used as a separate antenna(sloper, inverted L, etc). There should be a second shorter wire on another winder with the MPAS 2.0. 73
Yes, that's correct. I use that one as a counterpoise, though, because I only want to carry one extra wire with me and occasionally set it up as a random wire (without counterpoise, but with ample coax). Cheers, Thomas K4SWL
I like that antenna, but dang that's 1/2 the cost of a stripped down KX3. 53:20 The Radio Prepper is French (he lived in the U.S. for awhile). He could help with the radio terminology. He's done videos in the past in both in English and French
Yeah, I love Gil's channel and have watched his videos in English and French. I actually reached out to him a couple weeks ago asking for translations but haven't heard back yet. Like me, I kno he's been super busy. Yes, very true about the CHA price as well. For what it's worth, though, it's one of the few antennas I've ever met that I thought I might pass on to my kids in the will. :) Cheers, Thomas
What is the keyer that you are using? I just received my IC-705 last night and am trying to get it set up and get used to it. I am having fun with it on D-Star today but I want to start taking it out to activate parks with soon which was the purpose of buying it. I am just starting to (or attempting to try to) learn CW, and the only Meyer I have is a big heavy MFJ-422D which is powered by a 9v battery so that I can practice without being on the air with it, but I wouldn’t want to try to carry that out in the field. A lightweight plastic one would be a lot easier, and make me feel better about taking it out of my shack.
So there's a link the video description to my full field report on QRPer.com. In that field report, I'll have a link to this exact key. I can tell you that it's a CW More Pocket paddle. I highly recommend! And good on you for learning CW! You can do it! Cheers, Thomas (K4SWL)
Great video as always! Is the MPAS 2.0 light enough for SOTA? I got a super MP1 to eliminate having a tuner although a Elecraft T1 is in the mail as we speak.
whats the brand/model of the patch cable between the tuner and the radio? I know you mentioned it but I've gone back and try to see it again but no luck. thanks!
It's an ABR Industries cable and I highly recommend it. Here's the article you probably saw and I point to the two sizes I use the most: qrper.com/2021/01/the-importance-of-quality-cable-and-connectors/
I came very close to buying one of those. I can't tell how much weight it would add and I sort of wish there was a bit more protection on the back. With that said, the back of the IC-705 is more rugged than the front so it may be unnecessary.
We used to live in a village called Shere in Surrey. We loved living there (although the cost of living in that park of England was scary!). We plan to spend a full summer in the UK in 2022 or 2023. We really miss living there.
It would be great to see some videos of you getting the wire in the tree. With the Chamaeleon, do you hoist it up by the isolator to create the V or do you throw the entire wire over the branch?
Hi, Dave, I do plan to show how I deploy my wire antennas soon. To answer your question about the Chameleon Emcomm III wire antenna: Yes. :) I do both. I've used the isolator to create a V, but I find it can be tricky to deploy on my own and, especially, if I'm in a dense forest. Sometimes the little isolator will twist if there isn't tension on both sides as I deploy it. Most of the time, I simply use a tree branch as the apex of the V and that also works. Perhaps not *quite* as efficient, but in practice it makes little difference. Cheers, Thomas
That's a 3Ah battery. I should think it would keep the IC-705 at 10 watts for 3 hours of continuous operation? Possibly more. I'm not sure because I typically run it only at 5 watts even when hooked up to an external battery.
I have not, but I would love to. In fact, I've been searching for a used MONKA version of the mcHF or even a local friend who could loan me one. There's a backlog on new ones at present and I think there may even be a new version in the works. I've been avoiding the Chinese clone ones because I like supporting original designers and manufacturers (M0NKA in this case) of gear.
Would this be enough radio to talk to people across the ocean ? I know it’s only what 5 watts. I’m Texas and would like talk across ocean and I really like the small size .
Another good one Thomas. I've ordered my paddles like yours direct from CW morse. Look forward to using it. What camera did you get for your YT videos? It looks really good.
I got a refurbished Google Pixel 3. I read a number of reviews that tout its camera and battery life. I love it so far. The battery life is *much* better than most action cameras and the video quality just as good if not better in low light. Plus, I can upload directly from the device which isn't as easy to do with cameras. Loving it so far, but I need to get used to the microphone pattern.
Is 5-10 watts enough? I cant decide which transceiver to get as my first, and I wonder if I will have fear of missing out of a 100watt setup. I want to do voice and try some digital stuff, not really CW.
If planning to do voice, I would suggest you go for a 10 watt radio. 5 watts will certainly work for SOTA and POTA--you'll get your activations completed--but I've always felt 10 watts was a proper SSB QRP amount. There's nothing wrong with going for a 100 watt radio either. I would simply suggest you get one that's easy to take to the field. They will require a larger battery than QRP radio even if only operating low power. Also, you'll likely need a good in-line RF choke for end fed antennas.
@@ThomasK4SWL I can bring a small 12v lithium battery along with the 705 to get it up to 10 watts if the 5 added watts will make much difference? I'm still torn between a 7300 and 705. I'm mostly operating from home, but the technology availaible suggests I can hold out for a higher power mobile rig to have maximum flexibility. I also wonder if icom will release an upgrade to the 705 soon. Do they release new products very often?
@@anonymous_friend I think 10 watts over 5 watts really helps in SSB, much less so in CW. You're not alone in trying to decide between these two radios. If you're planning few field trips with the radio, then you might consider the IC-7300. If doing POTA, SOTA, WWFF etc. then I'd go for the '705.
Thomas, what is that custom orange prop piece you use under the IC705 that screws into the mounting threads? It looks like it props it perfectly, I need one for my 705. Thanks
Thank you for this. Being new to all this and not yet beginning to learn CW, listening to you, I can actually hear the proper spacing between letters and words. I have high frequency hearing loss but your code comes through very clearly. My question is about your antenna. Are you only using the one Counterpoise provided and is your antenna still Omnidirectional or does it favor the direction of the counterpoise? I'm still playing with my 705 but I'm using the Comet HFJ 350M whip antenna that is actually surprising me with it's performance. My only issue is trying to understand the set-up better so I can have more consistency in its performance, especially the Omnidirectional piece. Thanks in advance for your help. Ciao Walter
Hi, Walter, Great question! Sadly, I have no idea if the counterpoise placement has a huge impact on signal direction. I must assume it does have some impact, though. I might reach out to Chameleon and ask since I'm sure they've run an analysis. Being a vertical, I'm sure it's mostly omni-directional. And, yes, I only use the one counterpoise with it. It, and other verticals, would benefit from a larger counterpoise system, but it's just overkill for POTA activations. Ciao! Thomas
I just realized I've watched this before and didn't post any comment? shame on me. so the one question I have for you today Tom, is have you ever noticed a change in SWR because of the "Coax being Coiled up in a bunch? as you did here? when you hooked it up to the vertical.? I know the tuner did its job but wonder if you have experienced that at any time with any installation? thanks again for another great presentaions/activation. de EllisWA1RKS
Since this video, I've stopped coiling my cable, because you're right: I know that has a negative effect. Carl at Chameleon even pointed that out. :) Thank you, sir, for the kind comment! Cheers & 73, Thomas
Hi Tom, I was in contact with a Scottish Ham this afternoon and mentioned that I was waiting for my MPAS 2.0 to arrive, and he told me that he also has this Antenna and advised not to use in wet weather as this will cause a problem with the cords that join the extension whip together! Any thoughts on this? You would expect that an Antenna of this cost and the fact that it is military grade should be able to be used in all weather conditions!!
Hi, Alex, I would consult Chameleon directly. It's funny you bring this up, because I've had an article in my drafts folder of QRPer.com for the better part of a week entitled, "Portable HF antennas generally don’t like wet weather." I can't imagine that being in the rain a bit would damage the CHA MPAS 2.0. Perhaps if permanently installed? Thing is, most portable antennas assume you'll be operating in reasonable weather or if in the rain, no longer than a day or two. Most portable antennas have no protection for the RF ports. Those would have to be sealed as well. I would reach out to Chameleon, though, and confirm.
@@ThomasK4SWL Tom, when I get mine I'll see what it says in the instructions, I'm sure it's not a case of you can only use when the sun is shining ,if that's the case no good for the UK!! I think you may have to use a special conducting compound on the joints, but as you say mabe not to use for a permanent base Antenna. I know its classed as military grade and I'm not sure how much its used by the military, but it would be ridiculous if they couldn't use it in the rain. One to keep an open mind about. Take care you never know we may have a qso with 705 and MPAS, that would be really cool!
From page 3 of the MPAS 2.0 Manual. "The CHA MPAS 2.0 is configurable to facilitate Near-Vertical Incident Sky wave (NVIS)communication and is totally waterproof." On the chameleon site. "IT'S IMPORTANT TO WATERPROOF THE CHA MIL EXT 2.0 BEFORE PERMANENT INSTALLATION Use the Ideal NOALOX 4 oz. Anti-Oxidant Compound to improve the efficiency of aluminum conductor connections. This compound provides additional inner-strand and inner-conductor current paths." I got mine in May 2020 and because it performed well above expectation, for instance, regular contacts to South America on 20m from Ireland with the FT-891 100w I decided to leave it up permanently on the front lawn. I inspected it yesterday and after an Irish wet and windy winter the antenna is in perfect shape, I used Noalox on the Aluminium section which is essential and I was able to take each section apart with no issues, if you don't use the Noalox you risk the aluminium sections seizing together and I will put more on before the next Winter. What it would be like after 5 years is anyone's guess but so far so good, I actually use it as my sitting room setup with a wire EFHW 49:1 for more local coverage and 80m. What the Wire doesn't hear DX wise I can clearly hear on the MPAS 2.0, it makes a really excellent SWL Antenna too. Very very happy with it for a portable antenna it's really good. I also have the CAP HAT and use only single counterpoise that was supplied. I can get away with no tuner on some bands too. Obviously 80 and 160 meter performance will be well down but that's what the supplied wire is for, could even get another Hybrid micro and antenna switch for that 80 and 160m. www.manualslib.com/manual/1607811/Chameleon-Antenna-Cha-Mpas-2-0.html?page=3#manual
very good to lsn me haha...but not only antenna load you..probable good street for italy..congrats for the video and see you on air again ..now i have rotor damage uff :( ciao 73 and GL on pota Raf, ik4idf
Another interesting video Thomas. You have a relaxed style which i like. Regarding your kit, I have just acquired a 705 -- but the MPAS 2.0 is wayyyy too expensive in the UK -- around $850! No portable vertical is worth that much -- so I will stick with EFHW antennas and my 7m pole -- total cost around $40. :-) 73 Bruce G4ABX
You know what, Bruce? That EFHW with a 7M pole will serve you very, very well! I agree: $850 is *way* too much to pay for a vertical even if it's wonderful. Frankly, in terms of portable performance? It's awfully hard to beat an EFHF. Can you please tell me what you're using as a pole and support? Cheers, Thomas K4SWL / M0CYI
@@ThomasK4SWL Morning Thomas. We have a great supplier of SOTA kit here in the UK called SOTABEAMS. I've been using their kit for probably the last 20 years. Their 7m pole (Fibreglass, fishing pole) is about $27 and mine is more than 10 years old. Lightweight and robust. My EFHW antennas are all home brew using components from SOTABEAMS. 73 Bruce G4ABX
Hey Thomas, great video. I'm very excited about getting back on the air after a ~15 year break. It's one of the benefits of retirement. :) I was an active CW operator for ~20 years. I got my Novice license back in 1974 at age 13. I'm replicating your equipment choice. What keyer are you using? I had planned on using one of my now ancient transceivers (IC-735 and a Heathkit SB-102), but they both need alignment/calibration and I couldn't find anyone who does that for those rigs. I guess I will donate them to the local club here in Greensboro. Hopefully, someone will make use of them. Thanks and 73s Bob Steele W4EGJ
Hi, Bob, Before I forget, you might reach out to Vlado (N3CZ) as he may be able to do the alignment for you. He lives here in Asheville. His website is hamradio.repair My key is a CW Morse Pocket Paddles: cwmorse.us/product-category/pocket-paddles/ Welcome back to the wide world of amateur radio! :) Cheers, Thomas K4SWL
So I rarely look up the actual grid when I go to a park. I probably should since, on occasion, I've been asked by hunters in QSL cards. The tool I typically use is the Grid Mapper on QRZ: www.qrz.com/gridmapper You need to know either the GPS coordinates or you'll need to physically move the map to find the site--that's the only issue. It can take a bit of research.
I really enjoy watching your videos, really informative for this wannabe POTA operator. Your videos have inspired me to take CW online classes via LICW Club, only at 13 characters at the moment and I admire those ops that can send and decode so quickly. Hoping I will get there in due time. I'm slowly collecting gear and the CHA MPas 2.0 is on my wish list, seems so easy to set up. I notice some rings on the counterpoise wire, is that so you can deploy the wire in different configurations, eg. inverted V dipole? Keep up the wonderful "live and raw" footage, which make your videos special to me. 73 de KI7UXT
Hi, Kell, You will certainly make your goal of operating CW in POTA! Well done and I've heard so many good things about the LICW Club. Yes, the rings on the counterpoised are there so that you can actually deploy the counterpoised in an elevated position or even as a random wire antenna! I'll often use the floating ring to form an inverted V shape. Cheers, Thomas K4SWL
Man Utah. That’s sweet. PS: Italy! So you bought the 705? I know you had mentioned prior that you were reviewing it. I figured it was a loaner or maybe it was and you just bought it.
Yes, I purchased it for the review and had planned on selling it after. I was too impatient to wait for a loaner from Icom--they had planned to send me one, but it might have taken a few months. Obviously, I hae no intention of selling the IC-705 now. It's a keeper!
@@ThomasK4SWL Nice. And not that anybody cares but I called Elecraft yesterday and I’m 5th in the que for my Kx3 pack assembly. If the suppliers come through. Speaking of being impatient. Lol.
Thanks for this video! This really looks like something I'd like to try. Perhaps I'll start some planning and get some of the parks in my area on the air! 73 de Doug VA7LM
First of all, thank you. :) Maybe try this link? www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=TGGFP2XVZDPP2 It's possible a browser plugin might be stopping the button from executing the script (but that's a total guess on my part). :) Again thank you for even considering this, Bob.
Hi Tom, I enjoy watching your vids, but especially this one as have the 705 and am waiting for the MPAS 2.0 to arrive from Nevada any day now, no expense spared when it comes to Ham radio!! Don't tell the xyl... I don't do cw so hats off to you for your skills. Enjoy the radio, and no edits is best! 73 Alex M0KVA. PS How did you end up with a M0 call..
Hi, Alex, You'll love the IC-705 and MPAS 2.0 combo and find that most external ATUs will achieve excellent matches. The MPAS 2.0 quality is second to none. So I lived in Shere (Surrey) for several years in the early 2000s. I worked as an application developer for Corning. When I travel to the UK, I can still use my old call now that callsigns are lifetime! Cheers & 73 Thomas K4SWL / M0CYI
Ok Thomas! Another good pedagogical illustrating video! It seems You've found the ICOM IC-705 and it's "extras" through the different finesses of its menus. Tip: Why NOT test FT4 o JS8 CALL (xor PSK31/63)? That radio can run whatever You wish and AT astonishing distances! Have Fun Thomas! "Hals und Beinbruch"! 73s de Gunnar sm6oer >>\
Thank you, Gunnar! Yes, indeed! I plan to run a little FT8/FT4 someday for sure. I have done this from the QTH with the IC-705. It's so easy to do. Cheers, Thomas K4SWL
That antenna setup looks a lot like a combination of the clansman antennas, groundspike and mast. The top bit folds just like the clansman HF whip, but without the spring coil. I think you would have been better off with a say, three shorter counterpoises rather one really long one, unless you are making it into a ground loop. maybe you can try one of these? www.kk5jy.net/LoG/
More counterpoises would certainly help this setup and, in fact, elevated counterpoises might even be ideal. Truth is, though, for POTA it's just a bit of overkill if it takes much longer to deploy and pack up. It's often so easy to make contacts, I don't bother with making the antenna more efficient. I do have a 20M vertical with 6 counterpoise wires. It's brilliant! It's very quick to deploy, but a real pain to pack up later. :) I've never tried a LoG mainly because RFI is so rarely an issue in remote parks, game lands, and WMAs. Thank you, though, I'll check out the link!
I do have stalkers. Only once has a sherriff been called. In hickman county, TN.( Un ja! haben ze paper vvork) one person accused me of beeing a spy so I spoke my pour German for a tease. That did it. Hi hi😂 kv4li 73. Well for Cheep! a piece of paneling cut to shape. ( That is to Mach the dials to hold it in place) would be just fine for transit. Do this with my 330, 660, and 506. Ps I use a pixie w/40 meter Xciver and a long wire. Kinda swl/cw set up. And a fist full of xtals. Even to include ssb freqs. Tks Fer good show. "Rem: voyager#1, #2. Are qrp. And cover millions of miles. De kv4li.
“Sorry for the lack of audio"
We're just grateful you pulled your shirt down first 😉
Excellent video as always, thank you. 🙂
Ha ha ha!!!!
Great walk around the rig during a real QSO, with thoughtful commentary while using it. (I hate channels that push and shove an opinion or try to sell me on something) Licensed since '71 and I've gone through more radios than most people will ever see and the last thing I want is a salesman. First saw your vid 4 months ago and bought the 705 based solely on seeing how much you love operating it. It's a keeper, thanks.
Thank you so much for your comments.
Appreciate seeing this set up. This is exactly the antenna, tuner and radio I am working toward.
Same here, I have been looking at the 705 and MPAS for a while, great combination, but also interested in trying a mag loop.
I enjoy the longer real time videos, keep 'em coming
Will do!
"The more I use the Icom 705, the more I love it" - YES, same here!
Thank you for showing the antenna setup. So many RUclips hams leave it out and it is such a critical step/information.
You're most welcome. I try to do this at least once with each antenna. Since I've limited bandwidth to upload videos, I don't normally include it in each, but I do when I can.
Some of your videos I watched twice or even more. Thank you, Tom!
I liked the audio, sounded really crisp and gave some good atmosphere.
Thank you. As you can tell, I'm a serious novice at this video stuff. :)
Love your Broadcast radio voice
50:00 Love you video it is good to see the Icom IC-705 in action and what it can do. I think this is the radio I will eventually get but not at the current prices. I'm from the UK and we haven't had any rain for about a month now it is very hot and sunny. I hear similar reports from people in Germany.
It's nice that you make such long videos. Your fieldday is playing in the background all day long :)
Great video. Expected no less. Hi Hi
As much as I am a advocator of using resonant antennas, I have to say, "I am impressed with the non resonant vertical antenna you just set up." Super easy, super fast to erect and no tie points needed to erect it. Pretty slick.
I pretty much go to the same park and right under the eve of the pavilion I screwed a tiny brass hook bolt. I mostly use a HWEF40. I attach the UnUn to it and string the wire to a tree about 75 feet away. Simple setup, NVIS but it works and no tuner needed.
Looking forward to your next video. You've given so many people some good ideas. Hopefully your sharing gets more people active.
Barry, KU3X/QRP
Thank you so much, Barry! And thanks for sharing your experience. 73 de K4SWL
Watched the whole thing - an hour well spent! :)
Thank you! :) Extra points for staying awake!
Thanks again! I am definitely one who is inspired to work on my CW copying after watching your vids! 73!
It’s a good thing Chameleon let you hang onto the MPAS 2.0 as long as they have. I just bought one based on what I saw in this video.
You mentioned learning CW is not like learning another language. I agree. For me, it's more like learning to type. At first, you're learning where the alphabet, numbers, and punctuation are located. Then you learn to recognize letters and numbers faster. Eventually you can type entire words without looking. Same goes for CW. It's already your language and alphabet. The brain still has to move beyond analyzing and reassembling letters into words (or vice-versa).
Exactly!
Beautiful area, I miss the northern states. Reminds me up upstate NY.
Thanks for the video. I especially enjoyed 51:14 😀👍 Mel, K2JWD
Glad you enjoyed it and thanks for working my station that day! Great to have you in the logs! Cheers, Thomas K4SWL
Congrats on Italy!
I know! 5 watts an a stick, right? :)
Yeah I see a POTA video, I watch it. I like it, I thumbs up the video.
We like the content. Please continue making it. Will be starting CW Pota soon!
Excellent! You can do it! CW activations are so much fun.
MPAS 2.0 is a great antenna, super fast to set up and it works so well I decided to leave it up all winter here in Ireland and checked it yesterday and it's as new despite all the wind and rain. I use Noalox, this is essential for the aluminium section and it states this in the manual.
On 20m last Summer I made regular contacts from Ireland to South America even as far as Chile with the FT-891 and 100w, single supplied counterpoise and CAP HAT which makes it more broadband, I can work a few bands without a tuner.
It's a portable antenna I got to work only portable but now I will take it down only for portable use which is good because it gets a lot more use than I had intended so I get more for my money :-)
Brilliant!
Very nice video and beautiful location choice!
Thank you very much!
This was a really great watch. Cheers!
I’m quite a bit rusty on my CW. At one time my CW speed was some where between 13 and 20 WPM but that was a very very long time ago. Back in the late 1980’s CW required to get an amateur radio license. I studied CW using the Farnsworth method
I set my character speed at a very high rate ( 30-35 WPM) and started the word rate at 5 WPM. Over time I would increase the WPM rate towards 20-25 WPM.
One thing I found using the Farnsworth method, that as I increase the word speed I started to hear words instead of characters which made it easier to copy and write down.
thanks for the video, just bought the 705 and mat plus yesterday and yet to use the tuner...
Hope you enjoy it!
@@ThomasK4SWL so far YES YES... not good weather here in the UK for anything outside (hurry up summer) but some FT8 works well from indoors.... 73:-)
Thanks for the great video! I think you also gave me a clue about my ancestors from NC. My granddad was born in 1899 very near the state park you activated and was named Zebulon Vance Owen. I have to believe that his name was derived from a local idol, Zebulon Baird Vance, who became one of NC's governors (the 43rd). Thanks for the activation and the interesting location. 73, KK7PO
Oh wow! Yes, the Vance name is a big one in terms of NC history. The birthplace site is a wonderful little park, too. I've never actually been inside the visitor's center because it's always closed on the days I'm there. Next time you're in the are, you need to put that site on the air! Your grandad will be with you there in spirit. Cheers, Thomas K4SWL
Thanks for the great videos and phone and cw. I have good luck with a 40 meter dipole... easy to make and load. 73 and look forward to next time.
Dipoles are some of the most efficient antennas you can deploy! Yes, a great choice!
Thanks for a great video ….73’s
I have the same set of antenna (1 military whip like yours and the CHA extending whip), but I use a coil with an aligator clip for tuning and elevated radials ; antenna system is connected to a jaw mount, so I always try to have that table, or pole, or smaller tree branch able to take that jaw.
I prefer the versatility of the FT897D though, being able to get to 100W but usually am on 25 to 30W whilst portable and a LiFePo battery (8.4A).
Sounds like a great setup! That would make for a very efficient vertical setup too: elevated radials plus resonance with a tapped coil? Photos, please! Seriously: consider sending me some photos of it deployed along with a description. I'd love to post it on QRPer.com. You can email me at my callsign at QRPer.com. 73 Thomas K4SWL
Hi Thomas, did not yet take pictures, but I sure will do next time, actually that's a great idea!
I'll record your request on a to-do list to not forget about it.
Just subscribed to your channel, congratulations ! 73, chris ha7wx
PS: wow you lived a while in France in Grenoble ? I am French actually despite my call-sign. If you need any info in French, feel free to drop me an email at chris dot qc dot ca at g m a i l c o m.
Tom, did you ever get the pictures of the setup and post it on your website? If so please provide a link to the pics. Thanks
Hello Thomas. Very nice video. I like also very much working portable and especially SOTA.
Owning KX2 which was doing great job on SOTA activiations on Reunion Island and it is still my favourite pick for holidays.
Now I see the difference in packed size of the Mil Whip 2.0. I have the full 1.0 setup that I just keep finding more uses for and recently started playing with it in a /P configuration. I tested it out in the QRP To The Field event last weekend (well, the weekend before last). I have a bracket for my hiking pole to elevate the Mil Whip which helps a bit.
You and I share the same mantra on activation too, go with the antenna that gets you on the air to make your contacts and have fun. It’s my hope to work a bunch more SOTA summits this year with the CHA setup. If I can setup, make my 4 contacts, and break down in 30 minutes, I can bring my gear along on hikes with my wife (she has no patience on a summit for me with radio gear).
And I’ve not listened to much CW on 705 videos (your first one last year was the only one I watched and heard) this isn’t clicky/klacky at all.
I’m still sticking with my KX2 for /p, KX1 for my bicycle, and my KX3 in the shack (or when RV camping where I know I can deploy a decent sized wire antenna).
de W1ND
Thank you for the feedback. You've got an excellent line-up of rigs for operating in the field! You're reminding me that I need to take the KX1 out again soon. I love that little radio.
Cheers,
Thomas
K4SWL
I think the vertical antennas are great when you're trying to get that low angle for the DX, and I think the Italy contact shows some evidence of that. Probably a better option when you have more power. I find the wire antennas in a dipole, inverted V end fed, etc. seem to do better for the stateside contacts. Again, great content.
Thank you, Kent!
Zebulon is such a cool name. I wish my parents had been hippies in the 70s.
:)
Yes your videos are very helpful to my cw. Schooling 73 de Karl KE3KWE Arizona
So happy to hear that, Karl!
Greetings from the UK :-) . My radio comes tomorrow - a Yaesu 450D second hand from a reputable dealer (I got fed up waiting to save up for something new !). Take me a day or two to install everything and then I will be up and running (only 10 watts with my Foundation licence). Hope to catch up with you on the airways one day. 73 M7 BLC
Congrats on the new-to-you rig, John! Yes, it would be fantastic to catch up with you on the air someday soon! 73 de Thomas K4SWL / M0CYI
Something I experienced with the MAT 705+ was that it wouldn't turn on during a SOTA attempt with the temps on the mid 20 - low 30 at the summit with 10 to 20 mph potentially bringing the windshield much lower. The tuner had been recharged the day prior to the trip and was working the morning of the attempt. My guess is that the electronics got way to cold on my pack during the climb up the mountain. The tuner worked flawless once back to the house without being recharged or anything special. Thoughts?
Wow! That's discouraging. I have used the mAT-705 Plus in temps as low as 25F and mild winds with no problems. It's possible though, that in those cases, I had the ATU in my car prior to the activation--thus is might have been pretty warm from the get-go. I may have to test this by putting the ATU in the freezer and then trying to run it. Only other thing I can think of is that perhaps the internal batteries became slightly dislodged during your hike? It has happened to units while in the hands of parcel delivery services. I hope you had a back-up or there was enough resonance to complete the activation.
@@ThomasK4SWL Unfortunately it was a failed activation. I had a resonant antenna with me and a HT to try and salvage the activation with simplex but even with all those back ups I failed to activate. We had a small window with the weather and it closed on us much faster we anticipated. I jumped on 4 different repeaters once we got our shelter up to try and get folks to jump on simplex with no luck. I checked battery placement once back at the house and everything was in place. I was on top of Calloway Peak in GrandFather mountain state park. I guess I will have to put it to the test one more time to reconfirm. Thanks for the videos and motivation the learn CW. stay safe-ish! KN4HZV
@@jlowknight Hmmm...I will use your note as a cautionary one. I will test my Mat-705 Plus by placing it int he freezer (or, heck, outside) for a while giving it time to get cold and try it. That would be very disappointing if the low temp range is so modest. Thanks for the report! Thomas K4SWL
@@ThomasK4SWL Not proud of my fail activation but I rather share what I experienced with the hopes others can keep an eye on it and reconfirmed or have a plan for just in case it happens to them. It cost me valuable time at the summit trying to get it to work ( never did ). Our hike took roughly 5 hours, that is how long the Tuner was exposed to the low temps prior to the attempt of activation.
@@jlowknight A bad at with the radio still beats a good day at work!
Please use proper spacing and send the "K" - if you don't, many of us won't answer you because we aren't sure if you are done sending! Also, it makes one look like a newbie - and nobody wants that!! I've been a cw op for 40 years (I started pretty young) - proper use of the prosigns is just as important as sending your callsign. Nice video - and a good demo of your Icom 👍!
CW guy. I am a new CW operator what do you use at the end of a QSO? I have been told to use “AR.”
Thanks for your comment. That's a very good point. I suppose I am very much a newbie (hi hi!) and follow the convention used in POTA CQs and exchanges. It's true that in CQs I don't use a trailing K (although I try to do proper spacing). I'm guessing that only 10% of POTA activators use a trailing K. I can tell you that only 1 in 20 POTA hunters use a K and when they do they often don't leave enough space and I think the K is a part of their callsign (esp. problematic with 1x2, 2x1, and 2x2 calls). Between exchanges I try to use "BK" and end with a dit dit. At the end of the day, I'm following the convention for POTA and SOTA, not general CQ calls. When I do a general CQ call, I do use trailing Ks.
@@ThomasK4SWL Well, the "K" worked well enough for over a century. I'm pretty sure the CW ops of the past knew what they were doing. If I hear a station not sending a K, I would probably have to hear his call a few times to see if he's just testing, or in a qso, or just not finished sending. "K" is the same as saying "over" on SSB. Do you just stop speaking at the end of a sentence on sideband? Seems nobody does that... I often read comments from other experienced ops who question why newer (?) CW ops aren't making proper use of prosigns, using poor spacing, tuning up on top of an activation, etc. If you call CQ and don't end with a K, how will others know when to reply? Send "K" after the CQ, and "KN" during an exchange. Morse code is all about proper timing and spacing - properly sending the K should be a non-issue (it's expected, actually). Perhaps you can be the good example to other POTA ops. I'm a pretty active SOTA op, and I don't think I ever hear anyone not sending K after the CQ - there is no special SOTA convention to disregard prosigns - in fact, with the short SOTA exchanges, proper use of them is perhaps even more important. Good luck with your portable ops - I'm sure I'll work you sometime soon. 👍
Thomas, I could be wrong, but I think there is a QSO recorder built in.
There is! The IC-705 built-in recorder is amazing!
Good video. What brand of keyer are you using here?
Thank you! I'm using a CW Morse Pocket Paddle: cwmorse.us/product-category/pocket-paddles/
Love your vids, just subscribed. I have the original MPAS with the mil whip and extension. I read somewhere that the original whip may have continuity issues. I put a meter on each section of the thicker extension and got great continuity but with the narrow mil whip, not good. I couldn't get end to end continuity when it was together and had a hard time getting consistent continuity of the individual sections. While I've used it fairly successfully in the past, I'm hesitant now. Instead, I use a stainless steel telescopic whip like I've seen in your other video. Warm regards.
Interesting. I've never checked the MPAS 2.0 whip for continuity. Might try that. It's always served me well.
@@ThomasK4SWL It might be worth mentioning that mine was the original MPAS whip. I heard that the 2.0 may have been improved? Slap a meter on it.
This was great. You are closer to me on the CW experience. It was great watching you use the 705 to handle the QSO and copy the logs. I noticed you didn't not the signal report. Are you assuing when its just the call its 599?
you dont need signal reports for POTA logs.
Thank you, Josh. So signal reports are a funny thing in POTA: you give them in the exchange--along with the state and/or park number in SSB--but the POTA logging system completely omits them at present.
In fact, the POTA logging system really only looks at both callsigns, meter band, mode, time, and the two Sig_Info fields for park and P2P verification. That's it.
At home, when I'm chasing POTA or SOTA stations, I note much more info: the signal reports both ways, power output, and frequency.
As an activator, though, I omit everything that the POTA system doesn't use. It saves a lot of time and eases workflow in the field.
There are exceptions: if I (accidentally!) snag some desired DX, I'll note more info in the logs because that will transfer to my main ACLog file back home.
I wish I could learn code. Working on it but my progress is slow. Great video!
Just keep plugging away at it. You'll reach a point where your brain simply hears the characters instead of the dits and dashes. You might also check out the Long Island CW Club--they're a wonderful group to help develop your CW skills!
@@ThomasK4SWL Thank you for the information and encouragement. 73
Great video. Just a heads up, the wire you hooked up to the transformer is not the counterpoise. That wire is used as a separate antenna(sloper, inverted L, etc). There should be a second shorter wire on another winder with the MPAS 2.0. 73
Yes, that's correct. I use that one as a counterpoise, though, because I only want to carry one extra wire with me and occasionally set it up as a random wire (without counterpoise, but with ample coax). Cheers, Thomas K4SWL
“I’m not trying to DX with Armenia” 😂 so true. Managing expectations is always key.
I like that antenna, but dang that's 1/2 the cost of a stripped down KX3. 53:20 The Radio Prepper is French (he lived in the U.S. for awhile). He could help with the radio terminology. He's done videos in the past in both in English and French
Yeah, I love Gil's channel and have watched his videos in English and French. I actually reached out to him a couple weeks ago asking for translations but haven't heard back yet. Like me, I kno he's been super busy. Yes, very true about the CHA price as well. For what it's worth, though, it's one of the few antennas I've ever met that I thought I might pass on to my kids in the will. :) Cheers, Thomas
@@ThomasK4SWL I wonder if it's possible to build an antenna like that for 1/4 the cost. If so, it would make for an interesting video.
Thank you sir !
What is the keyer that you are using? I just received my IC-705 last night and am trying to get it set up and get used to it. I am having fun with it on D-Star today but I want to start taking it out to activate parks with soon which was the purpose of buying it. I am just starting to (or attempting to try to) learn CW, and the only Meyer I have is a big heavy MFJ-422D which is powered by a 9v battery so that I can practice without being on the air with it, but I wouldn’t want to try to carry that out in the field. A lightweight plastic one would be a lot easier, and make me feel better about taking it out of my shack.
So there's a link the video description to my full field report on QRPer.com. In that field report, I'll have a link to this exact key. I can tell you that it's a CW More Pocket paddle. I highly recommend! And good on you for learning CW! You can do it! Cheers, Thomas (K4SWL)
@@ThomasK4SWL thanks, got it ordered
Have you added an a portable antenna switcher to your setup? Curios who makes good ones? Thanks
I have not because I typically only deploy one antenna.
I wonder what this PAT PAT signal is. In Poland, I also hear it on various radios
Great video as always! Is the MPAS 2.0 light enough for SOTA? I got a super MP1 to eliminate having a tuner although a Elecraft T1 is in the mail as we speak.
Sure it is! Especially if you only plan to operate with the top section of the MPAS 2.0 for 20M.
whats the brand/model of the patch cable between the tuner and the radio? I know you mentioned it but I've gone back and try to see it again but no luck. thanks!
It's an ABR Industries cable and I highly recommend it. Here's the article you probably saw and I point to the two sizes I use the most: qrper.com/2021/01/the-importance-of-quality-cable-and-connectors/
Www.peovi.com has a protective mount for the 705.
I came very close to buying one of those. I can't tell how much weight it would add and I sort of wish there was a bit more protection on the back. With that said, the back of the IC-705 is more rugged than the front so it may be unnecessary.
Nice job Thomas and as usual an excellent video. 73, George K2WO
Many thanks!
Hi Great video I just found it. have you looked at the peovi cage for the 705 ?.
Yes I have and it is being considered!
Nicely done.
73
Hey Tom, we'd love to have you back in the UK. Where were you located when here?
We used to live in a village called Shere in Surrey. We loved living there (although the cost of living in that park of England was scary!). We plan to spend a full summer in the UK in 2022 or 2023. We really miss living there.
It would be great to see some videos of you getting the wire in the tree. With the Chamaeleon, do you hoist it up by the isolator to create the V or do you throw the entire wire over the branch?
Hi, Dave, I do plan to show how I deploy my wire antennas soon. To answer your question about the Chameleon Emcomm III wire antenna: Yes. :) I do both. I've used the isolator to create a V, but I find it can be tricky to deploy on my own and, especially, if I'm in a dense forest. Sometimes the little isolator will twist if there isn't tension on both sides as I deploy it. Most of the time, I simply use a tree branch as the apex of the V and that also works. Perhaps not *quite* as efficient, but in practice it makes little difference. Cheers, Thomas
What battery is that you are using and approximately how long does it power your radio at 10 watts?
That's a 3Ah battery. I should think it would keep the IC-705 at 10 watts for 3 hours of continuous operation? Possibly more. I'm not sure because I typically run it only at 5 watts even when hooked up to an external battery.
Have you done any activation with MCHF M0NKA? I wonder what would be your opinion on this rig if you have opportunity using it.
I have not, but I would love to. In fact, I've been searching for a used MONKA version of the mcHF or even a local friend who could loan me one. There's a backlog on new ones at present and I think there may even be a new version in the works. I've been avoiding the Chinese clone ones because I like supporting original designers and manufacturers (M0NKA in this case) of gear.
@@ThomasK4SWL Few of my friends are using MCHF as standard field day equipment. I must say, this rig is absolutely amazing.
Would this be enough radio to talk to people across the ocean ? I know it’s only what 5 watts. I’m Texas and would like talk across ocean and I really like the small size .
Absolutely! If you've got the right antenna and propagation is favorable on the frequencies you choose.
Another good one Thomas. I've ordered my paddles like yours direct from CW morse. Look forward to using it. What camera did you get for your YT videos? It looks really good.
I got a refurbished Google Pixel 3. I read a number of reviews that tout its camera and battery life. I love it so far. The battery life is *much* better than most action cameras and the video quality just as good if not better in low light. Plus, I can upload directly from the device which isn't as easy to do with cameras. Loving it so far, but I need to get used to the microphone pattern.
@@ThomasK4SWL it really was good. I know what you mean re the audio. I'm going to look at this as well as a wireless mic. It would be a great combo.
Is 5-10 watts enough? I cant decide which transceiver to get as my first, and I wonder if I will have fear of missing out of a 100watt setup. I want to do voice and try some digital stuff, not really CW.
If planning to do voice, I would suggest you go for a 10 watt radio. 5 watts will certainly work for SOTA and POTA--you'll get your activations completed--but I've always felt 10 watts was a proper SSB QRP amount. There's nothing wrong with going for a 100 watt radio either. I would simply suggest you get one that's easy to take to the field. They will require a larger battery than QRP radio even if only operating low power. Also, you'll likely need a good in-line RF choke for end fed antennas.
@@ThomasK4SWL I can bring a small 12v lithium battery along with the 705 to get it up to 10 watts if the 5 added watts will make much difference?
I'm still torn between a 7300 and 705. I'm mostly operating from home, but the technology availaible suggests I can hold out for a higher power mobile rig to have maximum flexibility.
I also wonder if icom will release an upgrade to the 705 soon. Do they release new products very often?
@@anonymous_friend I think 10 watts over 5 watts really helps in SSB, much less so in CW. You're not alone in trying to decide between these two radios. If you're planning few field trips with the radio, then you might consider the IC-7300. If doing POTA, SOTA, WWFF etc. then I'd go for the '705.
Thomas, what is that custom orange prop piece you use under the IC705 that screws into the mounting threads? It looks like it props it perfectly, I need one for my 705. Thanks
Here you go, Ryan: qrper.com/2020/12/a-simple-3d-printed-foot-for-the-icom-ic-705/
Ahh. So it’s not for sale commercially?
Thank you for this. Being new to all this and not yet beginning to learn CW, listening to you, I can actually hear the proper spacing between letters and words. I have high frequency hearing loss but your code comes through very clearly. My question is about your antenna. Are you only using the one Counterpoise provided and is your antenna still Omnidirectional or does it favor the direction of the counterpoise? I'm still playing with my 705 but I'm using the Comet HFJ 350M whip antenna that is actually surprising me with it's performance. My only issue is trying to understand the set-up better so I can have more consistency in its performance, especially the Omnidirectional piece. Thanks in advance for your help. Ciao Walter
Hi, Walter, Great question! Sadly, I have no idea if the counterpoise placement has a huge impact on signal direction. I must assume it does have some impact, though. I might reach out to Chameleon and ask since I'm sure they've run an analysis. Being a vertical, I'm sure it's mostly omni-directional. And, yes, I only use the one counterpoise with it. It, and other verticals, would benefit from a larger counterpoise system, but it's just overkill for POTA activations. Ciao! Thomas
Ok top met ça reste du made in Chine ?
Je pense que c'est fabriqué au Japon.
Hi Tom, what do you use to make the videos? is it a mobile phone Thx.
I use a first generation OSMO Action Camera.
I just realized I've watched this before and didn't post any comment? shame on me. so the one question I have for you today Tom, is have you ever noticed a change in SWR because of the "Coax being Coiled up in a bunch? as you did here? when you hooked it up to the vertical.? I know the tuner did its job but wonder if you have experienced that at any time with any installation? thanks again for another great presentaions/activation. de EllisWA1RKS
Since this video, I've stopped coiling my cable, because you're right: I know that has a negative effect. Carl at Chameleon even pointed that out. :) Thank you, sir, for the kind comment! Cheers & 73, Thomas
Hi Tom, I was in contact with a Scottish Ham this afternoon and mentioned that I was waiting for my MPAS 2.0 to arrive, and he told me that he also has this Antenna and advised not to use in wet weather as this will cause a problem with the cords that join the extension whip together! Any thoughts on this? You would expect that an Antenna of this cost and the fact that it is military grade should be able to be used in all weather conditions!!
Hi, Alex, I would consult Chameleon directly. It's funny you bring this up, because I've had an article in my drafts folder of QRPer.com for the better part of a week entitled, "Portable HF antennas generally don’t like wet weather." I can't imagine that being in the rain a bit would damage the CHA MPAS 2.0. Perhaps if permanently installed? Thing is, most portable antennas assume you'll be operating in reasonable weather or if in the rain, no longer than a day or two. Most portable antennas have no protection for the RF ports. Those would have to be sealed as well. I would reach out to Chameleon, though, and confirm.
@@ThomasK4SWL Tom, when I get mine I'll see what it says in the instructions, I'm sure it's not a case of you can only use when the sun is shining ,if that's the case no good for the UK!! I think you may have to use a special conducting compound on the joints, but as you say mabe not to use for a permanent base Antenna. I know its classed as military grade and I'm not sure how much its used by the military, but it would be ridiculous if they couldn't use it in the rain. One to keep an open mind about. Take care you never know we may have a qso with 705 and MPAS, that would be really cool!
From page 3 of the MPAS 2.0 Manual.
"The CHA MPAS 2.0 is configurable to facilitate Near-Vertical Incident Sky wave (NVIS)communication and is totally waterproof."
On the chameleon site.
"IT'S IMPORTANT TO WATERPROOF THE CHA MIL EXT 2.0 BEFORE PERMANENT INSTALLATION
Use the Ideal NOALOX 4 oz. Anti-Oxidant Compound to improve the efficiency of aluminum conductor connections. This compound provides additional inner-strand and inner-conductor current paths."
I got mine in May 2020 and because it performed well above expectation, for instance, regular contacts to South America on 20m from Ireland with the FT-891 100w I decided to leave it up permanently on the front lawn.
I inspected it yesterday and after an Irish wet and windy winter the antenna is in perfect shape, I used Noalox on the Aluminium section which is essential and I was able to take each section apart with no issues, if you don't use the Noalox you risk the aluminium sections seizing together and I will put more on before the next Winter. What it would be like after 5 years is anyone's guess but so far so good, I actually use it as my sitting room setup with a wire EFHW 49:1 for more local coverage and 80m. What the Wire doesn't hear DX wise I can clearly hear on the MPAS 2.0, it makes a really excellent SWL Antenna too. Very very happy with it for a portable antenna it's really good.
I also have the CAP HAT and use only single counterpoise that was supplied. I can get away with no tuner on some bands too.
Obviously 80 and 160 meter performance will be well down but that's what the supplied wire is for, could even get another Hybrid micro and antenna switch for that 80 and 160m.
www.manualslib.com/manual/1607811/Chameleon-Antenna-Cha-Mpas-2-0.html?page=3#manual
very good to lsn me haha...but not only antenna load you..probable good street for italy..congrats for the video and see you on air again ..now i have rotor damage uff :( ciao 73 and GL on pota Raf, ik4idf
I hope you get the rotor sorted out soon, OM! All the best & 73! Thomas K4SWL
Another interesting video Thomas. You have a relaxed style which i like.
Regarding your kit, I have just acquired a 705 -- but the MPAS 2.0 is wayyyy too expensive in the UK -- around $850! No portable vertical is worth that much -- so I will stick with EFHW antennas and my 7m pole -- total cost around $40. :-) 73 Bruce G4ABX
You know what, Bruce? That EFHW with a 7M pole will serve you very, very well! I agree: $850 is *way* too much to pay for a vertical even if it's wonderful. Frankly, in terms of portable performance? It's awfully hard to beat an EFHF.
Can you please tell me what you're using as a pole and support?
Cheers,
Thomas
K4SWL / M0CYI
@@ThomasK4SWL Morning Thomas. We have a great supplier of SOTA kit here in the UK called SOTABEAMS. I've been using their kit for probably the last 20 years. Their 7m pole (Fibreglass, fishing pole) is about $27 and mine is more than 10 years old. Lightweight and robust. My EFHW antennas are all home brew using components from SOTABEAMS. 73 Bruce G4ABX
Hey Thomas, great video. I'm very excited about getting back on the air after a ~15 year break. It's one of the benefits of retirement. :) I was an active CW operator for ~20 years. I got my Novice license back in 1974 at age 13.
I'm replicating your equipment choice. What keyer are you using?
I had planned on using one of my now ancient transceivers (IC-735 and a Heathkit SB-102), but they both need alignment/calibration and I couldn't find anyone who does that for those rigs. I guess I will donate them to the local club here in Greensboro. Hopefully, someone will make use of them.
Thanks and 73s
Bob Steele
W4EGJ
Hi, Bob,
Before I forget, you might reach out to Vlado (N3CZ) as he may be able to do the alignment for you. He lives here in Asheville. His website is hamradio.repair
My key is a CW Morse Pocket Paddles: cwmorse.us/product-category/pocket-paddles/
Welcome back to the wide world of amateur radio! :)
Cheers,
Thomas
K4SWL
@@ThomasK4SWL Thanks, I'll give him a jingle.
Do you go to Mount Pisgah?
Absolutely. Typically activate it once a year for SOTA!
how do you get the park grids
So I rarely look up the actual grid when I go to a park. I probably should since, on occasion, I've been asked by hunters in QSL cards.
The tool I typically use is the Grid Mapper on QRZ: www.qrz.com/gridmapper
You need to know either the GPS coordinates or you'll need to physically move the map to find the site--that's the only issue. It can take a bit of research.
I didn't see it asked but I might of missed it... What software are you using on your tablet? DE AH2EJ
I'm using N3FJP's Amateur Contact Log. Highly recommend! de K4SWL
I really enjoy watching your videos, really informative for this wannabe POTA operator. Your videos have inspired me to take CW online classes via LICW Club, only at 13 characters at the moment and I admire those ops that can send and decode so quickly. Hoping I will get there in due time. I'm slowly collecting gear and the CHA MPas 2.0 is on my wish list, seems so easy to set up. I notice some rings on the counterpoise wire, is that so you can deploy the wire in different configurations, eg. inverted V dipole? Keep up the wonderful "live and raw" footage, which make your videos special to me. 73 de KI7UXT
Hi, Kell, You will certainly make your goal of operating CW in POTA! Well done and I've heard so many good things about the LICW Club. Yes, the rings on the counterpoised are there so that you can actually deploy the counterpoised in an elevated position or even as a random wire antenna! I'll often use the floating ring to form an inverted V shape. Cheers, Thomas K4SWL
Man Utah. That’s sweet.
PS: Italy!
So you bought the 705? I know you had mentioned prior that you were reviewing it. I figured it was a loaner or maybe it was and you just bought it.
Yes, I purchased it for the review and had planned on selling it after. I was too impatient to wait for a loaner from Icom--they had planned to send me one, but it might have taken a few months. Obviously, I hae no intention of selling the IC-705 now. It's a keeper!
@@ThomasK4SWL Nice. And not that anybody cares but I called Elecraft yesterday and I’m 5th in the que for my Kx3 pack assembly. If the suppliers come through. Speaking of being impatient. Lol.
Thanks for this video! This really looks like something I'd like to try. Perhaps I'll start some planning and get some of the parks in my area on the air! 73 de Doug VA7LM
Please do, Doug! Warning: it's incredibly addictive... :)
Thanks for encouragement to get back into CW et bonne chance avec une video en francais. VO1OK
Merci bien et 73! :) Thomas K4SWL
Hey Thomas, I tried to make a contribution via your PayPal Coffee Fund link, but nothing happens when I click the pay button. Regards, Bob
First of all, thank you. :) Maybe try this link? www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=TGGFP2XVZDPP2
It's possible a browser plugin might be stopping the button from executing the script (but that's a total guess on my part). :) Again thank you for even considering this, Bob.
@@ThomasK4SWL Sorry, but same issue. It's not working. I will try a direct PayPal gift to you.
@@ThomasK4SWL I need your email address for PayPal. Mine is zaydebob@att.net Zayde is Yiddish for grandpa.
Hi Tom, I enjoy watching your vids, but especially this one as have the 705 and am waiting for the MPAS 2.0 to arrive from Nevada any day now, no expense spared when it comes to Ham radio!! Don't tell the xyl... I don't do cw so hats off to you for your skills. Enjoy the radio, and no edits is best! 73 Alex M0KVA. PS How did you end up with a M0 call..
Hi, Alex, You'll love the IC-705 and MPAS 2.0 combo and find that most external ATUs will achieve excellent matches. The MPAS 2.0 quality is second to none. So I lived in Shere (Surrey) for several years in the early 2000s. I worked as an application developer for Corning. When I travel to the UK, I can still use my old call now that callsigns are lifetime! Cheers & 73 Thomas K4SWL / M0CYI
@@ThomasK4SWL Thanks for the reply to my message and keep the nice videos coming , I watched this one whilst munching on my breakfast !!
Another excellent video. Watched it tonight. I activated in the morning same day you did this video and my luck was about the same. 73 KN3A
Some days are like that, aren't they? Still: it's always fun to see how it plays out. Happy activating, Scott!
Ok Thomas! Another good pedagogical illustrating video!
It seems You've found the ICOM
IC-705 and it's "extras" through the different finesses of its menus.
Tip: Why NOT test FT4 o JS8 CALL (xor PSK31/63)? That radio can run whatever You wish and AT astonishing distances!
Have Fun Thomas!
"Hals und Beinbruch"!
73s de Gunnar sm6oer >>\
Thank you, Gunnar! Yes, indeed! I plan to run a little FT8/FT4 someday for sure. I have done this from the QTH with the IC-705. It's so easy to do. Cheers, Thomas K4SWL
I want a portable QRO station. Say 1.5 KW with Solar Panels
You can certainly make one! I know a local ham who has a full legal limit "portable" station!
You should invest in a lavalier mic.
So actually I actually do use one now. Need an even better one though.
My IC-705 arrives Friday. It’s kinda your fault. And my KX3 won’t talk to me.
Ha ha!!! Sorry to be an enabler! :) Your KX3 will still get exercise! Enjoy that IC-705--I'm sure you will!
Hey Tom ... I'm 64 this year and never seen the sun 🤣
Nick
G8SYE
That antenna setup looks a lot like a combination of the clansman antennas, groundspike and mast. The top bit folds just like the clansman HF whip, but without the spring coil. I think you would have been better off with a say, three shorter counterpoises rather one really long one, unless you are making it into a ground loop. maybe you can try one of these? www.kk5jy.net/LoG/
More counterpoises would certainly help this setup and, in fact, elevated counterpoises might even be ideal. Truth is, though, for POTA it's just a bit of overkill if it takes much longer to deploy and pack up. It's often so easy to make contacts, I don't bother with making the antenna more efficient. I do have a 20M vertical with 6 counterpoise wires. It's brilliant! It's very quick to deploy, but a real pain to pack up later. :) I've never tried a LoG mainly because RFI is so rarely an issue in remote parks, game lands, and WMAs. Thank you, though, I'll check out the link!
I do have stalkers. Only once has a sherriff been called. In hickman county, TN.( Un ja! haben ze paper vvork) one person accused me of beeing a spy so I spoke my pour German for a tease. That did it. Hi hi😂 kv4li 73. Well for Cheep! a piece of paneling cut to shape. ( That is to Mach the dials to hold it in place) would be just fine for transit. Do this with my 330, 660, and 506. Ps I use a pixie w/40 meter Xciver and a long wire. Kinda swl/cw set up. And a fist full of xtals. Even to include ssb freqs. Tks Fer good show. "Rem: voyager#1, #2. Are qrp. And cover millions of miles. De kv4li.
Maybe no one from Armenia was listening