AirForce / GunPower PCP Condor SS mechanism | 2D animation | How PCP airgun works
HTML-код
- Опубликовано: 2 окт 2024
- In this video I explained by 2D animation how CONDOR SS PCP Airgun works. Simple animation, Name of parts, disassembly of gun, trigger mechanism, pellet fire mechanism. Other models like Talon and Texan can also be understood by this mechanism.
Here is the link of drawings
drive.google.c...
Thank you so much sir for your share your video, very helpful for me understand well of it's works.
Sekarang afc sudah ada seten power, mantep bg 👍
Air Rifle design has not evolved to really produce a more powerful discharge, mainly due to the projectile and driving band issues. A dual gas discharge chamber ( a small and large chamber, with the filled chambers of a small and larger, thus increasing the smaller chamber's pressure as the large chamber drives that small chamber's pressure with a larger diameter cylinder thus increasing the velocity of the projectile.. of course this uses much more gas, but can be used for a much higher initial acceleration of gas usage is desired to be kept lower. Imaging your .25 cal airgun delivering a 660m/s 2.5gram bullet out of the barrel.. with the only down side of having to have a 800mm barrel.... I'm waiting for the next big step.
I'd love to see this for the Texan! Fantastic work!
It's the same😂👍
Fkng beautiful breakdown!💓👏👏👏👍👍👍👍👍
Teleskopnya dengan larasnya tterlalu jauh jaraknya, untuk akurasi jauh dekatnya terlalu banyak perhitungannya
If you zero this gun at 50 yards, you can hunt 40 to 60 yards without keeping reticle above the target. If you hunt at more than 60 yards you have to keep the reticle above the target.
_I hope their spring is not making this noise while cocking 😁_
*Nice animation!*
Hahaha, just for background audio effects.
Biết nó từ lâu lắm rồi ạ 😅
Outstanding. I currently own an Air Force Texan SS .457 and I am going to purchase a AF Condor SS .25. The video really helps explain the operation of this platform. Simple and straight forward. Thank You!
i thought these have regulator adjustment on the outside but it seems to be just hammer spring tension.. but i like that the air is coming in a straight line but i would not feel comfortable to hold a 200 bar pressure container against my face :D
Giá bao nhiêu
Nice animations, you just earned yourself a new subscriber.
Very nice good and very good work
Very well done. Is this animation to true scale? I.E, are all the parts in correct proportion to each other?
Thanks for watching this video. This drawing is not made in CAD or 3D software according to parts dimensions. This is simply illustration made in Photoshop.
However I have drawn every parts in photoshop on real pictures.
Hello again, do you have the same animation or drawings for the TEXAN with LEVER loading? I would like to see how the LEVER System works. Many thanks
Sorry I have only animation for Condor SS only.
Great video again 👍😉
Hello sir can you please upload a videos on element max big bore 50 cal i love watching your videos.
im also waiting for this.
👌 👌 perfecto!
Un saludo 👋 de un nuevo subscriptor!
How to mecanism 3 mode single shot, semi-auto, and full-auto?
This air gun is also very popular in Taiwan and I also sell it
😊
Thanx for watching
Do u also selling their spare part, friend?
Please, does anyone have a CAD files of this PCP?
Hello, can you answer my question please?
Shoot out is how many psi?
I can not understand your question. Are you asking about pellet velocity or pressure behind every shot?
ລາຄາເທໄ່າໃດ
Hey great animation. I own a Talon be good if you could show the O-rings inside of the breech (2).
Thanks for watching. There are two o-rings inside the breech slide. I have shown that o-rings. Please watch the video.
My mistake I didn't see them sorry! Too excited watching the video!@@AirGunMech
Good video😮
Hello Could you make videos of these mechanisms from other pcp and gas ram spring rifles hug
Yes. I'll
@@AirGunMech vc e louco
Excelente mecanismo Que Dios te bendiga mucho mi nombre es saůl Cuba
Thank you saul Cuba for watching this video. May God bless you.
Rất sẵn hàng phục vụ ae
Làm về Pcp vixen đi ạ
Do you have detailed drawings? I need this.
Yes, I draw in Photoshop
drive.google.com/file/d/1Ie9HVmIkNEaZliEGI69IY5an2_WxOwou/view?usp=drivesdk
Here is the drawing. Sorry for late reply
@@AirGunMechIs the data in this drawing accurate?
How mush itcoat
Thank bro
Thanks👍👍
How do you fill the bottle ?
ruclips.net/video/Kb56tsqvqMw/видео.htmlsi=RxB4mKFG5cCPpPvz
How does it work in semi and full auto mode? Thanks.
This model is not fully automatic. You have to reload every single pellet.
@@AirGunMech i see. But for any semi/full auto airgun do you think it uses the gush of air from the tank to re-engage the trigger? Maybe something like a gas-operated reloading in firearm?
Hi. I am looking for CO2 DART PROJECTOR rifle, how much is it? Do you have tranquilezer PROJECTOR rifle gun for sale?
Thanx for watching my video. Infect this channel is just for explanation of air gun mechanism. I don't sell airguns.
Mantap 👍👍
Can you do stl for 3D print
No sir this is just 2d animation. I don't make 3d model.
Condo muôn năm 😄
how to buy this gun? and i can buy where?
From which country do belong?
@@AirGunMech việt nam bạn. Làm sao mua
I'm not selling any gun. This channel is just for information. You have to search on internet 'how to buy condor ss in your country"
Làm về fx đi
OK.... 👍👍👍
How much it cost. In india
m.indiamart.com/proddetail/air-force-condor-ss-25-pcp-air-rifle-combo-2851486681297.html
₹ 40,000
图纸可以邮箱发给我一份嘛谢谢我需要这个❤
drive.google.com/file/d/1Ie9HVmIkNEaZliEGI69IY5an2_WxOwou/view?usp=drivesdk
Here is drawing. Sorry for late response
how much the cost of it?
Which country are you from?
@@AirGunMechindia
@@Atupaitea ₹ 40,000
m.indiamart.com/proddetail/air-force-condor-ss-25-pcp-air-rifle-combo-2851486681297.html
@@AirGunMech in va ti to em em.😁
who has the 3d print files😘
สวยงามมากครับ
气怎么会一直有呢？什么原理？
I can't understand what did you write. I translated your comment with Google translate but can't understand
一次充氣就能打幾十發，原理很簡單吧。
Arte top top
Nice video, thanhks
Немного мудрено, но смысл понятен. Автору -👍
Принцип действия понятен, а конструкция ерундовская. Впервую очередь выйдут из строя уплотнительные колечки, отмеченные зелёным цветом, из-за постоянного движения при перезарядке.
Infect O-rings are used in PCP Airguns are highly quality. Which are made up of teflon that can bear rapid movement, pressure and temperature.
@@AirGunMech, колечки, это лишь часть будущих поломок винтовки. В конструкции слишком много подвижных частей. Взять к примеру соединяющую ствол и клапан втулку - при движении к клапану она сходит с направляющей (ствола), а это вызовет неизбежный перекос втулки и заклинивание.
Есть действующий образец этой винтовки? Или она всего-лишь на чертеже?
This drawing is for an existing PCP gun called Condor Ss. Condor SS is a powerful PC airgun. You can check its review on internet. However, the o-rings of every PCP gun need to be changed after one year or as requirement. You are right about distortion of o-rings.
@@user-qf8gk3py3bэто не наихудшее, что может с ней случиться, в классической схеме при большом калибре выходит в основном из строя сам клапан и он, в основном, из капролона при таком раскладе такая система с уплотнительными кольцами и таким клапаном долго не протянет, возможно выстрелов 500-600. Многие мастера отказались уже давно от капролоновых клапанов и вместо них используют шайбы из капролона или чего-то ещё твёрже за капролон, а сам клапан делают из титана или же д16т, таким образом уменьшают вес клапана и увеличивают срок службы клапанной группы, поскольку клапан не разорвёт и не пробьёт штоком.
Top het panjangin coak sedikit atas kasih tabung 2 cm²
mantap 🙏🙏 salam
Walykum salam
Sangat mantap
How much po mga boss
How much it cost?
I don't sell airguns. Please check in your country.
ລາຄາເທົາ່ໄດ່ຄາ່
salam ealaykum ani min aleiraq ani arid aishturi wahdah min dhaniy biman tansahuni p60 lu p35
وعلیکم سلام
لا تستطيع Google ترجمة تعليقك. يرجى الكتابة باللغة الإنجليزية أو بالخط العربي.
THANK YOU
I downloaded the link to the drawing you gave me. But why is there only the appearance map, but not the internal structure and data in the video?
Please open it in Adobe photoshop. You may know that in Adobe Photoshop there is every object is drawn in a separate layer. When you hide the layer on which gun's body is drawn, the internal structure will appear. You should watch tutorial on RUclips about how to hide and unhide layers and how to Click on object to select it and move it in Adobe photoshop,
@@AirGunMechThank you very much, my friend. Do you have detailed data on these other components? Such as size and caliber
No brother. Infect this is a simple Adobe PS illustration type drawing. You know size and dimensions are not the features of Adobe PS. for this type of mechanical drawings AutoCad is used.
Belo vídeos.
👍
评论都是英语我看不懂
Thank you!
Khẩu này bao nhiêu vậy bác
What software did you use to make this ?
Adobe after effects
Show show show
Thật tuyệt vời
This gun has many parts and how this person can make this gun? i am watching the whole video and don't even understand how it works? Am i only person like this?😆
😯😀😀😀please buy this gun and disassemble it. than come to watch again this video. you will be able to understand
11
@@AirGunMech what is the price of this gun sir
lt looked pretty straight forwards to me.
Actually couldnt help but visualise building a magazine/belt fed semi auto w/ 3 rb version.
✌️👍👍👍👍👍👍
Felicitaciones excelente video, faltó la parte de abajo del gatillo desarmar. Cómo sugerencia por favor haga videos asi de los PCP'S más comerciales, HATSAN, SENECA EAGLE CLAW, FX Wildcat e IMPACT, UMAREX HAMMER, Gauntlet ETC... 😊
Thanks for feedback. ❤❤❤
Which part is missing of trigger.?
@@AirGunMech Del Airforce CONDOR. Desarmar como se hizo con la válvula, así mismo desarmar el gatillo y su sistema. Solo como sugerencia. Y subir más videos de otros PCP'S así desarmando.
按照你的逻辑思维，这样的产品，是否可以，按量生产。😂
What device did you use to make this animation?
Adobe after effects
不错不错😊好棒呀(*๓´╰╯`๓)♡
Thank you, nice video ❤
Khẩu nai bao nhiêu
Show 👏👏👏
Exelente aporte
Hi is the size of everything the same as the original one? I measured the safety ball bearing in your video is about 4mm diameter according to the size of other parts, but from other videos of the airforce safety ball bearing ruclips.net/video/Hq6-HU-Mn8k/видео.html&ab_channel=DavyBoone, at 03'01'', the ball looks like 5.5mm or 6mm diameter. I know this does not make a big difference since in DIY one has to adapt to what he gets, but im just asking in case you do know the exact diameter. thanks.
Hi. Thanx for watching. This video is just simple illustration designed in Photoshop. You know in the photoshop the dimensions and measurements are not necessary. The dimensions and measurements are parts of AutoCAD designs. So in this video I just animated the parts of gun in a simple way. I haven't kept in view the exact dimensions and measurements.
ဆတနမအပၾက
Ôô
Iwhant
Шляпа
Стопроцентная!
Ok.đã đăng ký