This was the perfect tutorial for me. I have 20 pieces to resin and was literally scared to death to get started. You two are my new art heroes! All of my work is being donated to raise funds for our local Humane Society and I wanted beautiful finishes on them. Thanks again for making a video that is easy to follow (each step) and leaves nothing out.
@@MasseArtStudio I was curious, do you have a video on using ppe while using epoxy resin? Do yall have a safety video as well in regards to how to safely use epoxy resin?
@@MasseArtStudio Hello, I am using "Let's Resin" brand, and it also has a 1 to 1 ratio mixing, will this calculator also work for that brand? Also, it says you needed 9 ounces in total product, and you mentioned you needed 4oz hardener, and 4 oz resin.....that would equal to 8oz not 9oz? Just wanting to make sure I understand, because it says for my size canvas that I need 7oz.....thank you for the reply!
Lee & Jeremy Oh my goodness! I’m giving you both a big fat hug! Lee you did a fantastic job explaining everything and I thank you from the bottom of my heart. Love you guys!
Thank you Lee. This was a perfect video that I’ve been waiting for so long. You’re an excellent teacher. You made it simple, easy. You took the fear out of resining. Your camera angle when you were spreading the resin was perfect. Thank you to both of you.
This was an extremely thorough walkthrough. I've seen several resin videos and have a little experience with resining myself but this taught me a few new tricks. Great job and thanks for posting this.
Thank you so much My husband has resined for me a few times , and he said that’s the best Information he’s ever gotten on this product and how. To use it We are both so grateful THANK YOU SOO MUCH!!
This was TERRIFIC! I loved your presentation, your instruction and love for the art. I'm feeling more confident and encouraged because my first experience was disappointing. Thanks!
Hi Lee & Jeremy,glad you mentioned respirator. I don't use resin without one. Often too cold where I live to resin outside. Also because of cold climate,I let resin bottle warm up in a warm water bath before pouring it. I have found that helps.Glad that you say I only need 1/2 for 2nd coat as I've been doing same amount which works out expensive on my budget. Thank you both.
Hi my lovely laddo's. Thank you for this video. I've learnt that if I'm going to resin a piece, it needs to be on good canvas. I cheat and pour onto mdf or ply wood. I love the pieces you have just done, the resin really makes a big difference. I love you guys, you always share so as to make us better artists. Thank you.xx
Thank you so much for your tutorial. I've been afraid to resin anything, you've given me the confidence that I can do it and it can come out looking beautiful.
Well you boys have helped me once again! I did a beautiful museum wrapped piece that is just screaming for a resin finish BUT I’ve been terrified of ruining the painting! Thank you so so very much for calming my fears and teaching me all the do’s and dont’s!! Much love!! Treesie
Thank you so much for all this info. I have only been paint pouring for about 3 weeks and decided I wanted to resin the coasters I have been painting. When we did the first couple of coasters and paintings the resin has been pulling back towards the centre. I am going to get some of the isopropyl alcohol and clean them down before each time I resin. Also seeing how to repair the previous ones that have pulled in along the top edge of the sides. You have definitely given me some hope back and encouragement to carry on. My husband and myself were feeling so deflated over this issue, but tomorrow we will tackle the repairs first then carry on with the rest. 👏👏👏🤩🤩🤩❣️❣️❣️
Lee & Jeremy, this was so helpful. I just used resin for the first time. As expected, it was not perfect as I am learning. I also made sure to begin in pieces not fit to sell. I did 95% well on a canvas however not doing well on tiny pieces like ornaments. I almost tossed an 8 x 8 as it has to divots but you saved it by making this video. Now I will sand and second coat it! Thank you!!!
Hello Lee & Jeremy, I’ve been doing resin on canvases and ceramic tiles for coasters. What Ive noticed sometimes on the acrylic painted ceramic tiles…. is that when I pour resin on the tile the resin will kind off divert around a small section of tile. When I see this happening i will push more resin over to fill in that exposed section of tile. Sometimes i need to do this 4-5 times. I wipe down my tiles before I start. Why does this happen?
@@nauniesbootcampcooking6777 if you use silicone in your paint it can cause that. I haven't had that issue since I stopped using silicone if I'm going to resin it.
Thank you for this video! I’m one of those people that has wanted to try resin for a while but have been scared to mess up my paintings. Your step by step instructions are very clear and I appreciate you demonstrating how to fix it if you get a bubble or something on the dried piece. The process seems a lot easier than I thought it would be. I think I’ll give it a try this weekend! Thank you guys! Beautiful paintings as well!
Thank you so much for sharing this. It’s like you were reading my mind. I’ve been wanting to try to resin a piece. You have inspired me to give it a go. 🥰
I learned so much from this turtorial. I just did my first resin coat recently and have some places on it that needs fixed. You just showed me how to fix it. I think, no, I know I had too much resin on it. So, thank thank you so much for showing me how to fix it. What is funny is the painting looks very much like the first one you showed being resined. Much love to you both. 💕😊💕🤗💕
@@chilltunesdunne5061 They spray water on the back of the canvas so that when it dries the canvas is tight like a drum. It helps to keep the resin from pooling.
@@joallawestervelt6918 thank you. Do I spray it on when the canvass is dry. I'm new to pouring but love it and loved your video. My colours always go flat when they dry. I use modge podge glue mixed with paint and water.
Hey Guys! Thank you so much for making this video and sharing it with us! Jeremy-you were right about the notebook😁 I admit I feel intimidated by the thought of applying varnish or resin for the same reasons everyone does. And yet I love how finishing your painting takes it to a whole new level. Lee-you took the fear factor out of the process and made it much less intimidating! I feel much more confident that this is a step I can now do. I’m wondering if you have ever varnished any of your paintings (with spray or using a brush) and which finishing process do you prefer? Thank you so very much for sharing this with us! Be happy and well!
Hi Melissa! We have used both and definitely prefer the resin over a spray varnish. The resin just finishes it off so perfectly we just prefer that one.
Thank you Thank you Thank you Both of you. This is a very detailed video teaching from beginning to end. Assuming nothing and teaching everything. I've learned more watching this video than I have in a long time. You two are fantastic. ❤️
Lee and Jeremy, thank you so much for this fabulous tutorial, you covered every aspect of the process. The finished piece is outstanding. Sorry I missed this premier, but crazy weekend with all the other and I felt guilty leaving my hubby so much had to finally tear myself away and sit and have a beer with him. lol. I usually watch all your premieres it just that I am there but not chatting I just say hi to everyone. You guys are amazing, love all your videos, have watched you from the first one. Wish I could go to the fluid art experience but coming from Canada makes it a little more complicated.
I appreciate you guys so much. I want to make sure you know that always. This was a fantastic tutorial. So good. You have alleviated my major resining fears. I will say I almost had a frickin' heart attack when you hit that canvas with the sand paper!
Thanks so much! I'm one who just 'does' and figures out the better way sometimes. How seriously you treat safety with resin is SO important. Burn out one's lungs is no joke. Great work guys!
If it wasn't for you I would probably have made a mess of this. Probably not perfect but pretty darn close. Thanks for making it easier than I thought it would be Thanks for making it easier than I thought it would be..Cyd
You two are so great and so wonderful to listen to whether painting or doing a tutorial! You should consider doing audio books!💙💙 Thanks so much for doing this video on resin. I feel so much more confident moving forward. Great content! Your pieces are gorgeous and your chatter is the best ever!!Thanks so much! Be well!❤️
One more note, Gorgeous, Gorgeous, Gorgeous, end product ❤🎉❤ I'm also a native Texan from San Antonio, lived in Richardson for about 4 yrs, now living in Virginia Beach VA. & love the star of Texas behind you & you gave me idea of what to do w/my star. Thank You ❤
Are you psychic? This totally happened to me, today. After an hour the edges got uncovered with resin. Like it pooled in the center and pulled the edges in
Hi, my loves. Yes, I'm going to be one of THOSE people. Art Resin is a by volume resin, meaning you should not be measuring by weight. The hardner is heavier than the resin and therefore would measure as less volume resulting in unequal parts. Whew, that was a mouthful! I would imagine that in smaller quantities it doesn't make THAT much difference, but it can cause the resin to not cure correctly. OK, I'll step down from my soapbox now. Great video, very informative and as always, lots of fun. Love to both of my boys, xoxoxoxoox.
Hey love. You are absolutely right. But you are right again when you say that because of the small quantities it doesn’t make any difference. For the tens of paintings I have out resin on with this product not one has failed. 😊 But it is a good point none the less.
I had exactly the same question but couldn’t figure out how to word it properly so I deleted it. I was totally confused by the weighing. Anyway, nice tutorial but maybe you could add an edit to let ppl know on larger pieces you need to be more accurate. Just a suggestion.
This is the most helpful resin video I’ve ever seen! It RESINated 😉 with me more than anything I’ve watched. Thank you, thank you!! New favorite channel 😍🎨💖
This video was such a lifesaver. I’ve followed it to the T but every time I resin I get loads of pits over the canvas. I’m not sure how to get rid of these. Ive tried wiping the canvas softly with surgical spirit before doing the resin but that doesn’t completely fix it. I’m sure it’s something to do with the silicone in the paint potentially. Every tip in this video is fantastic. Thank you.
It’s absolutely the silicone. When you use silicone you have to wash it off the canvas or use isolation layers. Please search how to resin over a silicone canvas to see some tips
WHAT A WONDERFUL TEACHER YOU ARE!! AS THE PREVIOUS COMMENTER I ALSO PLAN TO DONATE ALL OF MY WORK TO RAISE FUNDS FOR THE A.S.P.C.A. I DISCOVERED THIS ACRYLIC POURING ART FORM LAST YEAR THROUGH U TUBE. I WILL BE 80 DEC.21 & I ALWAYS KNEW THERE WAS AN ARTIST IN ME. CAN'T DRAW ~~~BUT I'VE ALWAYS HAD COLORS SWIMMING IN MY BRAIN. I TELL ANYONE WHO WILL LISTEN TO WATCH A.P. VIDIO'S ~~~THEY ARE SO RELAXING & INSPIRATIONAL.LOVE U 2 GUYS
Thank you for this great tutorial step by step❤ I just founded at the right time as I'm thinking on resin my pices, this tutorial certainly motivates me. Thank you Masse Studio❤🙏
@@MasseArtStudio you are the utmost welcome. I think you are fantastic. This was my first time watching you(been watching numerous pour painting videos). Now I’m hooked, heehee
Thank you so much! My first resin was okay...but I'm going to go back and clean it up now that I know I can. Best video so far on resin! Just so thankful for this video!
Thank you, thank you, thank you! I have used resin with very few perfect outcomes and actually some of best paintings are sitting, waiting to be fixed. After this tutorial I feel confident that I can fix them. Thank you for being so detailed!
L💞💞E your video,I like the fact that you actually walked us through and taught step by step and you were talking as you were working on the project,You weren't boring like other tutorials,I like your presentations so much I started following you,Thank you for the lesson,I been wanting to learn how to work with resin for a while,But couldn't find a tutorial that kept me interested instead of bore me, I'm so happy I found you.
Thank you so much for your fabulous video. At 74 years young, I recently came across this art form and was enchanted immediately. I have to do it! It calls to me. Have however been concerned about the toxicity of resin. As well as being in the later bloom of my life, I am chemically sensitive. So grateful for a fabulous product and even more fabulous teachers.🏳🌈🦄🌈 Did have one question. Is one coat enough if there are no blemishes? Thanks for being you. SunShine
Thank you for the lovely lovely comment. So very awesome of you. And we are so glad you’re here with us on this journey. Absolutely, one coat, if there aren’t any blemishes, will be just the right amount for your canvas.
This is fantastic information. I am so grateful, because I just did my first resin over a painting and was HORRIFIED to find that it didn't stick in some spots, despite my careful cleaning. I ended up with divots and bare spots and darned near cried. So now I know I can fix it and I'm much happier. Thank you!
@@MasseArtStudio FIVE layers later, it is complete. Not as perfect as yours, but in a state I can live with. I think I may be resin challenged. I'm going to keep pouring until I've got it dialed in. Thank you for the encouragement!
Hi Guys it is great that you have gone through this process for people wanting to do their own resin, or to help anyone with issues. However, there is one very important aspect with the mixing of the resin in particular the ratio component that is not quite correct. It is why some artist use 2 cups to measure the fluid amount instead of weight. The actual ratio mix for art resin and mainly others (check manufacturers instruction) is a 1:1 part ratio ( some are 2:1). This ratio recommendation is based on Fluid volume and not a percentage or weight proportion ratio. As you are aware a 2 part resin mix there is alway one part that is thicker (higher density) than the other part. What happens when you mix by weight is you will have more fluid ounce or grams of the runnier part in your cup than the thicker part. This means you are not using a 1:1 fluid vol ratio. What should happen is you empty both bottles of the resin at the time. However if you mix on your scale by weight your bottle of the runnier part will empty first as you will be using more. Whilst some brands of resin can handle this small measurement error, some do not plus you will have leftover of one part. Also when you use a 2:1 part ratio the measurement error can have issues in curing. I learned this the hard way when I had issues and was using scales and weights to measure. I also had many frustrated conversations with manufacturers until we identified the problem of not using a fluid ratio measurement. Which means you use a fluid measuring cup to measure your equal parts preferably in 2 separate cup as they should be as exact as possible. This comment is only meant to help you. I have watched you from your beginning and know you are always eager to learn and get tips in your journey. Regards
You are so correct. But, being that we are using such small quantities of resin mixing it 1:1 ratio has never impacted the finished product. As Lee said though you should always follow the manufacturers instructions that come with the resin.
I am so glad that I came across this today. I've been wanting to use resin but was afraid of the fumes. Well this is awesome news about the resin you use. Thank you so much
Wow....Lee....how informative this video was....we artists all need to take the proper precautions and you did an excellent job of explaining every detail!!! Wonderful job and appreciate you both....Love Gramma Donna
This was the perfect tutorial for me. I have 20 pieces to resin and was literally scared to death to get started. You two are my new art heroes! All of my work is being donated to raise funds for our local Humane Society and I wanted beautiful finishes on them. Thanks again for making a video that is easy to follow (each step) and leaves nothing out.
So glad this was helpful Kathryn! So awesome what you are doing with your art!
I thank you too Lee, appreciate it, because I have been a bit afraid to use resin.
God bless you for your love of animals. Thank you
@@MasseArtStudio I was curious, do you have a video on using ppe while using epoxy resin? Do yall have a safety video as well in regards to how to safely use epoxy resin?
@@MasseArtStudio Hello, I am using "Let's Resin" brand, and it also has a 1 to 1 ratio mixing, will this calculator also work for that brand? Also, it says you needed 9 ounces in total product, and you mentioned you needed 4oz hardener, and 4 oz resin.....that would equal to 8oz not 9oz? Just wanting to make sure I understand, because it says for my size canvas that I need 7oz.....thank you for the reply!
Thank you for the wonderful information! I really appreciate your knowledge and charisma.
Gosh thank you so much. And the very last episode on the channel is an update to this very episode. That might help some too!
This is, without a doubt, the best instructional video for resining your artwork. Thank you so much ❤
You are so very welcome!
Lee & Jeremy
Oh my goodness! I’m giving you both a big fat hug!
Lee you did a fantastic job explaining everything and
I thank you from the bottom of my heart. Love you guys!
Thank you so much!
Thank you Lee. This was a perfect video that I’ve been waiting for so long. You’re an excellent teacher. You made it simple, easy. You took the fear out of resining. Your camera angle when you were spreading the resin was perfect. Thank you to both of you.
You are so welcome and thank you so much!
@@MasseArtStudio ❤️from Canada 🍁🇨🇦
Fantastic resin tutorial!! Well done my spicy boys! 👏
Thank you so very much love! You know I love to resin. ❤️
This was an extremely thorough walkthrough. I've seen several resin videos and have a little experience with resining myself but this taught me a few new tricks. Great job and thanks for posting this.
You’re so very welcome and thank you.
Thank you for showing me how to do this!!!
You’re so very welcome.
Great video Boys and perfect timing as I’m about to resin a few canvases for the first time. Very thorough and informative. Thank you!🥰
Yay!!! Goood luck. It’s not as scary as it seems
Thank you so much
My husband has resined for me a few times , and he said that’s the best
Information he’s ever gotten on this product and how. To use it
We are both so grateful
THANK YOU SOO MUCH!!
Thank you so much. I’m so glad it’s helpful
This was TERRIFIC! I loved your presentation, your instruction and love for the art. I'm feeling more confident and encouraged because my first experience was disappointing. Thanks!
Thank you so much. I am so glad you found it helpful.
Hot podge
quality! honestly Lee is one the most natural tutors I've ever had experience with. that's amazing skill to have
Oh my! That’s a wonderful thing to say. Goodness. Thank you.
Hi Lee & Jeremy,glad you mentioned respirator. I don't use resin without one. Often too cold where I live to resin outside. Also because of cold climate,I let resin bottle warm up in a warm water bath before pouring it. I have found that helps.Glad that you say I only need 1/2 for 2nd coat as I've been doing same amount which works out expensive on my budget. Thank you both.
You are so welcome mavanie! Glad it helped out!
Hi my lovely laddo's. Thank you for this video. I've learnt that if I'm going to resin a piece, it needs to be on good canvas. I cheat and pour onto mdf or ply wood. I love the pieces you have just done, the resin really makes a big difference. I love you guys, you always share so as to make us better artists. Thank you.xx
Thank you so much Linny! Just to let you know though... You can resin on plywood or MDF. Big Hugs XO
Thank you so much for this amazing lesson
You're very welcome!
Amazing job! They look absolutely incredible. Thank you for this wonderful resin tutorial as it was exceedingly helpful.
Glad it was helpful!
What a cute couple!! Loved the video. Thank you. 🙂
Thanks so much! 😊
Thank you so much for your tutorial. I've been afraid to resin anything, you've given me the confidence that I can do it and it can come out looking beautiful.
You can do it! I cant wait to hear how it turns out x
You couldn’t have done this video better! Thank you so much!
Gosh thank you so very much. I have an updated video that will air this coming Wednesday
Well you boys have helped me once again! I did a beautiful museum wrapped piece that is just screaming for a resin finish BUT I’ve been terrified of ruining the painting! Thank you so so very much for calming my fears and teaching me all the do’s and dont’s!! Much love!! Treesie
You are so welcome Treesie! Big Hugs!
Thank you so much for all this info. I have only been paint pouring for about 3 weeks and decided I wanted to resin the coasters I have been painting. When we did the first couple of coasters and paintings the resin has been pulling back towards the centre. I am going to get some of the isopropyl alcohol and clean them down before each time I resin. Also seeing how to repair the previous ones that have pulled in along the top edge of the sides. You have definitely given me some hope back and encouragement to carry on. My husband and myself were feeling so deflated over this issue, but tomorrow we will tackle the repairs first then carry on with the rest. 👏👏👏🤩🤩🤩❣️❣️❣️
FINALLY, FINALLY, FINALLY, THE ANSWERS TO ALL MY QUESTIONS AND SOLUTIONS TO ALL MY PROBLEMS THANK YOU, THANK YOU, THANK YOU! ❤
You’re so welcome. Truly. Glad to have helped
Lee & Jeremy, this was so helpful. I just used resin for the first time. As expected, it was not perfect as I am learning. I also made sure to begin in pieces not fit to sell. I did 95% well on a canvas however not doing well on tiny pieces like ornaments. I almost tossed an 8 x 8 as it has to divots but you saved it by making this video. Now I will sand and second coat it! Thank you!!!
So glad it was helpful Nadine!
Hello Lee & Jeremy, I’ve been doing resin on canvases and ceramic tiles for coasters. What Ive noticed sometimes on the acrylic painted ceramic tiles…. is that when I pour resin on the tile the resin will kind off divert around a small section of tile. When I see this happening i will push more resin over to fill in that exposed section of tile. Sometimes i need to do this 4-5 times. I wipe down my tiles before I start. Why does this happen?
@@nauniesbootcampcooking6777 if you use silicone in your paint it can cause that. I haven't had that issue since I stopped using silicone if I'm going to resin it.
I think you both are Gems and I have been blessed with the luck of having you in my path!
Thank you so much!
Love the details, now I feel more confident to try my hand at resin my art. Your art is amazing!
You’re so very awesome. Thank you for saying
Fantastic tutorial! You guys are awesome!
Thank you so very much. So glad it helped
Thank you for this video! I’m one of those people that has wanted to try resin for a while but have been scared to mess up my paintings. Your step by step instructions are very clear and I appreciate you demonstrating how to fix it if you get a bubble or something on the dried piece. The process seems a lot easier than I thought it would be. I think I’ll give it a try this weekend! Thank you guys! Beautiful paintings as well!
i hope it worked out wonderfully for you too!
This is the most thorough resin video from all the acrylic pouring peoples. 🎉
Thank you. We hope it was helpful.
Thank you so much for sharing this. It’s like you were reading my mind. I’ve been wanting to try to resin a piece. You have inspired me to give it a go. 🥰
You can do it!
I'm so so grateful I stopped to watch this. I learned so much and loved you accent and welcoming words. thankyou so much.
Thank you. I’m so glad it helped .❤️
Thank you for this!! I needed help and this was so helpful!!❤❤
You’re so very welcome
This is the best tutorial on how to apply resin. You both are the best. Thank you, K
Thank you so much Kaye!
I learned so much from this turtorial. I just did my first resin coat recently and have some places on it that needs fixed. You just showed me how to fix it. I think, no, I know I had too much resin on it. So, thank thank you so much for showing me how to fix it. What is funny is the painting looks very much like the first one you showed being resined. Much love to you both. 💕😊💕🤗💕
Of course Joalla! Glad we could help! Big Hugs!
Why do you put water on the canvass.?
@@chilltunesdunne5061 They spray water on the back of the canvas so that when it dries the canvas is tight like a drum. It helps to keep the resin from pooling.
@@joallawestervelt6918 thank you. Do I spray it on when the canvass is dry. I'm new to pouring but love it and loved your video. My colours always go flat when they dry. I use modge podge glue mixed with paint and water.
What a great video! Your entire way of instructing as well as cutting out what doesn't need to be watched just fantastic! Thankyou!!
Thank you so much, its my most watched episode and I really loved putting it together. Maybe time for an update.
The way he says Bubbles is cracking me up!
Lol. It’s the accent ❤️
Best resin tutorial I've seen yet. Thanks!
You’re so very welcome
Hey Guys! Thank you so much for making this video and sharing it with us! Jeremy-you were right about the notebook😁 I admit I feel intimidated by the thought of applying varnish or resin for the same reasons everyone does. And yet I love how finishing your painting takes it to a whole new level. Lee-you took the fear factor out of the process and made it much less intimidating! I feel much more confident that this is a step I can now do. I’m wondering if you have ever varnished any of your paintings (with spray or using a brush) and which finishing process do you prefer? Thank you so very much for sharing this with us! Be happy and well!
Hi Melissa! We have used both and definitely prefer the resin over a spray varnish. The resin just finishes it off so perfectly we just prefer that one.
Thank you Thank you Thank you Both of you. This is a very detailed video teaching from beginning to end. Assuming nothing and teaching everything. I've learned more watching this video than I have in a long time. You two are fantastic. ❤️
Thank you so very much! What a lovely thing to say
Lee and Jeremy, thank you so much for this fabulous tutorial, you covered every aspect of the process. The finished piece is outstanding. Sorry I missed this premier, but crazy weekend with all the other and I felt guilty leaving my hubby so much had to finally tear myself away and sit and have a beer with him. lol. I usually watch all your premieres it just that I am there but not chatting I just say hi to everyone. You guys are amazing, love all your videos, have watched you from the first one. Wish I could go to the fluid art experience but coming from Canada makes it a little more complicated.
Thank you so much! maybe one day we will have one in Canada! You never know!
Fantastic video ... thank you. I will have a go to do my first resin coating now, feel way more confident.
I’m so excited and we have a new resin video coming out in a couple of weeks with some updates
I appreciate you guys so much. I want to make sure you know that always. This was a fantastic tutorial. So good. You have alleviated my major resining fears. I will say I almost had a frickin' heart attack when you hit that canvas with the sand paper!
Thank you so much Elayne!
I always refer to this video. It is complete and concise on "How To Resin a Acrylic Canvas " Thank You Gents for this video. Great Tutorial !!!!!!
Thank you so much. I am so pleased its helped. I was always scared to resin, not any more. I will do an update to this video at some point soon
I’m sorry my dear friends, I won’t be able to make this one live. I’m moderating for another video, but I will watch later!! Love you Bois!!
I was wondering where one of my favorite peeps was at! All good see you at the next one Angie!
Thanks so much! I'm one who just 'does' and figures out the better way sometimes. How seriously you treat safety with resin is SO important. Burn out one's lungs is no joke. Great work guys!
You are so welcome! And thank you. ☺️👍🏻
If it wasn't for you I would probably have made a mess of this. Probably not perfect but pretty darn close. Thanks for making it easier than I thought it would be Thanks for making it easier than I thought it would be..Cyd
You two are so great and so wonderful to listen to whether painting or doing a tutorial! You should consider doing audio books!💙💙 Thanks so much for doing this video on resin. I feel so much more confident moving forward. Great content! Your pieces are gorgeous and your chatter is the best ever!!Thanks so much! Be well!❤️
Thank you so much!
One more note, Gorgeous, Gorgeous, Gorgeous, end product ❤🎉❤ I'm also a native Texan from San Antonio, lived in Richardson for about 4 yrs, now living in Virginia Beach VA. & love the star of Texas behind you & you gave me idea of what to do w/my star. Thank You ❤
Oohhhh so cool. We still love that star! It’s holding up nicely!
Are you psychic? This totally happened to me, today. After an hour the edges got uncovered with resin. Like it pooled in the center and pulled the edges in
Oohhh crazy! But at least now you have the tools to fix it. Yay!!
This is the best video I have seen on resin pour.
Gosh thank you so much. So glad you enjoyed it
Thank you so much for taking the time to teach us Lee! Blessings.
You are so welcome
This was a great informative video, thanks! Also, I am *obsessed* with the way you say "bubble" every time.
LOL Thank you .....'bubble' that one was just for you x
I learned a lot through your video. Thanks
Glad it was helpful!
Hi, my loves. Yes, I'm going to be one of THOSE people. Art Resin is a by volume resin, meaning you should not be measuring by weight. The hardner is heavier than the resin and therefore would measure as less volume resulting in unequal parts. Whew, that was a mouthful! I would imagine that in smaller quantities it doesn't make THAT much difference, but it can cause the resin to not cure correctly. OK, I'll step down from my soapbox now. Great video, very informative and as always, lots of fun. Love to both of my boys, xoxoxoxoox.
Hey love. You are absolutely right. But you are right again when you say that because of the small quantities it doesn’t make any difference. For the tens of paintings I have out resin on with this product not one has failed. 😊 But it is a good point none the less.
I had exactly the same question but couldn’t figure out how to word it properly so I deleted it. I was totally confused by the weighing. Anyway, nice tutorial but maybe you could add an edit to let ppl know on larger pieces you need to be more accurate. Just a suggestion.
Thank You both for doing this Video - I Learned All the Questions I was Wondering.. Thanks Again..
Glad it was helpful!
This is the most helpful resin video I’ve ever seen! It RESINated 😉 with me more than anything I’ve watched. Thank you, thank you!! New favorite channel 😍🎨💖
You’re so very welcome ❤️
This video was such a lifesaver. I’ve followed it to the T but every time I resin I get loads of pits over the canvas. I’m not sure how to get rid of these. Ive tried wiping the canvas softly with surgical spirit before doing the resin but that doesn’t completely fix it. I’m sure it’s something to do with the silicone in the paint potentially.
Every tip in this video is fantastic. Thank you.
It’s absolutely the silicone. When you use silicone you have to wash it off the canvas or use isolation layers. Please search how to resin over a silicone canvas to see some tips
Thank you for sharing this information, much appreciated.
You are very welcome! Glad you liked it!
Great video, Lee and Jeremy. Beautiful paintings and detailed resin tips. Grateful hugs. 🎶💞🎶
Thank you so much Jan!
I have just started out in resin . This was a perfect video to help. So practical and useful. Thank you so much
Soooo glad it helped
Great tutorial 👌 I have been nervous to use resin.
I ready to try.
Thank you you two are awsome
You can do it! Thank you for watching xx
you 2 are angels. NOBODY has ever told me about the bubble wrap issue. thank you so so much. 💓
You are so welcome!
Thank you. Excellent directions clearly delivered. Now I can get on with all I have to finish.
Glad it helped!
Thanks guys for this tutorial.❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️🕊️✌️😁🤗
Thanks for watching!
Wow! THANK YOU! I have DOZENS of pieces that need this!
You are so welcome!
I just wanted to add your painting is beautiful. Really amazing work.
Thank you so much!
Just found this video, I LOVE you guys!! ❤️❤️
I mean we love you more!!
Thank you so much for this tutorial. You have helped me!!!!
You're very welcome!
WHAT A WONDERFUL TEACHER YOU ARE!! AS THE PREVIOUS COMMENTER I ALSO PLAN TO DONATE ALL OF MY WORK TO RAISE FUNDS FOR THE A.S.P.C.A. I DISCOVERED THIS ACRYLIC POURING ART FORM LAST YEAR THROUGH U TUBE. I WILL BE 80 DEC.21 & I ALWAYS KNEW THERE WAS AN ARTIST IN ME. CAN'T DRAW ~~~BUT I'VE ALWAYS HAD COLORS SWIMMING IN MY BRAIN. I TELL ANYONE WHO WILL LISTEN TO WATCH A.P. VIDIO'S ~~~THEY ARE SO RELAXING & INSPIRATIONAL.LOVE U 2 GUYS
That’s so generous of you. How wonderful. Thank you for watching us.
Thank you sooooooooooooo much for perfect tutorial
You’re so welcome. I hope it helps
Very helpful, guys! Thank you for all the tips and in such an entertaining format. I watched every minute!
Glad you enjoyed it and found it helpful!
Thank you for this great tutorial step by step❤ I just founded at the right time as I'm thinking on resin my pices, this tutorial certainly motivates me.
Thank you Masse Studio❤🙏
You are so welcome!
What great instruction, really appreciate all the information. Trying to my never up to do my first.
You can do it!
I’ve watched several resin videos, yours is by far the best. Thank you for such excellent instructions.
Gosh thank you so very much! That makes me smile
@@MasseArtStudio you are the utmost welcome. I think you are fantastic. This was my first time watching you(been watching numerous pour painting videos). Now I’m hooked, heehee
Love this piece. I can listen to y’all all day.
Thank you so much!
Hey guys, thank you so much for sharing your info on resining a canvas. Love how you showed how to fix a canvas resin pour. ❤🎉❤😊
Our pleasure!
This is an excellent tutorial! Thank you both so much. I’m much less hesitant to try resining a piece thanks to you gentlemen!
You are so welcome and you got this!
Thank you so much! My first resin was okay...but I'm going to go back and clean it up now that I know I can. Best video so far on resin! Just so thankful for this video!
Thank you Sharon. Means so much. Thank you.
Thank you, thank you, thank you! I have used resin with very few perfect outcomes and actually some of best paintings are sitting, waiting to be fixed. After this tutorial I feel confident that I can fix them. Thank you for being so detailed!
You’re so very welcome, anything we can do to help! 😊
Thank you! I don’t do art, but am getting ready to epoxy a small wood table. This was the most informative video I’ve found.
You’re so very welcome. And thank you for being here with us
THANK YOU! I needed this 3 years ago 😆
😂😂😂 I hope it helps now
What a fan😢video. Thank you so much. It is absolutely stunning 🤩
Glad you enjoyed it!
Thank you for showing me how to do the resin... Love love, love
You are so welcome! I really hope it helped
This was amazing work. Thank you for the clear instructions on how to use resin. You really addressed my fears on using resin.
Thank you for watching. If there is anything you think I’m missing please let me know
Wow thank you for sharing all information. You did a great job on both pieces. Love your work.
Thank you so much!
L💞💞E your video,I like the fact that you actually walked us through and taught step by step and you were talking as you were working on the project,You weren't boring like other tutorials,I like your presentations so much I started following you,Thank you for the lesson,I been wanting to learn how to work with resin for a while,But couldn't find a tutorial that kept me interested instead of bore me, I'm so happy I found you.
Thank you so much!! I am so happy you found us! Means everything to have you here! ❤️
I asked the question before the end of the video. Thank you for showing how to take of those drips.
You are so very welcome
Thank you for such a thorough example. Going to try my Lazy Susan. Feel a bit more comfortable after watching your video.
You can do it!
very well explained, nothing hidden,congratulation guys
Thank you so much
❤. So helpful. Thanks so much!
You are so welcome!
What wonderful program on resin! I have watched others, but they do not include how to fix problems. Thank you so much 🥰
Glad it helped out!
Thank you so much. Great information.
You are so welcome!
Thank you so much for your fabulous video. At 74 years young, I recently came across this art form and was enchanted immediately. I have to do it! It calls to me. Have however been concerned about the toxicity of resin. As well as being in the later bloom of my life, I am chemically sensitive. So grateful for a fabulous product and even more fabulous teachers.🏳🌈🦄🌈
Did have one question. Is one coat enough if there are no blemishes? Thanks for being you. SunShine
Thank you for the lovely lovely comment. So very awesome of you. And we are so glad you’re here with us on this journey. Absolutely, one coat, if there aren’t any blemishes, will be just the right amount for your canvas.
@@MasseArtStudio thanks
I just found you guys. ❤❤❤ your channel. Can’t wait to watch all your videos. 🎉
Oh wow. Thank you for being here. Thank you for staying, watching and commenting. It means the world to us
This is fantastic information. I am so grateful, because I just did my first resin over a painting and was HORRIFIED to find that it didn't stick in some spots, despite my careful cleaning. I ended up with divots and bare spots and darned near cried. So now I know I can fix it and I'm much happier. Thank you!
You absolutely can! You got this
@@MasseArtStudio FIVE layers later, it is complete. Not as perfect as yours, but in a state I can live with. I think I may be resin challenged. I'm going to keep pouring until I've got it dialed in. Thank you for the encouragement!
AMAZING! ❤❤ Thank you
Thank you too!
Hi Lee, thank you, a wonderfully useful and practical tutorial
Very welcome
Hi Guys it is great that you have gone through this process for people wanting to do their own resin, or to help anyone with issues. However, there is one very important aspect with the mixing of the resin in particular the ratio component that is not quite correct. It is why some artist use 2 cups to measure the fluid amount instead of weight. The actual ratio mix for art resin and mainly others (check manufacturers instruction) is a 1:1 part ratio ( some are 2:1). This ratio recommendation is based on Fluid volume and not a percentage or weight proportion ratio. As you are aware a 2 part resin mix there is alway one part that is thicker (higher density) than the other part. What happens when you mix by weight is you will have more fluid ounce or grams of the runnier part in your cup than the thicker part. This means you are not using a 1:1 fluid vol ratio. What should happen is you empty both bottles of the resin at the time. However if you mix on your scale by weight your bottle of the runnier part will empty first as you will be using more. Whilst some brands of resin can handle this small measurement error, some do not plus you will have leftover of one part. Also when you use a 2:1 part ratio the measurement error can have issues in curing. I learned this the hard way when I had issues and was using scales and weights to measure. I also had many frustrated conversations with manufacturers until we identified the problem of not using a fluid ratio measurement. Which means you use a fluid measuring cup to measure your equal parts preferably in 2 separate cup as they should be as exact as possible. This comment is only meant to help you. I have watched you from your beginning and know you are always eager to learn and get tips in your journey. Regards
You are so correct. But, being that we are using such small quantities of resin mixing it 1:1 ratio has never impacted the finished product. As Lee said though you should always follow the manufacturers instructions that come with the resin.
Thanks for sharing!, Resin can be tricky, I’ve been using resin 3 yrs now, all my clients love the shine it gives, good tutorial
Thank you so much Louise! We love the way it finishes pieces off!
this was an amazingly thorough video- thank you!!!!
You’re so very welcome
I am so glad that I came across this today. I've been wanting to use resin but was afraid of the fumes. Well this is awesome news about the resin you use. Thank you so much
Glad I could help! Thank you for watching
Wow....Lee....how informative this video was....we artists all need to take the proper precautions and you did an excellent job of explaining every detail!!! Wonderful job and appreciate you both....Love Gramma Donna
Thank you! Big Hugs Gramma Donna!
This is very helpful.
Glad you think so! We love to resin