I haven’t drank in 5 years! My favorite thing about not drinking is not having a hangover 😂 I think I might go the rest of my life without a hangover. That is one of the worst experiences that I’ve been through 1000s of times.
Ah man me too lol. People do it with relationships all the time where they say “I wasted my best years (their 20s or whatever) with this person so I may as well keep going”, when it’s often best to cut your loses, it’s just hard to do
That poor dog is like: "This guy is crazy, he has been talking to himself the whole time. I must keep an eye on him 'cause he might try to steal or something." 🤣
Build a clocking ring for the transfer case. A 1/4 plate steel ring weld studs on the transfer case side and use counter sunck bolts to attach it to the trans. It’ll turn the transfer case down and help with front drive shaft angles
Just realized that my truck is exactly what he was talking about 🤦♂️ my 1985 k10 is the color yellow of the arms and stripped the blue of the post. It's not all that hideous. Kinda grows on ya
I'm not at all into modding trucks, much less a mall crawler/pavement stomper type of truck. I'm a car enthusiast (mostly Japanese) and I'm mostly into circuit racing. With that said, I was raised my whole life in Miami, FL and I enjoyed seeing the mini truck builds and got into a small bit of Lowrider culture and was always fascinated with the the art that went into all those builds. I came across the first video of this truck on RUclips and I gotta say, I like where you're taking this build I think this should be pretty sweet and unique if you can pull it all off. You've got a new sub in me and I'm now invested in your build, lol. I wish you the best of luck, bud. Can't wait for the next update!
Hahah I know, aren’t they entertaining? I have my comments unmoderated so you’ll see it all. In the eyes of the RUclips algorithm a comment is a comment, good or bad, so bring on the hate my ego can handle it lol. Appreciate the kind words from the other half though such as yourself, so thanks!
You can pull the axle tubes and roll the center section up line the king pins up and put the tubes back in and you will have proper pinion angle with working suspension
That suspension link Set up from the get go is a mess and in my opinion should be cut out and thrown in to the scrap pile. Build a drop cradle for a SCS or ProFab style gear Dropbox and put a triangulated 4-link using 1.25” heims and 2”DOM.
Never seen your channel before your gold truck story. Fun vid! Doing what many of us would love to do. Take a terribad sema brodozer and make it into something better.... or worse.
@@kitchenbriks3685 Glad know so much about u joints. Your supposed to run u joints at equal opposite angles for them to work reliably. This is an extremely simple principle to understand but I'm glad u obviously know so much more than every mechanical engineer and mechanic out there.
@@Big-lronholy crap. Before you call someone dumb you really should learn and understand basic grammar. 😂 Hell, I’ll be so nice to even fix your comment “@kitchenbriks3685 Glad to know you understand so much about U-joints. You’re supposed to run U-joints at equal opposite angles for them to work reliably. This is an extremely simple principle to understand, but I’m glad you obviously know so much more than every mechanical engineer and mechanic out there.”
Don't listen to the haters, just do your thing. I am however not in favor of the mini truck lowrider theme. However no one asked for my opinion, so I should STFU. I appreciate your commitment to this rolling SEMA turd. I used to work and sell advertising for Tuckin, Sport Truck and Mini Truckin. Even as an off-road guy, I appreciate the fabrication and creativity of these builds. Keep going and remember it's just money...:).
I love this concept for the build i think minitrucks are woefully underrepresented and underappreciated in the modern car scene, mostly because no one sells small trucks in the us anymore i think this is going to be a super cool homage to the minitruck scene of the early 2000s while making something unique that stands out from both the minitrucking scene and the modern lifted truck scene
There wasn't something in your random storage place to make a ramp to wheel the 30's into the bed of your Truck (The ladder may have even worked) but you got it done with help from a neighbor👍
My friend and I in 1986 we put a tilt bed in his driveway. Got done about midnight. Lol😂🎉we just left the bumper bolted to the bed and used 1 bolt to each side to tilt. 😂
You seem to be doing shit pretty proper. Not that i know my ass from two handfuls of sand (weird quote my father used alot) but you seem to be solving all the problems the proper way.
I did custom patterned paint jobs like that drawing you got its alot of work but it worth it . I owned a body shop for years and did custom paint jobs on lowriders
I'm definitely not a mall crawler/ bro dozer fan but this build looks sick and I'm loving your channel after the shop living video showed up for me. 21k subs seems insanely low for this content.
I’m not a fan either so had to do something different! Thank you I appreciate the kind words! All the name of the game, that number is slowly growing lol
I wonder if the original builders thought hey this truck is always on a lift so why don’t we match the paint to the blue and yellow lift so it’s not as noticeable lol.
@@warwickandrews that’s a cool name for that thing….. flippiflappy9000 I love it…. ….. I have to ask you something…… is John wick a family member? But War Wick it’s much cooler 😎
As far as the no front drive shaft goes, you thing the ones spending all the money to build these "trucks" some one would have made a slip yoke drive shaft with out the splines in the slip joint. But that wouldn't give us the enjoyment of laughing at them. Just a thought.
Well thank you Tyler I appreciate that! I’m working on the 3rd episode in the series now, should be out in the next week or two. Lots of progress getting made!
How do you snap your fingers like that? I use my ring finger too but i gotta keep my middle finger straight an out the way. Looks like you pin your ring finger with the middle? I tried for about 5 minutes and gave up 🤣
Waking up at 5.30 with the hangover from hell to an update on the Sema truck makes it not feel so bad 😂
Glad I can make your Sunday morning a little better lol
Makes sense that this channel's subs would be alcoholics.
Who said anything bout being a alcoholic mentioned one night it's like me calling you a junkie because you made a comment @@DIARRHEA-PANIC
lol basically what I did today 🎉😂
I haven’t drank in 5 years!
My favorite thing about not drinking is not having a hangover 😂
I think I might go the rest of my life without a hangover. That is one of the worst experiences that I’ve been through 1000s of times.
Be very interesting to see the finished product! Can’t wait!!
Clearly Rusty is the one who did all the work! Build is looking awesome!
Sunk cost fallacy- Learned today and do this everyday. Thanks for the lesson!
Ah man me too lol. People do it with relationships all the time where they say “I wasted my best years (their 20s or whatever) with this person so I may as well keep going”, when it’s often best to cut your loses, it’s just hard to do
@@warwickandrews 🤣 oof..
Being a peg leg fan he prolly would hate the truck but he would respect u for building it urself 😂
His latest episode where they’re making fun of the mall crawler in Florida lmao. At the very least he would like Chain Smoker so there’s that
That poor dog is like:
"This guy is crazy, he has been talking to himself the whole time. I must keep an eye on him 'cause he might try to steal or something." 🤣
Build a clocking ring for the transfer case. A 1/4 plate steel ring weld studs on the transfer case side and use counter sunck bolts to attach it to the trans. It’ll turn the transfer case down and help with front drive shaft angles
Previous owner really said "paint it yellow and blue like a 2 post lift"
Just realized that my truck is exactly what he was talking about 🤦♂️ my 1985 k10 is the color yellow of the arms and stripped the blue of the post. It's not all that hideous. Kinda grows on ya
Im so happy to get to see this build fully done
Dude has skillz and drive! Impressive!
I'm not at all into modding trucks, much less a mall crawler/pavement stomper type of truck. I'm a car enthusiast (mostly Japanese) and I'm mostly into circuit racing. With that said, I was raised my whole life in Miami, FL and I enjoyed seeing the mini truck builds and got into a small bit of Lowrider culture and was always fascinated with the the art that went into all those builds. I came across the first video of this truck on RUclips and I gotta say, I like where you're taking this build I think this should be pretty sweet and unique if you can pull it all off. You've got a new sub in me and I'm now invested in your build, lol. I wish you the best of luck, bud. Can't wait for the next update!
Thanks buds, you’re absolutely right the art is amazing in the lowrider scene. Appreciate the kind words!
Never been a fan of Dodge trucks nor trucks on wides, but im loving the series. Cant wait for the finished product.
Amazing work. The front and rear differential angling is different and can’t wait for the finished product!
Wow, you've got a lot of jealous haters in a short period. Glad you're saving that truck, and coming up with your own twist on it.
Hahah I know, aren’t they entertaining? I have my comments unmoderated so you’ll see it all. In the eyes of the RUclips algorithm a comment is a comment, good or bad, so bring on the hate my ego can handle it lol. Appreciate the kind words from the other half though such as yourself, so thanks!
You can pull the axle tubes and roll the center section up line the king pins up and put the tubes back in and you will have proper pinion angle with working suspension
That’s essentially our plan
@@warwickandrews sorry I commented before you explained your fix
This is awesome! Stoked on the vision. Great video.
Can’t wait to see it done!!!!
That suspension link Set up from the get go is a mess and in my opinion should be cut out and thrown in to the scrap pile. Build a drop cradle for a SCS or ProFab style gear Dropbox and put a triangulated 4-link using 1.25” heims and 2”DOM.
Can’t wait to see this truck Going to look badass
excited to see what you got for the future of this truck, i can’t wait for it!
Never seen your channel before your gold truck story. Fun vid! Doing what many of us would love to do. Take a terribad sema brodozer and make it into something better.... or worse.
Hahah one man’s trash is another man’s treasure
I cant wait to see this finished. I loved the mini trucks.
Megaminitruck sounds like a sick project!
YOU NEED A LOWER TCASE stop messing with pinion angle. U joints cannot just run at whatever angle you want.
Glad your a truck expert 😂
@@kitchenbriks3685 Glad know so much about u joints. Your supposed to run u joints at equal opposite angles for them to work reliably. This is an extremely simple principle to understand but I'm glad u obviously know so much more than every mechanical engineer and mechanic out there.
@@Big-lronholy crap. Before you call someone dumb you really should learn and understand basic grammar. 😂
Hell, I’ll be so nice to even fix your comment
“@kitchenbriks3685 Glad to know you understand so much about U-joints. You’re supposed to run U-joints at equal opposite angles for them to work reliably. This is an extremely simple principle to understand, but I’m glad you obviously know so much more than every mechanical engineer and mechanic out there.”
@Dallinz Holy shit we gots us and english teacher hear
Keep up the good work, loving the idea behind this build!
really excited to see the progress, great explanation as well - Cheers from Aus :)
Love the three wheel and bed dancing idea :D
This build is 100% ridiculous and I love it.
I enjoy how hidden the truck was between the trailers😂
All the little added clips are hilarious 😂
I hate the truck lol but you got a sub out of me because im super excited to watch your videos and to see what you do with it. Keep on keepn on man
Subscribed, love the humor and edits
Looking good for what it was, keep up the good work progress
Thanks, will do!
Funny enough, I was just thinking about this truck wondering when the next update would be 😂
Don't listen to the haters, just do your thing. I am however not in favor of the mini truck lowrider theme. However no one asked for my opinion, so I should STFU. I appreciate your commitment to this rolling SEMA turd. I used to work and sell advertising for Tuckin, Sport Truck and Mini Truckin. Even as an off-road guy, I appreciate the fabrication and creativity of these builds. Keep going and remember it's just money...:).
Hahah that was the most rollercoaster of a comment I’ve read in a while but I appreciate your honesty and the kind words
@@warwickandrewsreally it gave me anxiety reading it lol 😅
Going to be awesome when done . I will be watching. Keep up the awesome work
Great work.
Man this came a long way in one video! Epic!
Not here to drag it out and waste your time, rather here to try and tell a good story. All killer, no filler.
I love this concept for the build i think minitrucks are woefully underrepresented and underappreciated in the modern car scene, mostly because no one sells small trucks in the us anymore i think this is going to be a super cool homage to the minitruck scene of the early 2000s while making something unique that stands out from both the minitrucking scene and the modern lifted truck scene
Hell yeah dude glad you see the vision the way I do!
There wasn't something in your random storage place to make a ramp to wheel the 30's into the bed of your Truck (The ladder may have even worked) but you got it done with help from a neighbor👍
Boy math is always on point 😂
That guy WINS in the end
Great progress. I know it’s temporary but I love the black and gold.
My friend and I in 1986 we put a tilt bed in his driveway. Got done about midnight. Lol😂🎉we just left the bumper bolted to the bed and used 1 bolt to each side to tilt. 😂
Everyone leave a Like and comment to make this channel pop up, we need more of this!
Hahah thank you I appreciate that
You seem to be doing shit pretty proper. Not that i know my ass from two handfuls of sand (weird quote my father used alot) but you seem to be solving all the problems the proper way.
I did custom patterned paint jobs like that drawing you got its alot of work but it worth it . I owned a body shop for years and did custom paint jobs on lowriders
Congratulations! Second vid I watched FYI first is obviously the neighbors 😂. You earned it! All the best from Sask!
RIP Scott, such a sad story.
Gotta love Calgary...
Truck should be called Mini Crawler
Rock crawler build/ mini truck build and sounds perfect to me
So funny. Drove past it in McLean before the road was shut down. Was out dirt biking.
Love the build. I built a ram 1500 turbo Hemi.
SUBSCRIBED
No way that’s wild, get any pics? And the turbo Hemi sounds pretty dope how many psi?
Dream living situation honestly. Great videos
Haha it’s funny cause there was definitely two sides to that coin
This is gonna be sick
I love the vision. ❤go baby go.
Okay, as much as I don't like the SEMA mall crawlers, this actually looks like it's going to be pretty cool. Kind of excited to see how it turns out.
Ol'Peg is the most famous Canadian I know.
this needs so much more views great content keep up da good work
I appreciate it!
Can't wait to see this done. I'm just starting a mini truck build.
Awesome man what kinda truck?
@@warwickandrews 1990 b2200
I like the looks of the arch the way it was built originally!
18:53 sick boy dopety dope truck...
Lookin good brother, this is gonna look sick!
Its looking really
Good
great videos bro i’m loving it
I love your golden they seem very sweet
I’ve been waiting for this 😊
I like the new ideas! It's nice to see something completely different. I think the graphics will break up the gold and look much better.
That was my thinking too so I certainly hope so
Wonder if could have welded the axle tubes clocked rotation needed for piñon.
Yep that’s the plan
couldnt you jsut use a dropbox/transfercase combo like mud trucks use to fix the angles?
I'm definitely not a mall crawler/ bro dozer fan but this build looks sick and I'm loving your channel after the shop living video showed up for me. 21k subs seems insanely low for this content.
I’m not a fan either so had to do something different! Thank you I appreciate the kind words! All the name of the game, that number is slowly growing lol
This is amazing 👏
Can't wait to see the final build. It's only gonna age you a couple decades by the looks of what's planned 😂❤
Hahah to be fair the plans I have are from before my time in the auto scene but they are definitely all…heritage ideas for sure
great work on a good truck keep it up
Thanks, will do!
Lowrider lifted truck?!?!? I think I see what you’re doing and I love it !!!!
Hell yeahhh 👌
Ole stunned dump shop dog 😂
Awesome whens part 3? Best video on yt rn
Appreciate it! Started editing it already but have to do so in my spare time so should be coming out in 2-3 weeks
that was a clean forester in the back at 0:48 - 1:00
When you have to lift 33” and 36” those heavy but not that bad
Great video with amazing progress....new sub !!
I wonder if the original builders thought hey this truck is always on a lift so why don’t we match the paint to the blue and yellow lift so it’s not as noticeable lol.
Nice post build Minimega90flippiflappy truck rebuild… but ….. why you don’t build a convertible minimega with a hardtop megacool neverbuild thing…….
Boditriggerfingerflippiflappy9000
@@warwickandrews that’s a cool name for that thing….. flippiflappy9000 I love it…. ….. I have to ask you something…… is John wick a family member? But War Wick it’s much cooler 😎
The only bad thing about this episode is that it ends.
That’s the nicest comment I’ve ever received. Thank you.
Thank you for the epic content, and the humour@@warwickandrews
You had me at zip ties and bias plies.
yes we have got those bikes like 4 ever in finland
Could do a drop box transfer case
There used to be a company that made cv front driveshafts
I would really love that center console
I hate seeing 2nd gens at the scrap yard..
THE BULLET HOLESSSS
Nice Peg shoutout lol. I can hear him now "sick dope sickey dope sick dope kfc bucket rims"
😊😊
The dog will be wielding by next week
As far as the no front drive shaft goes, you thing the ones spending all the money to build these "trucks" some one would have made a slip yoke drive shaft with out the splines in the slip joint. But that wouldn't give us the enjoyment of laughing at them. Just a thought.
But hey I'm no engineer.
Please make more videos bro i love you vids so much
Well thank you Tyler I appreciate that! I’m working on the 3rd episode in the series now, should be out in the next week or two. Lots of progress getting made!
@@warwickandrews hell yea can’t wait for the new vid
Welcome to the air bag cnc lift kit World it's wayy harder then it looks 👌 😅
Lord I could use that 6.7 and wiring harness 😂
No way this guy’s in alberta… dude how is there a SEMA truck in MY province?
This is bad ass
I'd love to work with you on these projects.
How do you snap your fingers like that? I use my ring finger too but i gotta keep my middle finger straight an out the way. Looks like you pin your ring finger with the middle? I tried for about 5 minutes and gave up 🤣
Hahah I’ve never really thought about it just always done it that way
im sorry, *SHOT?*
we have Detroit now? XD
Badass!