CORIAN TOP, SOLID SURFACE, EDGE GLUING
HTML-код
- Опубликовано: 15 сен 2024
- Here is the way of gluing the edge to the solid surface corian tops works good for straight tops with small radius.
Two 45 degree cuts, jointed in 90 degree angle, with very little glue, and don't need to use double planks to get proper thickness
NO TE OLVIDES ,,...................cada vez que cortes algo muestranos que tipo de broca usas , por favor. exitos .
Hlw sir me corian fabricator kaam hoga kiya
Is it possible the ingredients and method of work to make a Corian marble slab, thank you
Great video, even without words.
Are those joined surfaces straight from the table-saw, or is there other prep involved? Any particular blade specs to use?
thanks! after 45 degree cut we use alcohol to wipe out the joints and that's it. The best blade that is work for me is - triple chip blade 5 degree negative teeth. And I'm raising the blade almost maximum high. In that case the cut is more straight and blade less flexible because closer to its center
MICHAEL DIY sir plz tell.me is that pvc board?
I'll reply, since your comment was in reply to mine and so it came to me...no, it's DuPont Corian, according to the video title, which is the first/oldest brand of plastic solid-surface. Much harder than PVC, and glue-able, unlike PVC.
So can we paint on pvc board?
Yes, you can paint PVC with many coatings. Check the manufacturer's application instructions for details online.
Hello, please. Is this the sticker you used? Is it acrylic?
I not really understand your question.
Here is no acrylic
What is that glue name?
Hey
where are you from
ممكن شني الماده الاصقه مع شكر
What is this material.....??????
material is - Corian solid surface
the company is Dupond
@@michaeldiy1510 thank yiu for repply. Can tell me what the components
@@PTinvest use google maybe. Because I don't know)
@@michaeldiy1510 👍
कोरियन सिट बफिग कैसे करे
please share any method for making solid surfaces and materials, thanks
Ok
I want requirement
Vaire naic
How to make solid surface?
Sir plz cl me we r dealing with corian 8135841509
How much cost for each foot,6mm
Please be informed for me how to buy your product?
Thanks
Sir plz cl me we r dealing with corian 8135841509
Me same same vark in Saudi Arabia
Wrong. Tape the entire seam with one piece of tape along the seam. Opening the v groove after you close it will give you air trapped in the seam and create voids.
One long piece alone - is not going to hold, and you don't see if the glue is coming out and you don't see if your front seam is properly closed or start opening up from force. I did a lot of joints and I also cut a lot of bevels on glued edge, and I newer have voids. If you feel your job - you are going to be good )
I'm opening and closing joint to move the glue out and spread it evenly.
Anybody can practice their own ways after knowing base or similar method
Also didn't purge the glue tip. It never mixes all the way in a fresh tip. Always waste the first bit of glue on a fresh tip. Looks like a Wilson art color.
قوالب الفيبر بتاع البرامق
Yes that's nice, very cheap and can't do a bull nose on it. That edge is weak and it is a lot cheaper to build it that way. But I'll never give someone a top like that. Mine all have th standard 2.25" solid surface straps on all the finished edges. My goodness I wish I could get away with that my clientele would go what's that? I'm not accepting that.
What glue you use?
HZ PROJECT
That one was wilsonart
Where do you get this particular glue
Está muy verde este compa. Es es. Mucha perdida de tiempo con esa cinta Y desperdicio. Con una. Sola cinta y clampear