I did the same install, but I did the exhaust at the same time too! It made things a lot easier to get to the tubes on the turbo. I think my catch can causes a lot more fumes then what I want. I saw your suggestion on a work around. I'll have to try that but that thing was way hard to put on the roll bar. I'm very happy with my install except the fumes.
Great Video...! I installed an RPM catch-can on my Mav R... My leaks out the top thru the air filter almost every ride... the smell is very strong... I'm thankful for the muck of gas & moisture not going back into my motor, but the mess and the smell is a drag... RPM suggested adding part of a Scotch Brite pad into the bottom of the can to help with the slushing around, which is a total pain to put into the bottom of the can and then who wants that in a can that could, but probably won't flow back into your motor... most of my driving is at Glamis so I'm on the throttle a lot... I usually have to empty the thing every ride, otherwise there is stuff all over the place... I was wondering if you are experiencing the same thing... maybe you have a better solution... Thank You..! Dan
LOVE THE RED! Was already going to order one for my black xrs.... when I saw you pull off the old one and it had "made in china" mark on it, it made my decision easier ha ha
So please elaborate a bit as to what is it that makes this "can that holds engine blowby gasses" and that "blow off valve" that does exactly the same as all the other BOVs on the market, the best in the world?..😂😂😂
So I have a trinity blow off on my rzr pro. I have it like tightened all the way. I have ZERO idea on where I should have it adjusted if you could help? 1 rotation from tight or two, maybe all the loose?
Check out the link below to build out your cage.. and send us an email eith screenshoot of the options you want. www.glifeutv.com/products/tmw-offroad-x3-stealth-2-seat-cage?_pos=5&_sid=cb3b63cbc&_ss=r
@@GLifeUTV I have the same kit on my Mav R and after a ton of miles I think I will go with a firmer spring due to the noise. My BoV seemed to open a LOT when riding.
Great video!!! Hello from Cabo San Lucas Mexico 🇲🇽 we love the channel down here!!!
Awesome! Thank you!
I did the same install, but I did the exhaust at the same time too! It made things a lot easier to get to the tubes on the turbo. I think my catch can causes a lot more fumes then what I want. I saw your suggestion on a work around. I'll have to try that but that thing was way hard to put on the roll bar. I'm very happy with my install except the fumes.
I installed one aswell 👍👍
Love the bandaid 😂 electrical tape is my go to unless i got Krazy glue 👌 great video
Haha. If you know you know🫣😅
And that’s when they call the huda 🚔🚨on G lol for doing donas🍩😂😂
Foreals. Burning the spot🤣
@@GLifeUTV hahaha
That last part was made somewhere in Mexico 🇲🇽
Sure was🤫😅😅
Machine is lookin and sounding good 😎👍
Thanks bro
Thats what's up!
👍
Sounds really good
I think so to
Great Video...! I installed an RPM catch-can on my Mav R... My leaks out the top thru the air filter almost every ride... the smell is very strong... I'm thankful for the muck of gas & moisture not going back into my motor, but the mess and the smell is a drag... RPM suggested adding part of a Scotch Brite pad into the bottom of the can to help with the slushing around, which is a total pain to put into the bottom of the can and then who wants that in a can that could, but probably won't flow back into your motor... most of my driving is at Glamis so I'm on the throttle a lot... I usually have to empty the thing every ride, otherwise there is stuff all over the place... I was wondering if you are experiencing the same thing... maybe you have a better solution...
Thank You..! Dan
We just installed it. So haven't experienced it yet.. yea actually alot of catch cans run the stainless scrubbers inside.. this is what i would use
amzn.to/3Jf29DT
quick question, i installed the same package but for my rzr and i was wondering, can the bov get wet ?
If you plan to go thru water. Id recommend recirculating back into the intake box
giving stater bros a little sliding video jajaja
Haha. 🤫
Does your catch can straight smoke all the time. My x3 never had this much blowby. I’m thinking of moving catch can
We have spoke with Rpm on this.. this machine has a ton more blow by then the x3
LOVE THE RED! Was already going to order one for my black xrs.... when I saw you pull off the old one and it had "made in china" mark on it, it made my decision easier ha ha
So please elaborate a bit as to what is it that makes this "can that holds engine blowby gasses" and that "blow off valve" that does exactly the same as all the other BOVs on the market, the best in the world?..😂😂😂
Haha. Just a title😁
So I have a trinity blow off on my rzr pro. I have it like tightened all the way. I have ZERO idea on where I should have it adjusted if you could help? 1 rotation from tight or two, maybe all the loose?
I rarley use that bov.. normally just leave it tight
Bro thats amazing
I have a rzr 200 exhaust video coming. Hopefully this month
Ok thanks
These tunes are compatible with evp stage 3-4 ?
Is the mav r going to the sand show ?
The swap?
Did you find a solution to the fumes from the catch can? Thanks
Mav R seems to have a ton of crankcase pressure, not sure if anything has been revised yet
Straight to Jail
Right away
How much can you get me a s3 cage for or tmw delivered to Logan Ohio 43138? Awesome video byw
Check out the link below to build out your cage.. and send us an email eith screenshoot of the options you want.
www.glifeutv.com/products/tmw-offroad-x3-stealth-2-seat-cage?_pos=5&_sid=cb3b63cbc&_ss=r
Ty man I sent a message in the link
Which spring you put in it ?
I left the spring it came with in it
@@GLifeUTV I have the same kit on my Mav R and after a ton of miles I think I will go with a firmer spring due to the noise. My BoV seemed to open a LOT when riding.
Hello, Are you interested in testing our products? We would like to invite you to test the Light Tinted Half Windshield for your 2021 Can am X3 MAX EP
No thank you