A6 C5 Rear Parking Sensor Loom , Module and Buzzer removal - How-to
HTML-код
- Опубликовано: 27 авг 2024
- How To remove rear Parking Sensor Loom , ECU/Module and Buzzer on the AUDI A6 C5 (Avant and Allroad)
Video shows the removal of the items, refitting is just the reverse procedure.
Please note that as far as I know this is not possible to retrofit without retrofiting the car wiring loom since the connections for the parking sensor module are not pre installed in cars without parking sensors.
The Part Number of the module is 8E0 919 283 and the buzzer part number is 4D0 919 279
You need to remove the rear seats 1st , in order to do this check my video on how to remove the Isofix brackets: • How To remove or insta...
Tools needed:
Phillips screwdriver PH3 and PH2
Nose pliers to aid in the buzzer removal.
Torx screwdriver T25
17mm box spanner
Background Music:
Rose by Lukrembo - / rose
Just did my buzzer….I have a 2005 Audi Allroad. Just drop down your seat as if you were putting cargo in car. Take off the chrome trim, the side panels as described and pull panel off
My A6 avant is right hand drive, so will my parking speaker be on the passenger side?
Great video btw!!👍
Hi , sorry for the late reply . Yes it should be on the passenger side.
Thanks for the reply mate, much appreciated.
I still haven't attempted the job...might get my mechanic to have a go in his workshop!😁👍
Hello,
Do you know if it's the same location for the buzzer for an a8 d2, please?
Thanks for the video!
Hi, thanks for watching.
I think it's in a different place, but I never actually touched a D2.
The info I have is from audiworld ,
www.audiworld.com/forums/a8-s8-d2-platform-discussion-8/parking-buzzer-2797356/
But if you could double check the info in the Bentley manual or similar, that would be best.
Where is it in sedan?
Hi , sorry for the late reply .
I think it's in the same place. Try to follow this tutorial : www.audiworld.com/how-tos/a/audi-how-to-replace-rear-parking-buzzer-422192