PCP Valve New Design
HTML-код
- Опубликовано: 2 окт 2024
- This is my new PCP Valve Design for larger caliber.Next video will upload soon.
Support my channel financially
/ faceoffchannel
or
If these videos are interesting, please donate for me at this link:
paypal.me/face...
Buy PCP air cylinder & regulator
amzn.to/37YM5C6
High pressure hand pump
amzn.to/386ODhu
amzn.to/383Gniu
Follow me on Instagram:
/ faceoff_channel
Song: "Sappheiros - Embrace [Chill]" is under a Creative Commons license (CC BY 3.0)
Music promoted by BreakingCopyright: bit.ly/Sappheir...
Track: Lost Sky - Dreams [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Lost Sky - Dreams | Tr...
Free Download / Stream: ncs.io/DreamsYO
"Peritune - Chinatown Healing" Attribution 3.0 Unported (CC BY 3.0)
Music provided by BreakingCopyright: • COPYRIGHTED, DO NOT US...
Top notch workmanship. I wish you were my neighbour, could have learnt a lot from you.
you are an expert in PCP carbine construction congratulations
When the loc-tite breaks that 3 mm rod will be a dart lol
Anthony White yeah lock tite only likes to hold with a thread so it has something besides friction to grip with. Still trying to figure out the application for this also. It’s a really large value. Definitely limits what you plan on using it for.
Anthony White Which God to explain under the gas cylinder mouth on the black is what valve ?
Yeah its happened to me with epoxy they come out crazy fast
Compressive shear strength (ISO10123) for 262 with Steel pins and collars is 1450 psi, but only 25% of that with brass. so be carefull
Absolutely brilliant!! Thanks for sharing!
I’m down with Team Face Off!!!! You’ve simplified my ideas for me bro!!! Thanks you are brilliant
1iyyyyyyuy.
P
You have a lethal design flaw there.
The hammer/piston you built will wear down with each trigger, it might hold one trigger or 100 but at one point the small metal plate will separate from the piston, resulting in the piston to fly backward. Possibly right into (and through) your head if that's behind it.
That's a certainty, it will happen the way it's built. It might even happen without triggering if it stays pressurized longterm.
Please take that into consideration with such designs, keep in mind where point of failures are likely, or it's "face off".
A second more general warning comes from a death in germany a couple years ago.
The guy was a hobby diver and he built something very similar to your valve, also from steel screws to equalize pressure between his many bottles, pressure up to 4500 PSI.
He did that for multiple years, one day the steel screw construction broke and two parts flew into him. One through his chest and one into his skull. He died from the brain injury the same day, his child found him.
I've seen a steel screw bigger than the ones you use rip in two pieces (more than 1 cm in diameter) from material weakness from less than 100 atm/bar (1500 PSI).
Aside of that, it's quite awesome to see such functional design made with such simple methods. inspiring. Also scary.
Simple solution to this problem is to not drill a hole through the whole part. Just a nest to stick in the shaft.
What would you recommended instead of the steel bolts?
@@acorgiwithacrown467 an actual threaded rod, threaded into the seat-head would work, especially if you use red Loctite
Dear face off,
I am very impressed of this particular pcp valve.
Is there any ready units to purchase from you?
Great Job!!!
Keep it up!!!
Saludos desde México!!!
ok
Awsome 😘 one's again u nailed it
🙏🕉🙏🇮🇳
Thank you.
@@faceoff2 can u make a pocket air powered mini dart gun ?
🙏🕉🙏
@@NewLife-jw9to That's a good idea, i will definitely make one.
@@faceoff2 waiting for the video plz make it in ur next video
🙏🕉🙏🇮🇳
“Rubber bush” I think that’s what’s on blowup dolls lol
your designs are functional and easy to get. looking forward for your next videos
Thank you man
@@faceoff2 rp
@@faceoff2 Вы настоящий оружейник-конструктор!))На 2:43 минуте ,что это за фтулка?
Those who wondered what is the bypass that connects the valve and the trunk, its name is 90 degree stem brass
Imagine this guy with serious tools for example a lathe ,milling machine and a decent tig welder,,,,, it will be the birth of a new pcp air rifle brand for sure, exellent work my friend👌
ช๐
He got 3.2 million views, guess he can buy the equipment now
Not really
Will the gap of the trigger lever not leak? Why do I always leak when I make it
Super work..
That is nice work.
testado e aprovado 👍
Sangat bermanfaat sob, Buat yg mo repair Bushnell 3-9x40 cara bongkar pasangnya dimari monggo di simak Mas bro : ruclips.net/video/HezPSfHlPLA/видео.html
is this constant pressure for every shot? as gas gets less and less,pressure is lower than before. am i right?
What is it 0:20
You should indicate where you bought the materials.
How to ader in india
Your drsigned are so good Tamsak done.
设计简洁,思路清晰。只是针阀弹簧为什么不设计在气室内。安全隐患太大了。用到20的气压太危险了。
I was, in the past, more critical of your vids...but I've come to better understand your methods and your ability to work with "what you have". New, more appreciative, fan here.
y
Terbaik lah mana2 yang nak buat senapang angin boleh belajar dari mamat ni Info lengkap.. 👍👍👍👍Good job💝💝
Thank you.
Is it better to have the spring outside off the valve rather than on the inside like you always do normally?
It is relatively easy to install spring on outside also quite easy to adjust the spring tension without disassembling the valve.
1:12 can you tell me what is the name of the brass thing that you screwed into the fitting. if it's not hard you can make the name and size of the parts by timecode
I do not speak English well I write with a translator
but I do think you should either name every one of these parts and tell us where got them. because, for example, a lot of people might not know the 3mm rod is from and old hard drive and might try to buy it. the rubber bush also, where did u get one? or that thing that came before the rubber bush, i dont know what it is... that aside, great vid, very helpfull
Totally agree
eBay😁
Probably better he didnt before someone out there hurts themselves lol. There have been some pretty bad accidents before. Like the one guy who got a 30 mm end cap put threw his leg. Most people know how to be careful, but theres always a few who dont.
very clever and nice work ;)
Hello sorry if I disturb you but I can not find the compression fitting could you give me a link to buy it the same as yours I would also need the 3 mm plug to be drilled. Unfortunately I can't find it
Tanks

How does this push the pin in the regulator? Or have you removed it? Newbie airgun maker here
mantap ilmunya..pengen juga membuatnya...
heyy i have a tip for the next vid. could you pls write everything down like what u use and stuff thanksss
Very nice
Thank you.
La distancia que hay desde la válvula no llega a la pipeta de aire. Eso no funciona
Can you help me fix my Sig MCX CO2?. I am wiling to pay for repair & shipping. Please let me know. Thank you
hey, do you mind sharing the links for all of these parts? I cant seem to find many of them at the hardware store. love your channel by the way.
You can buy all of the major parts from ali Express
@@hurabbas5959 u need to know the name of them😂
I want one can u help me to purchase.
How to get this?
So does this hit the pin on the regulator? Or did you disable the pin valve on the regulator on the tank?
I have removed it from regulator
That's soon going to fail and hurt you badly...
BRAVO VERY GOOD VIDEO!!!!!!! GEORGE CREECE ATHENS
Can you make one where the air comes out one end instead of the side? Like have the tank intake on the side and the barrel on the other end
Hello do you remove the pin in the vapve pin or not how to open the valve if you not remove the pin.or not remove air
Love the music so relaxing.
Glad you like it
นาที2:08 เขาเรียกว่าอะไรครับ เป็นแผ่นกลมๆสีเหลือง
Vi... I need to know.. Konsa size ki nut ap regulator ki upar use kiya...plzz
Luarbiasa kreatif👍👍
Barely one thread engaged, and working with around 3500psi?
I'd keep well away from that . . .
Also, you ran the Taper Tap from the wrong side . . .
Istimewa..
Bro I'm making air gun I need some help ,how can I contact you
Plz reply 🤚
Josss
Awesome!!
Thank you 😍
I want to buy the materials taht you use to make an valve,where can i buy and where can i find?
Hii. Bro. Bota. Koha milegi. Bro
What are the parts used? Can you list it for us?
8:35 We can convert that into something like a hammer for air gun right?
Thank you!
He's only showing u with a plies to hit the pin to release the air. The trigger mechanism goes behind that when completed
Mantap abangkuh Joosss gandosss tutorial nya... Mudah dipahami.. Mantap Mantaappp mantapppppp Josss gandos
Mantap bosqu Palembang hadir
hello bos.. i want buy this is item cant or not? pm you number
Cerous what was used for the cylinder
Very dangerous to be using HPA with those few little threads that you have on that last brass fitting. HPA can shear threads clean off and turn a valve into a projectile.
Looks like 500 psi reg, I think that would be sufficient. I wouldn't trust his pcp tank builds though
How to buy accessories? Please tell me full accessories name!
Bhai Silendar milegi kaha se or ye compressor watch
Bro where can I get the gas can or cylinder?And thanks for the video Good luck
Bro instead of this cylinder can we use steel water bottle
Bhai apna PCP GUN Name register karwalo bhot acha product bnate ho aap
This is revolutionary. I really like what you are doing and I hope that RUclips is not killing your channel! Keep up the good work! Thanks!
RUclips is hard.😪
ราคาเท่าหร่
ไหร่อยากได้
ชำึึึึึึึ ัััััั ึึึึึ ึึึึึึ ุึึึึึึึ ึึึึึึ ึึึึึึ ึึึึึ ึึึึึ ึึึึึ ึึึึึึึึ ึึึึึึ ึึึึึึึ ึึึึึึึ ึึึึึึ ึึึึึ ึึึึึ ึึึึึึ ึึึึึััััีี ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึ ึึึึึึ ึึึึึึึ ึึึึึึ ึึึึึ ึึึึึึ ึึึึึ ึึึึึึ ึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึส
Olá eu fiz uma pcp com válvula de extintor e cilindro de bengala e estou querendo por uma válvula reguladora,eu vou comprar uma válvula desparadora da custo g3 é uma válvula reguladora dessa chinesa se eu comprar um adaptador para unir igual você fez da certo?
Wow!! as always love your new design haha looks like your camera skills got better easy to see what you used, and easier to know each part's measurments. I am trying to make the valve of your last video. Unfortunantly, I dont have a tapping tool, it maybe hard to build this one >
You can buy tapping tool from AliExpress , it's cheap.
@@faceoff2 yes
face off ohh thanks looking for some :)
สั่งได้ที่ใหนครับ
@@faceoff2 whats the part at 1:24 that you screw into the cap... i cannot find it. Would greatly appreciate the info @faceoff
Es lo que me me faltaba para hacerme una escopeta de aire 😎👌
2:47 what do you call this piece thanks for the one who will answer godbless you all
Do you kow, approximately, the output power? In PSI, MPA, Joule, any...
Could you plz send me a material list
Thnks alot
That's so good
How about the power, how many fps?
Which God to explain under the gas cylinder mouth on the black is what valve
I can't find 1/2 inch coupler nut😭
Hello! I do not understand how the air is released from the tank, because the valve is actuated by the hammer, but the regulator is not actuated by anything. How is it possible to release air from the tank? Thank you.
New Subscriber here. Thank you for the incredible information!!!
how you will turn this into a gun? Like "Airgun"? It points upward and fire upwards whenever u pull the trigger. I'm sorry, I have zero knowledge about this stuff.
How do you screw a 1/2 female into the 5/8 unf from the paintball tank? I can't figure out how to adapt unf piping to bsp for my homemade gun
Will you comment about the cylinder name adaptor
Can u make a regulated valve please bro i want some regulated valve system in ur channel
He already made a regulated valve in this video
Regulator with valve
Sir please indicate the of materials..
hello
what do you screw at 1'14" ? after drilling and taping.
thanks
Can you make semi-automatic airgun plz.. show us u make?..thank you..
Aku boleh ni buat yg outol .tapi salah dgn kerajan .
Woww...amazing..I like this👍👍👍
Nice and interesting.It would be nice to give And added a language translation Because many of the audience don't know especially Indonesian
Haderrrr moga sukses Ndan mantap
Need description for every piece used!
Gửi cho toi mo
Fuck'n cool!
✌✌✌
Can you make 5 of the valves for me ????
So nice.hi bro...do u give me 1pc.plz i m from bangladesh.
sir maybe you can sponsor me for the pcp you made sir
hi can u pls tell me where did you get that air tank for this project? it will be realy helpfull if you can comment any purchase link for that
What pressure do you shoot this at
👍👍 i like to buy.. can't or not?
de que material es está valbula?