Brad, I just wanted to comment that I have been putting off replacing my WHOLE rear glass, UNTIL, I saw your video on how easy it is to change the center slider. Bro, this was so easy and I had no clue. Thank you for these videos! keep up the excellent editing. lol.. I know good help is hard to find.. I'm just messing, she did a great job too. Thanks again!
Bought brads replacement panel for my 3rd gen ram and brad is very friendly and answers your phone calls . i installed the panel and i couldnt be happier .
I have the same problem. I would like to know if it is advisable to remove all the pieces of glass. If I can remove it, will the glue add without a problem?
Do not deviate from the program we glue to the broken glass for many reasons which I will not go into. The best job will be achieved by following the directions as prescribed in the video do not think that you can outsmart me by removing all the broken glass it will ruin the appearance of the job when completed there's a reason why I've done this and created a video to help you get the best possible outcome from our product please follow the directions
It looks like you mount the glass over a portion of broken glass.. like you knocked out the middle but left the edge. Is this what I’m seeing? Is that to make up the thickness and get the glass in the same plane??
to your first question yes that is what you're seeing to your second question no it's not going to make up any thickness it's going to be an obvious repair it's just the only way to do it on these trucks if there was a better way I would have done it watch video in its entirety thanks brent
I just broke out the same window you just replaced. I was told I have to replace the entire back glass both sides. But your video suggests I don't. I'm in Kentucky. What would something like that cost me to replace just the left side .
Please go to our website: bradsautoglass.com Once you select your part please be sure to read the entire item description and scroll down the page to the installation video. THANKS
@@autoglassamerica Thanks. Was helping my dad move his stuff and something rolled into the window. Blew me away how easily the window spidered. My daughter rides in the back and I need to get it safe and secure again. Been driving around with cardboard taped over it the last month.
maybe you could teach this to other glass companies that want to charge over $600 to replace the whole window.
The videos are here for all to see
@@autoglassamerica Which urethane do I need to use? Can I get it from Lowe’s?
@@HXD90 No. You need to purchase from your local auto parts store or you can find it on our website bradsautoglass.com
Perfecto Thank you like you video
Brad, I just wanted to comment that I have been putting off replacing my WHOLE rear glass, UNTIL, I saw your video on how easy it is to change the center slider. Bro, this was so easy and I had no clue. Thank you for these videos! keep up the excellent editing. lol.. I know good help is hard to find.. I'm just messing, she did a great job too. Thanks again!
Thanks for this! I just broke my passenger side when I messed up with a piece of firewood. I’m glad to have found your video.
You're welcome!
Bought brads replacement panel for my 3rd gen ram and brad is very friendly and answers your phone calls . i installed the panel and i couldnt be happier .
Has it been good?
Thanks you you saved me $700 on my old ram 1500 .
Where did you get the glass from
Brad'sautoglass.com.
Wow I feel really stupid for trying to replace the whole thing out when all I needed was this piece of info with the right tools to get it going !!
I have the same problem. I would like to know if it is advisable to remove all the pieces of glass. If I can remove it, will the glue add without a problem?
Do not deviate from the program we glue to the broken glass for many reasons which I will not go into. The best job will be achieved by following the directions as prescribed in the video do not think that you can outsmart me by removing all the broken glass it will ruin the appearance of the job when completed there's a reason why I've done this and created a video to help you get the best possible outcome from our product please follow the directions
It looks like you mount the glass over a portion of broken glass.. like you knocked out the middle but left the edge. Is this what I’m seeing? Is that to make up the thickness and get the glass in the same plane??
to your first question yes that is what you're seeing to your second question no it's not going to make up any thickness it's going to be an obvious repair it's just the only way to do it on these trucks if there was a better way I would have done it watch video in its entirety thanks brent
@@autoglassamerica ok. Thanks appreciate it!!
How long for eurethane to set?
On passenger side should I trim the thickness of the gasket?
24 hours for the urethane to cure at 60 degrees Fahrenheit. Moisture speeds it up. Desert slows it down.
I just broke out the same window you just replaced. I was told I have to replace the entire back glass both sides. But your video suggests I don't. I'm in Kentucky. What would something like that cost me to replace just the left side .
Please go to our website: bradsautoglass.com
Once you select your part please be sure to read the entire item description and scroll down the page to the installation video.
THANKS
Does the replacement panel come with the factory tint?
Yes just like factory
How can I get the back passenger side window??
bradsautoglass.com
Do you have these replacement 1/4 glass for a 2000 ram 3500. Mine has the 2 window slider.
Sorry unfortunately we do not
you have driver side rear sliding glass 2002 dodge ram 1500 quad cab?
Yes if you have a factory three window will not fit four window slider
bradsautoglass.com/
Yes can be purchased at bradsautoglass.com
do you have a video to do the driver's side rear in a 2013 Dodge ram 1500? powerslide
ruclips.net/video/WD6arHeCbFM/видео.html
The same technique applies to your 2013 dodge ram sliding rear window If you need assistance please contact me at 231263 33OO
What is the cure time on the urethane?
24 hours minimum
I'm going over to ebay to look for your kit. Your the same name over there, Brad's auto glass? Guess I'm asking how to find your kit.
Please go to our website. Bradsautoglass.com
@@autoglassamerica Thanks. Was helping my dad move his stuff and something rolled into the window. Blew me away how easily the window spidered. My daughter rides in the back and I need to get it safe and secure again. Been driving around with cardboard taped over it the last month.
I got a 06 ram with the power slide is it the same process
Yes
How much for the rubber peace and do you have and the glass
The rubber comes with the glass we sell on our website. Here is the link to that part. bradsautoglass.com/2003-2008/
Brad Finkbeiner how much for the window it's the same side as in your video and it comes with the rubber
In my previous comment I gave the link for this part on our website please go there to shop for this part. Also the rubber is supplied with the part.
This is not a good way to do it. The right way is replacing the hole thing. I know even the sliders
This gentleman is not wrong if you don't mind spending 800 to $1000
Thank you so much I will buy 👌 I was thinking replacing but I know there could've been a patch panel do you have the link to get this one exactly .?
Go to our website: bradsautoglass.com and follow the prompts for the Dodge Ram
Great job 👏
Hi, do have one video for right side? Thanks
the installation video is the same for both the left side and the right side glass
It is the same
You have two different videos on here , one looks easy and the other one looks difficult.....what gives here ????
You should call Technical Support on Monday. Bradsautoglass.com.
Repair let side window ram dodge 1500
The ebay pieces for these are from you? They are legit?
100%
Hi, can you give me the part number of this Windows? left and rigth
Please go to bradsautoglass.com
How to remove back window in a dodge ram 1500
cool
A 06
Great job! Thanks!
I have that same problem today n I really enjoyed this video
Thank you please subscribe and give a thumbs up