Convert

Hello friends, today in this video I have shown you
how to make a 220v AC to 3v-6v-9v-12v-24v-36v
-48v-60v-98v-110v-120v.DC driver circuit,
How to make 220v to 1.5v-3v-6v-9v-12v-15v-24v multi output converter,
Convert #220v ac to 3v,6v,9v,12v,24v,36v,48v,60v,98v,110v,120v DC Led driver,
DC converter without transformer Please note, this circuit is not isolated from mains so don’t touch any open wire in this circuit when the circuit is plugged in.It will be dengerous for you if you have not any knowledge about electronics and electrical engineering।
If you want to increase the brightness of the led use 30W,40W & high led and 47uf ceramic capacitor in place of 15uf. This capacitor must be rated 400v or above.
Thank you very much for watching
Have a great day ❣️
Friends if the video is really helpful please Like Share 🙏 please don't forget to Subscribe the channel.
Thank You...
*************Ultimate Electronics*************

[@CathySiegert]

I'm impressed: The first guy using shrink tubes and safety hints on screen. Its a dangerous circuit and not for beginner. Change the 100ohm 2watts to a cement 5watt 120ohm resistor would be a good improvement.

[@UltimateElectronics]

Oh! Thanks for good information ❤️

[@TimothyHarris-tn4fo]

That must be fun building that I'm surprised that the resistor didn't get hot when trying the big LED strip many happy returns

[@UltimateElectronics]

Thanks for watching

[@RajendraSamant-d7o]

I want to connect 5 uv 5mm led in series for at least 6-7 hours. Will this circuit will work continuously for long time duration.

[@UltimateElectronics]

Yes you can but you should change the output section capacitor, Thanks for watching 🙏

[@MdAlifRaj-qx1py]

Vai kohob valo and My important vidio❤❤❤❤❤❤❤❤❤❤

[@UltimateElectronics]

THANK YOU SIR

[@MdAlifRaj-qx1py]

Thangks

[@Antimente_wotb]

Es idea mía o la resistencia de salida se te está quemando?

[@UltimateElectronics]

The resistor in the output section heated but did not burn out .Thanks for your valuable feedback.

[@RixtronixLAB]

Creative video, keep it up,thank you :)

[@UltimateElectronics]

Thank you sir

[@dengudwin8435]

к концу не длительных экспериментов резистор который на плюсовом красном проводе припаян уже заметно подгорел и начал обугливаться, а что с ним станет при длительном использовании такого драйвера?

[@UltimateElectronics]

Thanks for watching sir you can avoid the Resistor the circuit runs smoothly

[@kangmabreb_2258]

buat suplay kipas 12v DC kira2 aman nggak kak

[@UltimateElectronics]

Yes sir you can use it for 12 volt fan but the circuit is not isolated be careful with proper cover the circuit

[@HeathenGeek]

That 100k resister is getting blacker and blacker 🙄
Thank you for sharing this 🙂

[@UltimateElectronics]

Thank you

[@StudentLife-vr5hd]

Please test how many amperes it is, I am requesting a lot

[@UltimateElectronics]

Only up to 500mili apms output. Thanks for watching sir 🙏

[@SudhirSamaya]

अच्छा लगा 😅

[@UltimateElectronics]

Thank you

[@bukaaja1764]

👍👍👍

[@UltimateElectronics]

Thank you

[@gokhanyildiz9962]

This is not work in 48v 8a hov should i do for use in 48v 8a

[@UltimateElectronics]

This is an auto volt converter circuit only used for led light or any other lighting system and its amps are too low like 500mili amps so it does not work 8 amps circuit . Thanks for watching 🙏

[@gokhanyildiz9962]

@@UltimateElectronics ok but do you know how can i convert to 48v 8amps

[@manuelrocaenlaelectronica9029]

La resistencia que va. Con el condensador en serie . Al positivo se calienta .cambia por una menos valor y mas vatiaje

[@UltimateElectronics]

Thanks for watching

[@alpeshdave4296]

Bhai is se battery bhi charge kar sakte hai kya

[@UltimateElectronics]

Kar sakte ho lekin isme shock lag sakta ha charge karte samoy khula chor Dena hai or isme charge hone me time jada lagta hai bohut jald 220v ac se battery charger vi banaunga thank you bro

[@ravidesai1554]

output current kita aata hai sir 🙏🙏🙏

[@UltimateElectronics]

Upto 500mili amp ! Thanks for watching sir

[@sanjaykhurana3400]

रिजस्टर. 1 मेगा। लगया। को. उसकी..जानकारी। दिखाओ..

[@UltimateElectronics]

Thanks for watching sir

[@sanjaykhurana3400]

पिएफ मे 1 मेगा। रिजस्टर.लगाने से. बताओ..

[@UltimateElectronics]

To discharge fast, Thanks for watching sir

[@Abdo-w2o]

هل يمكن أن نتعرض للصعق من المخرج Dc

[@UltimateElectronics]

Sir this circuit is not isolated so it is possible to get electric shock

[@Abdo-w2o]

@@UltimateElectronics
هل يمكن استخدامها كجهاز اختبار الليد... testr leds

[@chamindapiyarathna7415]

Circuit Diagram Please..! 😊

[@UltimateElectronics]

Please see the full video every thing is clear to make circuit diagran

[@wasilyok090662]

Почему подгорел резистор на 100 Ом?

[@UltimateElectronics]

No sir due to resistivity of the resistance it is heat during flow of current so the resistance generates some heat but it is normal

[@chandramohanmadhuni7371]

Resistance condenser ki value to bataya karain music na bajain

[@UltimateElectronics]

Thanks for your valuable comments 🙏

[@RicardoGutierrez-yc5bc]

Nesecito lista de materiale

[@RicardoGutierrez-yc5bc]

Enviar por esta via

[@UltimateElectronics]

Thanks for watching

[@umeshkamble41]

Part ki value show karna chahiye

[@UltimateElectronics]

Show Kiya video me dekhiye sir thanks for watching

[@TTND2008]

The 100 ohm resistor seems to have burned out while testing the 3v LED

[@UltimateElectronics]

Don't worry it is working

[@SubodhChakraborty-kg3jn]

3 volt .to 250 volt led light testar Ka jorurat jai .

[@UltimateElectronics]

THANKS FOR WATCHING

[@UltimateElectronics]

OK SIR I WILL TRY OR BEST TO MAKE 3V TO 250V LED DRIVER

[@moumitasett5102]

First of all it is not 22 ohm its 2.2ohm resistor

[@UltimateElectronics]

Good Thanks for watching plz see the full video

[@sarvansingh5564]

12v mother

[@UltimateElectronics]

Thanks for watching

[@andikwidodo9697]

100 ohm burned

[@UltimateElectronics]

Don't worry sir avoid this 100 Ohms without 100 ohms circuit will run smoothly but you can also used 10/22 ohms 1w resistor