How to make Converter 220v power to 3v-6v-9v-12v-24v-48v-98v-120v.
HTML-код
- Опубликовано: 27 янв 2025
- How to Make a Converter: 220V Power to 3V, 6V, 9V, 12V, 24V, 48V, 98V, and 120V | DIY Voltage Converter
In this video, I’ll show you how to build a versatile voltage converter that steps down 220V AC power to various DC voltages, including 3V, 6V, 9V, 12V, 24V, 48V, 98V, and 120V! This project is perfect for anyone who needs a custom power supply for electronics, appliances, or testing purposes. Follow along to learn the step-by-step process of creating a multi-voltage converter, using simple and easily available components.
You’ll learn:
Components required for creating a multi-voltage power supply
How to safely step down from 220V to various DC voltages
Techniques for regulating and switching between different output voltages
Safety tips for handling high-voltage power
This project is ideal for electronics enthusiasts, hobbyists, or anyone working with multi-voltage devices. Don’t forget to like, comment, and subscribe for more DIY power supply projects and electronics tutorials!
#VoltageConverter #DIYPowerSupply #220VtoDC #MultiVoltage #ElectronicsProject #PowerConversion #DIYElectronics #StepDownConverter
Direct Voltage Drop From 220v to 3v-6v-9v-12v-24v-48v-98v-120v #how #to #make #ac dc converter
This circuit uses a direct power source that is not isolated be careful, thanks for watching the video #wt_fix #how #hindi #howto #trending #viral #repair #voltage
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Good project....clean your soldering iron tip,use good quality solder wire
Thanks 🙏😍, please subscribe to my channel 🥹
SO, with enough solder, no flux, and a never been cleaned iron... There will end up being enough solder (mass) to have it's own gravity. One day I too shall be a professional.
Super
මරු මරු 🤩😃
👍
the voltage source is galvanically connected to the network, it is life-threatening.
Good video
Thanks
Hello, can a 12v 0.50A cooling fan be operated for a long time with this circuit?
no, actually it is not a volt converter, simply provides the necessary current for 3 Volt, 6 Volt etc LED arrays....your motor is a 6 watt motor, the used resistors are of much lower wattage, they will be burned out
You could sell this kind of video as art in west . One love
Thanks for your comment my brother 😍 😘
My cooking channel-youtube.com/@wkitchen-oi9oz?si=s0j3mQGhgORoZEKH
Good video but very ugly soldering. You have to use clean, new components or have to clean wires and pins of the components. We noticed one dry joint while soldering. And when you do such video please make it clean and tidy as the viewers are going to follow you. Anyway thank you for the theory part.
Ok thanks your comment❤️
Super surcuit 🥰❤️
Well done.
Thanx 😘
සුපිරි ❤️😇
😘
Kaun sa R kahan lage ga, uska W kya ho ga, PF network (cct) me shock ka khatra part ka -- +,direction etc batana zaroori hota hai. Soldering nahi ho pa rahi thi to kuch high W ka iron use karte ya jab V badhta tab shoot karte. Cct achha hai. Blessings.
Good vidio 👍
схема работает лайк и подписка однозначно .хорошая работа.
Good vedio
Good
Lujhe 2.5v ke lamp ki 5o bulb ki series ka driver banana hai PF circuit bataye
Super vedio
muy buen video gracias
Thanks brother 😘
Super
🌼
Output DC mein kitna value ka resistor lagaya hai
How much amp output?
Current intensity
Superb
Thanks 🤗
Amp kitna dega output
𝙂𝙊𝙊𝘿 𝙫𝙞𝙙𝙚𝙤😃
❤
¿Cuanto tiempo tarda en tostar los leds para poderlos tomar con un café con pastas?
GOOD VIDEO
super
Thanks
Brother ye max kitne watt dega ?? Dc fan ko lganai k loyea bnana h any tip ?
👍
Elm❤️
thank you
😘😘😘😘
ok nice idea but this kind of transformerlerss PSU is not suitable for all purposes, is dangerous playing with high Voltages and your solderings need a lot of improvement.. Really bro go get a nice soldering iron this is gets hillarious and watching young amateurs shame!!!!!. you may find good solderin irons in the market from few euros. The tip of this soldering iron you use has no more attaching material and the soldering gets painful
I accept what you say
When I made this video my soldering machine was not working so I made this circuit with my dc soldering and this is my first video and I will make future videos well.♥️
@@wtfix8301 then my friend wish you the best for you and your try....
Thanks my brother 🤗♥️
Can we use 105J np cap and what will be output voltage as I have lots of these caps.
👍👍
Saran saja soldernya pakai yg benar" panasnya di sesuaikan biar timahnya bisa meleleh dengan sempurna
Thanks for your comment
Your video is encouraging but it does not give the Output voltage, amperage, wattage etc; and applicable objects.
that is because he does not know
Output to ek hi milega. Phir itna sara cheej kaise chalega
It is work
woow
Bina regulator ke
variable voltage milega kaise
මට මේ cuircuit එකෙන් 48v fan ekak weda karanna puluwn weida.(200 mili ampiyar)
Good working 👍
Thanks 👍
@@wtfix8301 How many watts are in 420 ohm resistor?
😍😍💪
👍
24 volt ka circuit kese bavave
Çok zor çalışıyor. Pasta kullanmıyor
You actually got a flexible voltage by limiting the current, but my question is what is the final output amp in this circuit? Did you measure? Can you start a 24V 3A DC motor?
practical max is 100mA
@@kennmossman8701 👍♨️
What's the value of that output resistor?
420 ohm 1w resistor
♥️🌷♥️Aap ko tajurbay ke Jarurat hai.If you don't mind OK🌷🌷
👍👍👍👍👍👍👍👌👌👌👌👌👌👌♥️♥️♥️♥️♥️
для этого дела флюс надо!
Hello. I connect a 2W 460 ohm resistor to the output of the circuit and it gets hot. How many watts and how many ohms of resistors can be connected?
Check video
Can i use it to run 4V motor
Light only bro
it is work
Can we use resistor 560k, 1/2 W?
Ok try
Is it possible to operate with 12 battery with relay connection
❤🌼
Pls. Use breadboard
Мляяя как так паять😂😂😂😂
Over the time amp encreases
How many watts are in a 420 ohm resistor?
Excelente demostración cual es el valor de la resistencia
Mere bhai kiya aap abhi seekh rahe hai
I'm having trouble understanding what you're asking
अल्लाह के अलावा कोई भगवान नहीं है, मुहम्मद अल्लाह के दूत हैं
मैं आपको इस्लाम में आमंत्रित करता हूं
Phooh !
Yeah, nah.
up ka work bad
Tá sem pegar solda
2 amp output milegs
🌼🙂
That was great thanks.
Brother, your soldering work is very dirty. You should know first how to solder correctly. Then observe electrical safety . Your work is dangerous and it may give you fatal electric shock. I am most religionless .But I love Great Buddha. Please take my rude comment sportingly.
First of all thank you for your comment. This is my first video. My soldering iron was broken so I soldered with another dc soldering iron I had. .I admit that it was not done correctly. But I have fixed that mistake in my other videos
OK
отрорвите ему руки гениально насрал
Es copia de otro video, pero en plan super-chapucero
Parts
check full video brother❤
Ещё тот паяльщик.
Poor soldering technique
Can’t see any of your videos, please point me to the direction of your work. 😅
Lol. He solders a joint of 3 leads, 4 times, and then can still move 1 of the leads by touching it.
Vai ater 120
Massaroca
U r weak at soldering.
🙄
Irrelevant and noisy Play black hate that
I invite you to Islam
There is no God but Allah, Muhammad is the Messenger of Allah
Eu convido você para o Islã
Não há Deus senão Alá, Muhammad é o Mensageiro de Alá
Я приглашаю вас в Ислам
Нет Бога, кроме Аллаха, Мухаммад - Посланник Аллаха
我邀請你加入伊斯蘭教
除安拉外，別無上帝，穆罕默德是安拉的使者
Brother i am buddhist
How to cold solder with shitty but still working connections. Gg.
I have collected a copy! -- 2 capacitors 450v - 105, 150k between them to discharge these capacitances,I put them on a diode bridge change, supplied 220 volts from the other ends, put a barrel capacitor 450volt 12mkf from the diode constant to plus and minus, 150k between it for discharge, then put a load current resistance of 100 ohms to the plus of the diode bridge and I connected the LEDs - they just blew up! I looked at the output voltage -- 440 volts constant! YOUR SCHEME IS INITIALLY DIFFERENT FROM YOUR OWN ASSEMBLY! NOW ANSWER ME -- EITHER YOU'RE LYING OR WHAT DID I DO WRONG? LOOK AT YOUR DIAGRAM! -- IT HAS A RESISTANCE OF 100 OHMS TO THE CAPACITOR!What if I had connected to the digital probe? -- he would have burned down!The scheme of Zafer Yaldis (and the comment to him) is almost no different from yours! you measure the output voltage and current consumption! And where is the guarantee THAT YOU ARE APPLYING 220 VOLTS TO THE CIRCUIT? WHY DIDN'T YOU SHOW ANYTHING?
Have you made any mistake while creating this. I only use the parts that apply to this. I have not submitted fake videos. I have submitted this because I made it and it works. Also, it outputs like 120v and the voltage of the light that is connected to it. Aran works
Draw a model of what you have made on a paper and name it and comment a picture
Good
Thanks
Super
❤
🌼
මට මේ cuircuit එකෙන් 48v fan ekak weda karanna puluwn weida.(200 mili ampiyar)
yes
👍
❤
🌼
Good
❤
🌼
❤
🌼