Royal Enfield Continental GT 535 Brembo break caliper complete servicing. Disc rubbing problem gone.

Поделиться
HTML-код
  • Опубликовано: 9 янв 2025

Комментарии • 35

  • @kartikeymore3472
    @kartikeymore3472 2 года назад +1

    Great video brother. One small suggestion..dont top up the break fluid while removing the pistons..hold the breaks and pull out the pistons with a plier..they will come out easily
    Again thanks for the video..cheers👍

    • @cgt5353
      @cgt5353  2 года назад +1

      We should not hold the piston with pliers bro, it will create a scratch mark on the piston and that will damage the inside rubber O ring. Topping up brake fluid was the easiest solution without harming any part or without the requirement of any tool

  • @sachinbaviskar7511
    @sachinbaviskar7511 Год назад

    Dekho bhai koshish karne walo ki kabhi haar nahi hoti isliye hame koshish karti rehena chahiye......

  • @MyFaraz786
    @MyFaraz786 2 года назад +2

    Thank you for the video a big help! Btw bro how did you did the brake fluid reservior setup, it looks dope, please make a video i'd want to do it in my gt

    • @cgt5353
      @cgt5353  2 года назад

      Bro that is not just reservoir but the complete master cylinder brake setup. It did cost me 4000 Rs for both side (cluch and brake). 1st copy of Brembo, looks awesome decent breaking capacity. And really really thanks for watching my video. Please do subscribe to my channel .

    • @amol7791shah
      @amol7791shah 2 года назад

      ​@@cgt5353 any information regarding disc plate for front , mine has got loose on weld joints . so now need a new disc , so is there any alternative disc for direct fit

    • @cgt5353
      @cgt5353  2 года назад +1

      @@amol7791shah Alternative I haven't tried yet bro but, try to find any disc size of 300mm. May be Java bikes or new Mentor bike's disc might match, Or Benelli bike. But in this case go with Brembo one bro the stock one.

    • @amol7791shah
      @amol7791shah 2 года назад

      @@cgt5353 thanxx i will try to find out and are you on Instagram bro ?

    • @cgt5353
      @cgt5353  2 года назад

      @@amol7791shah yes bro I have two accounts akaman92 and akaman1992

  • @sankhasubhrabhowmik2574
    @sankhasubhrabhowmik2574 Год назад +1

    can u sugest how to clean reserviour piston i m having difficulty opening it

    • @cgt5353
      @cgt5353  Год назад

      Yes luckily last week only i cleaned it. You need a nose pin pliers for that, you need to open using nose pliers and be careful there is no replacement part of the reservoir. You can call me on 9874751158 for more details.

  • @sankhasubhrabhowmik2574
    @sankhasubhrabhowmik2574 Год назад +1

    thank you so much for information

    • @cgt5353
      @cgt5353  Год назад

      You are welcome bro.

  • @juanjogt6504
    @juanjogt6504 Год назад +1

    Hi hello you now the brake pad is the same continental gt 650?

    • @cgt5353
      @cgt5353  Год назад +1

      Yes it’s the same.

  • @lucifer-nl4ie
    @lucifer-nl4ie 2 года назад +1

    One vedio for pillion seat please🙏🙏

    • @cgt5353
      @cgt5353  2 года назад

      What you want to know about pillion seat bro???

  • @ramboram6384
    @ramboram6384 2 года назад +1

    Bro do u know any substitution for brembo assembly kit. Mine need to replace . repairing kit is not available and need to change the whole assembly cost of 10k

    • @cgt5353
      @cgt5353  2 года назад

      Assembly kit means can you please name out the components please???

    • @ramboram6384
      @ramboram6384 2 года назад +1

      @@cgt5353 bro front disc brake unit ( brembo )

    • @cgt5353
      @cgt5353  2 года назад

      @@ramboram6384 I got that but what do you want in that??? Piston, sliding pin, retaining pin, the vaccum rubber components, O rings etc etc. What are you looking for exactly?

    • @cgt5353
      @cgt5353  2 года назад

      @@ramboram6384 BTW I think Honda CBR 250R non abs caliper components will fit. Once again, it's my assumption. I am thinking because the disc pad are same for both.

    • @jyothismgeorge6013
      @jyothismgeorge6013 10 месяцев назад

      @@cgt5353 wil cbr 250r caliper fit on interceptor or GT ?

  • @niranjankedambadi
    @niranjankedambadi 2 года назад +1

    Great info bro 🙏

  • @vinaykumarpal498
    @vinaykumarpal498 2 года назад +1

    Bro real break pad hit ho kar break lag kar rahta iska bhi same issue hai kya?

    • @cgt5353
      @cgt5353  2 года назад

      I didn't understand bro please elaborate a little.

  • @Soloshortsmedia
    @Soloshortsmedia Год назад +1

    Brother I have a question

    • @cgt5353
      @cgt5353  Год назад

      Yes go ahead

    • @Soloshortsmedia
      @Soloshortsmedia Год назад

      @@cgt5353 my gt 535 front disc caliper complaint,so I can't afford the new brembo caliper, Can I use the disc of any other bike

    • @Soloshortsmedia
      @Soloshortsmedia Год назад

      The complaint is major kitt part problem,

    • @Soloshortsmedia
      @Soloshortsmedia Год назад

      It's a super rare complaint,I'm tired of the problem

    • @cgt5353
      @cgt5353  Год назад

      @@Soloshortsmedia msg me on Instagram (akaman1992), i will suggest you.

  • @roymathew315
    @roymathew315 11 месяцев назад

    Nice