Hope you got the answer to my question, I'm debating on buying an older 288 off marketplace that's got low hours and been very well-maintained over the years vs a brand new 585xp... They rave about older saw being indestructible, they don't build them like that anymore, but does that mean today's saws with all the electronics and auto tuning are just not designed to last? New would probably cost twice as much but not sure if buying an older saw is gonna turn into a money pit down the road... Aside from that, performance wise, how do older saws in general compare to today's? Sorry I'm asking a lot of questions but it's always best to get educated first before making a decision. Thanks in advance and hope to hear from ya!
Are you focused more on a 288 or an older saw? A couple more questions you should probably ask yourself is what do you really need and are you going to take it to a shop or fix it yourself if something goes wrong. Are some things just not made to last thing they used to be? Sure. Are the 288 or 281 saws indestructible? Definitely not. Like you say, is the 288 going to turn into a money pit? Both saws should produce close to the same power, but I bet the 288 might have more torque. I don't know that saying the new saws aren't designed to last is accurate, there are several that are strong runners......they're just made differently. Mechanically the 288 is much simpler. I don't really have any experience with the new 585's, but with a new saw you at least know what you're getting(for the most part). If anything does go wrong early on at least it is on warranty. A new 585 is going to have a much better anti-vibration system! This is kind of the timeless old versus new question and I could keep going, but to prevent a wall of text I will stop here. Can't really sum up a real solid comparison between the old and the new in just a few sentences. Maybe someone with more experience with a 585 might chime in.
I would take the 288 the 200 series feel light for their displacement and are as simple as a saw can get. You can replace just about anything in half an hour oil seals can be done easily without splitting case. The 200 series huskies some of my favorite saws just for the performance and simplicity plus with clones on the market at very worst there will always be cheap parts and with 288xp still made in Brazil lot of new oem parts available.
o machado e a motosserra (the axe and the chainsaw) eli silva & zé goiano composição: moacir dos santos / zé goiano o machado e a motosserra tiveram uma discussão motosserra diz que é orgulho da evolução machado pra mim já era pois vem do tempo de adão você agora só serve pra fazer calo na mão motosserra dá um ronco relou o dente no tronco já se vê o pau no chão a serra chamou o machado pra fazer uma porfia machado aceitou na hora e quando chegou o dia entraram junto no mato pra mostrar a serventia a motosserra roncava machado velho tinia e naquele matagal foi só cavaco de pau pó de serra que subia e esse grande duelo deste jeito é que termina na briga das ferramentas o machado é que domina motosserra parou cedo ali no tronco da quina machado seguiu cortando mata grossa e mata fina motosserra impotente rebentou sua corrente acabou a gasolina que isto sirva de exemplo para toda humanidade e você que é tão jovem tem que saber a verdade respeite bem os mais velhos não brinque com sua idade uma pessoa idosa também tem utilidade é um diamante valioso se não tivesse o idoso não teria mocidade
That saw sounds wicked 🙂👍
Hell of a saw.... and they don’t feel as heavy as you’d think.
I just bought my first 288, it has a few minor issues but it will run again. These are becoming rare unicorns, I had been searching for years already.
Saws running strong
This saw have a little ported cylinder, and little carburetor setup. Nice toy.
Hope you got the answer to my question, I'm debating on buying an older 288 off marketplace that's got low hours and been very well-maintained over the years vs a brand new 585xp... They rave about older saw being indestructible, they don't build them like that anymore, but does that mean today's saws with all the electronics and auto tuning are just not designed to last? New would probably cost twice as much but not sure if buying an older saw is gonna turn into a money pit down the road...
Aside from that, performance wise, how do older saws in general compare to today's? Sorry I'm asking a lot of questions but it's always best to get educated first before making a decision.
Thanks in advance and hope to hear from ya!
Are you focused more on a 288 or an older saw? A couple more questions you should probably ask yourself is what do you really need and are you going to take it to a shop or fix it yourself if something goes wrong. Are some things just not made to last thing they used to be? Sure. Are the 288 or 281 saws indestructible? Definitely not. Like you say, is the 288 going to turn into a money pit? Both saws should produce close to the same power, but I bet the 288 might have more torque. I don't know that saying the new saws aren't designed to last is accurate, there are several that are strong runners......they're just made differently. Mechanically the 288 is much simpler. I don't really have any experience with the new 585's, but with a new saw you at least know what you're getting(for the most part). If anything does go wrong early on at least it is on warranty. A new 585 is going to have a much better anti-vibration system! This is kind of the timeless old versus new question and I could keep going, but to prevent a wall of text I will stop here. Can't really sum up a real solid comparison between the old and the new in just a few sentences. Maybe someone with more experience with a 585 might chime in.
I would take the 288 the 200 series feel light for their displacement and are as simple as a saw can get. You can replace just about anything in half an hour oil seals can be done easily without splitting case. The 200 series huskies some of my favorite saws just for the performance and simplicity plus with clones on the market at very worst there will always be cheap parts and with 288xp still made in Brazil lot of new oem parts available.
engine start on 1:25
Good size to cut up for fire wood
It shud rip.. its a husky.. I run a 372xp and it screams there any tree
Cuales son los pasos para prender la
o machado e a motosserra (the axe and the chainsaw)
eli silva & zé goiano
composição: moacir dos santos / zé goiano
o machado e a motosserra tiveram uma discussão
motosserra diz que é orgulho da evolução
machado pra mim já era pois vem do tempo de adão
você agora só serve pra fazer calo na mão
motosserra dá um ronco relou o dente no tronco já se vê o pau no chão
a serra chamou o machado pra fazer uma porfia
machado aceitou na hora e quando chegou o dia
entraram junto no mato pra mostrar a serventia
a motosserra roncava machado velho tinia
e naquele matagal foi só cavaco de pau pó de serra que subia
e esse grande duelo deste jeito é que termina
na briga das ferramentas o machado é que domina
motosserra parou cedo ali no tronco da quina
machado seguiu cortando mata grossa e mata fina
motosserra impotente rebentou sua corrente acabou a gasolina
que isto sirva de exemplo para toda humanidade e você que é tão jovem tem que saber a verdade respeite bem os mais velhos não brinque com sua idade uma pessoa idosa também tem utilidade é um diamante valioso se não tivesse o idoso não teria mocidade
Wanna sell that wrap handlebar?