Ugh.. haha I figured they would but then again I don't mind a change in scenery haha I sorta like the way more open front end but it makes the bars feel really really low..
@@LifeWellRidden the lever guards look cool, but they definitely don’t offer as much protection on track, I’ve had guys reach over while racing and try and grab my front brake or kill switch me before. With the wrap around it’s almost impossible.
Dammit!! How come I aint never seen this guy??? That would have been so helpful! But then again, thinking back I don't remember if I had any plugs in the factory place??
It's the P3 Max shield, I'll throw a link in here for it! BUT you can only use it with the factory header, the Tekmo one wont work.. Guard - p3carbon.com/products/p3-heat-shield_ktm_690-enduro-smc_2019-2022?rq=mk_ktm~md_690~yr_2021
Why do you need to delete the handguards actually? Not a great look for the bike. And the new break fluid reservoir looks kinda ghetto imo😅 But I the braking upgrade must be nice
I really didnt.. I probably could have spaced them out with some washers or a new part from Zeta but to be honest I wanted to switch it up a bit, try something new! I would have to agree with you, the reservoir IS ghetto hahaha like it wiggles around while you ride and you see all the fluid slosh around and it seems like cheap ass plastic hahahaha But I will have to say, regardless of the pain in the ass to install it is worth it!
@@LifeWellRidden Go for Rotty Reservoir. My 23 had the Brembo reservoir and switched to rotty. Much cleaner. I have the Brembo master and Stylema caliper. No mirror mount, but whatevs since youre using other mirrors. I also have the Zeta clamps and spacer for the handguards, but I have barkbusters
@@steve7572 The Rott one looks nice, I should have ordered with the kit but I think I will switch back to the bark busters.. the look is cool but not so much supermoto anymore hahah
These are the "street: lever guards by Bonamici. I got one for the left and right side (sold separately) with an ADL14 adaptor to fit my 690 bars. I would highly suggest measuring your won bars because they may very in diameter.. www.motovationusa.com/billet-aluminum-lever-guard-by-bonamici-LPRL_B
Zeta makes handlebar clamps that allow space for the master to fit with the guards. I just did the same setup, the part number is ZE71-1613
Ugh.. haha I figured they would but then again I don't mind a change in scenery haha I sorta like the way more open front end but it makes the bars feel really really low..
@@LifeWellRidden the lever guards look cool, but they definitely don’t offer as much protection on track, I’ve had guys reach over while racing and try and grab my front brake or kill switch me before. With the wrap around it’s almost impossible.
@@donglidemoto6121 Dang good to know! I hope people don't start reaching for my bars, hell they are passing me anyway hahah
Tacomoto makes plug and play fork wrap turn signals. No wiring needed and very bright
Dammit!! How come I aint never seen this guy??? That would have been so helpful! But then again, thinking back I don't remember if I had any plugs in the factory place??
Thanks for the video. Now you have two track bikes
Right!! Guess I have to buy a new street bike..
What exhaust shield is that? Never seen anything that goes all the Way to the end of the manifold
It's the P3 Max shield, I'll throw a link in here for it! BUT you can only use it with the factory header, the Tekmo one wont work.. Guard - p3carbon.com/products/p3-heat-shield_ktm_690-enduro-smc_2019-2022?rq=mk_ktm~md_690~yr_2021
Why do you need to delete the handguards actually? Not a great look for the bike. And the new break fluid reservoir looks kinda ghetto imo😅
But I the braking upgrade must be nice
I really didnt.. I probably could have spaced them out with some washers or a new part from Zeta but to be honest I wanted to switch it up a bit, try something new! I would have to agree with you, the reservoir IS ghetto hahaha like it wiggles around while you ride and you see all the fluid slosh around and it seems like cheap ass plastic hahahaha
But I will have to say, regardless of the pain in the ass to install it is worth it!
@@LifeWellRidden Go for Rotty Reservoir. My 23 had the Brembo reservoir and switched to rotty. Much cleaner. I have the Brembo master and Stylema caliper. No mirror mount, but whatevs since youre using other mirrors. I also have the Zeta clamps and spacer for the handguards, but I have barkbusters
@@steve7572 The Rott one looks nice, I should have ordered with the kit but I think I will switch back to the bark busters.. the look is cool but not so much supermoto anymore hahah
Can you link the lever guards please?
These are the "street: lever guards by Bonamici. I got one for the left and right side (sold separately) with an ADL14 adaptor to fit my 690 bars. I would highly suggest measuring your won bars because they may very in diameter..
www.motovationusa.com/billet-aluminum-lever-guard-by-bonamici-LPRL_B