Piaggio Beverly 200 starting problem / carburetor / CVT / maintenance / önindító / karburátor / szíj

Поделиться
HTML-код
  • Опубликовано: 1 фев 2025

Комментарии • 18

  • @denyB18
    @denyB18 Месяц назад +1

    So you have only tightened the pulley nut a bit and the free play was gone? (10:00 min)
    Thank you for the video, it's really helpful.
    Cheers and wish you all the best in New year.

    • @latzkoworks
      @latzkoworks  Месяц назад

      Yes, first dismounted, checked all the parts, then take together. Notice the up and down order of the round springs. In my case the nut was simply loose. Have a happy new year, cheers from Hungary!

    • @denyB18
      @denyB18 29 дней назад

      ​@@latzkoworksJust finished my Beverly, everything is working like new. Thank you neighbour, greetings from Croatia 🍻

  • @yacintreaugustediatta4071
    @yacintreaugustediatta4071 9 месяцев назад +2

    Well done 👍🏾 I have one but she has a lot of problems 😢I have to change the motor to bye a new one imported and I don’t now if he fit

  • @denyB18
    @denyB18 Месяц назад +1

    2,5 turns out from full in?? 24:44 min

    • @latzkoworks
      @latzkoworks  Месяц назад +1

      Hello, yes, basically, but after start and a few minutes running (warm engine) you coud adjust it if needed.

    • @denyB18
      @denyB18 Месяц назад +1

      ​@@latzkoworks thank you for your answer. When I bought skuter couple of days ago it was running very poorly for 200 ccm. I have rebuilt carb and found out that fuel mixture screw was completely full in. After rebuilding the carburetor I set it to 2,5 turn but spark plug was fouled soon and then engine won't start again. After setting it to 1.5 from full in it starts and goes great. I will check the condition off spark plug after 100 km or so.

  • @tiborbolla1950
    @tiborbolla1950 4 месяца назад +1

    Üdv érdeklődnék hogy adott egy Piaggio liberty 200 as, akksi 12.v 11 ah.biztositek 15 ah kell bele vagy 20 ah,? Mert midegyiknek a muanyag házát elolvasza de a motor működik rendesen

    • @latzkoworks
      @latzkoworks  4 месяца назад

      Szia, általában 30A szokott lenni, de javaslom az elektromos rendszer átvizsgálását.

  • @m.om.o4893
    @m.om.o4893 9 месяцев назад +2

    bel lavoro ma i rulli e il variatore non vanno mai ingrassati

  • @emil7705
    @emil7705 9 месяцев назад +2

    Piaggio beverly 200, miert folyik az olaj bele a levegoszurobe? Az olaj szint az tokeletes

    • @latzkoworks
      @latzkoworks  9 месяцев назад

      Valamennyi mindig belefolyik. Ha túl nagy a kartergáz, tehát kopott a motor akkor többet nyom bele.

    • @emil7705
      @emil7705 9 месяцев назад +1

      @@latzkoworks tehat akkor dugattyu csere?

    • @latzkoworks
      @latzkoworks  9 месяцев назад

      @@emil7705 először mérj komptessziót, szelephézagokat is nézd meg. Ha kopott a motor akkor hengerfúrás + dugattyú csere. Ezeknél gyakori.

    • @emil7705
      @emil7705 9 месяцев назад

      @@latzkoworks koszonom szepen a segitseget, sok sikert a tovabbiakban!

    • @latzkoworks
      @latzkoworks  9 месяцев назад

      @@emil7705 köszönöm, sok sikert neked is!

  • @tiboralbert7277
    @tiboralbert7277 Год назад

    Mester munka,amilyen tisztasággal és precizitással dolgozol.