How To Remove Balance Shafts | FIAT COUPE, LANCIA DELTA

Welcome to a new series of How to videos. In this episode I try to explain how to remove the balance shafts on my engine. This engine is shared with multiple cars like the Lancia Delta and Kappa aswell as the Alfa Romeo 155 q4.
The kit I use is from PROJOE.
End caps:
projoe.nl/prod...
Wide Idle bearing:
projoe.nl/prod...
Oil port blocking kit:
projoe.nl/prod...
Please keep in mind that this job is not a beginner level mod and requires some technical knowledge and a variaty of tools. If you do this yourself it is at your own risk!
If you have questions about this mod then let me know!
if you don't want to miss future upgrades, make sure to subscribe and turn on your notifications!
Check out the previous video:
• FIAT COUPE 16V TURBO RESTORATION | EN...
Follow us on:
FACEBOOK - / jtscustomsnl
INSTAGRAM - / joey_jts_cu. .
WEBSITE - jtscustoms.nl/
Fiat Coupe Build
Fiat Coupe Restoration
Fiat Coupe 16VT Lancia Kappa intake
Balance shaft removal

[@jeffgamer1979]

Hello, congratulations on the excellent video! I'm in Brazil and I was looking for a video like yours, and I have a doubt, since I'm far away, I need to cover the oil gallery, I was thinking about placing the piece itself with Loctite, with the holes outside the gallery location , keeping in mind that the smooth part of the bushing would block the oil passage. Do you believe this could work? Thank you very much in advance!

[@jtscustomsNL]

Thank you very much! I would not advice to do that, you will need to hammer them out and you can garantee that it will seal correctly. You can buy the kit at Projoe.com

[@icsunonova]

niet gelijk de brede tandsnaar kit?

[@jtscustomsNL]

Zeker! Die zit er nu ook op! Zie volgende filmpje😅