Noel Babas nice meeting you sir Noel, parang mini eb, learned a lot from out talk. I try my best to upload more diy vids for our community. We would also like to thanks for your warm accommodation and be rest assured will pass on a good word. www.booking.com/hotel/ph/noel-39-s-first-floor.html Thanks 😀 subscribe, like & share.
Nice work but, why did you keep the EGR exhaust gas cooler in place? what is the point now on heating the coolant fluid with exhaust gases that will not be used?, just remove it and put a bypass pipe instead
Sir, removing the EGR valve is going to improve the efficiency and performance of your vehicle and it is going to be a lot more powerful. For a DIYer like me it's easier for me to do this kind of blanking, I searched forums also about it. But your comment is surely appreciated and helpful to others as well Thank you 😀 Subscribe, like & share.
@@PaulAbordo thanks, can you please share your thoughts after having done it? Have you noticed better mileage for example, is the engine more responsive? If I were to do this I'd definitely have deleted the heat exchanger too and installed the blanking plate directly to the exhaust manifold. Maybe you can explore that possibility and make a second part video sharing your experience after having done what you showed here, thanks for the video
The solenoid in the EGR is stuck open, leaking under revs (noisy and severe lack of power) . I was going to find a new solenoid to replace the damaged one in the EGR but now I'm thinking of just removing the bugger and blocking it off altogether. I was warned it could build up heat and warp the alloy head but many say its not an issue??? EGR delete cable and block off plates, any reason why you haven't added the cable ?
It depends on the model of your Montero, for our model it doesn't need it to. This is based on online forums and other FB groups. Thank you 😀 Subscribe, like & share.
Hi MrSakoTRG, until now im not having any problems after the install. I think lower models is experiencing this. I do have read from various that some has the Check engine light on after. But i took a gamble since i could just re-do the install, and got nice deal with my blanking plates.
А перепрограммировать ECU не надо?)) Состав смеси и тепловая нагруженность не меняются?)) Турбина передув куда сбрасывает при отключенном ЕГР, который выполняет роль перепускного клапана турбины?
for cleaner emmisions lang naman ata yung purpose nang egr. kaya kung mag egr delete ka at papasa naman sa emmision test. edi ok. para hindi magrecirculate ang soot sa engine mo. causing microscopic wear
Jack M Hello sir usually I check lazada, shopee, facebook, if all else fails i just go to any local auto shop, here in Las Pinas near Zapote road. Thanks 😀 subscribe, like & share.
Hi sir ryan atega, try ko ho, if hindi man ako, baka yung gagawa. But ill try to do a research baka kaya kong i-diy. Thanks for the view and suggestion.
hi. are you having any engine errors? im thinking of putting a blank on mine but a lot of people are saying plate needs to have a hole at least 8mm in diameter to allow a small amount of recirculation to trick the computer & prevent engine warning light.
Yeah thats correct. A small hole (8 mm) tricks the computer into thinking everything is fine. The trade off is that a small amount of exhaust gasses will still pass into the manifold but not nearly enough to clog it up. Here in Australia alot of Mitsubishi Triton, Pajero and Challenger owners are using the 8mm option. Guys that dont are reporting engine light illumination. Some are even happy to drive around with the engine lit but I wouldnt recommend that.
Hi. no engine errors. i think it is something to do with the year model of your montero. according to some videos here in youtube lower year models experience such error. I don't have the 8mm hole. and so far no engine check error. Thanks
Jack M hi yes your montero has it also. There are shops all over the metro that is selling and installing blanking plates. But i purchased mine online, please see description. I bought mine online to save a bit for the cost and the labor charges.
For me it is, egr cleaning is expensive (for me), adding cost for my preventive maintainance. I dont actually feel any difference in performance, only thing that you will notice is the smoke coming out of your exhaust, it has a lighter color. Ill try to upload a diy cleaning of egr, since its requested here, but im still doing research if i could actually do it. And if there is really a significant benefit. Thanks 😀 Subscribe, like & share.
Sir no hizo nada con la caja de la computadora ni con ninguna configuración. Tienes razón solo las cañerías. Gracias 😀 Suscríbete, dale me gusta y comparte.
+Jessie Labadan for me sir mas okay na wag nang ilagay yung tube kase maikse na yung screw. Tinabi ko nalang sya sa lagayan ng jack sa likod para incase na masira yung plate madaling ikabit. Thanks
@@neyney5469 Minimal lang kung feel after the install. But 10 years na unit namin still okay naman. We had one EGR cleaning palang. Try ko maka gawa ng video checking the blanking plates removal. Thank you 😀 Subscribe, like and share.
@@PaulAbordo laking problema, pang 4d56T nabili ko medyo iba itsura ng isa, pero dalawa inorder ko para may magkapareho tlga ng plate. mas mura lang cya sa ecu shop na version
@@jamilwilliamcervania9681 Its the feeling of having gain due to being blank, but hardly that significant. Its more of the being cleaning part of the pipe. Thanks 😀 Subscribe, like and share.
Sir tanong ko lang....may nakapag sabi kasi sa akin na after the blanking some noticed na yun fuel filter nila naging madumi? can you confirm this? im planning to have blank yun egr ng monty ko same year model tayo
Bernard Sarmiento you mean oil filter? this is possible po since that the smoke goes back to your engine and burn it further. But following the Preventive Maintenance will still ensure the good health of your engine. Or have a better oil filter to use when tune-up time. But regarding fuel filter i don't think that this would be affected as its is a different line, but it is always best to check and change it. Thanks 😀 subscribe, like & share.
Halo sir.. good day..magkno po Ang blanking plate NG egr at saan pwede makabili? Nglagay po ba kayo NG oil catch can..? Your comments is high appreciates... Salmt po
Raymundo Jr Sabio possible its just the same with the older models, but its best to contact the seller, just read the description, the contact details is there, just inform that you got it from me. Thanks 😀 subscribe, like & share.
Raymundo Jr Sabio yes, there is someone from tsikot.com who have post the mods that he did to his montero 2016 one of which is blanking plates. You can also check it Https://www.tsikot.com/forums/mitsubishi-cars-talk-94/2016-mitsubishi-montero-101160/index168.html Just back read a bit. Thanks 😀 subscribe, like & share.
@@PaulAbordo ahh, wala kasi ako alam sa blanking. hehe pinapapalitan n kasi egr ko yun ang lumabas s scanning dhil s check engine pero sabi ng mekaniko blanking nlng nalang muna pra d daw dumumi. Pero bagong linis lang egr ko. Ty sa reply
dipo ba parang masasakal yung engine nyo nyan at makahinga ng maayos why not us OCC nalang mas madali pang install sa brother ko kasi nagpakabit ng ganyan ayung after few weeks baba makina kasi na sira yung piston may singaw daw cause ng egr blanking pumasok ata sa loob ung dirt
Parker Abegnale OCC can also be done to have performance gain.This is just a diy video on how to install the blanking plates. Unfortunate yung nangyari sa engine ng brother mo, diy din po ba or talyer? Let this be a good warning to others na may possibility na mag kaganon din sa kanilang units, so before blanking do research talaga. Thanks 😀, subscribe, like & share.
Paul Abordo talyer sya sir pinakabit pero nung pinagawa na nya kasi nasira nga dahil sa blanking dinala nya sa casa mekanik advise ng mekaniko wag magpapakabit ng egr blanking kasi masisira lng engine kasi di nakakahinga ng maayos mas ok pa magpakabit nalang ng oil catch can
Artek Balbawang so far sir i haven't had any bad or side effects to my engine and known anyone who has. But i plan to give update on the status of the blanking plates later on, if any carbon build up. Thanks 😀 subscribe, like and share.
Hi sir, sorry late reply, what i have gathered is that, it would prevent your egr to be very dirty that later on it would be a problem that you have to clean your egr which is also expensive. Some would say it would gain engine performance, but for me don't feel that much performance, but if any very minimal. There are more technical reasons but this is what i have understood. Thanks and hope you'll subscribe.
Sir so far sa samin no engine check po, and still installed parin, need to double check your model po Sir, yung iba po kase nag engine check as reading from other sources in the web po. Thank you 😀 Subscribe, like & share.
Ajai01niner for this year model po hndi sya nag check engine light on, base sa mga forums usually lower models po, but di ako sure what year models yung nag Check Engine Light. And yung merong mga air intake sensor din po. Thanks :) Subscribe, like & share.
Marvin Bustamante sir there are two ways po sa pag kakaalam ko, 1st is using a spray na mabibili from ace or handyman all you have to do is remove the plastic pipe going to your throttle body then follow the sprays instruction. 2nd option is to actually remove the Maf sensor and buy a spray clearner. Thanks 😃 Subscribe, like & share.
Sir as far as EGR Cleaning is concerned ang pag kakaalam ko dyan is 40k to 60k Kilometers dapat palinis na. There are two ways to know if you need EGR Cleaning, 1st is the physical hints, like grease or oil surrounding the EGR and near by components. 2nd is the change of idle and running feel of your engine or vibration of your cabin. Thanks :) Subscribe, like & share.
Kahit saang machine shop kayang kaya nilang gawin yan. Ibigay mo lang ung sukat nung gasket at kung gano kakapal gusto mong pagawa. Binigyan ko lang 200 ung gumawa. Stainless pa ginamit
Karl Engbino sir i haven't had the chance to bring it to a emission testing center, but according to some forums this should not pose any problem during the test and even the result. Ill keep the channel posted once that I've done the emission test. Thanks 😀 subscribe, like & share.
Paul Abordo oo nga ako dn wala pa ako madyado alam sa sasayan kse noon nung nabili ung strada namin. ang mga sinisearch ko lang eh ung mga maintenance ganun. exhaust intake
Before doing this diy, pls read how egr works and it's purpose. For diesel, our standard now is 1.2% opacity and for gasoline - CO=0.5% and HC=250hexane. Be a responsible car owner, gentlemen.
![EGR Cleaning [Montero Sports] | Do-it-Yourself EGR Cleaning Diesel System](http://i.ytimg.com/vi/WNF91L4Ezvw/mqdefault.jpg)
Nice one Paul! Keep helping fellow DIY enthusiasts with your videos. Noel from Baguio here.
Noel Babas nice meeting you sir Noel, parang mini eb, learned a lot from out talk. I try my best to upload more diy vids for our community.
We would also like to thanks for your warm accommodation and be rest assured will pass on a good word.
www.booking.com/hotel/ph/noel-39-s-first-floor.html
Thanks 😀 subscribe, like & share.
Same here Paul. Learned a lot from you. Indeed a mini eb. lol.
Would this spark an engine fault code ? Since it has sensor? Btw mine a 4jh1tc isuzu engine..
Nice work but, why did you keep the EGR exhaust gas cooler in place? what is the point now on heating the coolant fluid with exhaust gases that will not be used?, just remove it and put a bypass pipe instead
Sir, removing the EGR valve is going to improve the efficiency and performance of your vehicle and it is going to be a lot more powerful. For a DIYer like me it's easier for me to do this kind of blanking, I searched forums also about it. But your comment is surely appreciated and helpful to others as well
Thank you 😀 Subscribe, like & share.
@@PaulAbordo thanks, can you please share your thoughts after having done it? Have you noticed better mileage for example, is the engine more responsive? If I were to do this I'd definitely have deleted the heat exchanger too and installed the blanking plate directly to the exhaust manifold. Maybe you can explore that possibility and make a second part video sharing your experience after having done what you showed here, thanks for the video
The solenoid in the EGR is stuck open, leaking under revs (noisy and severe lack of power) . I was going to find a new solenoid to replace the damaged one in the EGR but now I'm thinking of just removing the bugger and blocking it off altogether. I was warned it could build up heat and warp the alloy head but many say its not an issue??? EGR delete cable and block off plates, any reason why you haven't added the cable ?
It depends on the model of your Montero, for our model it doesn't need it to. This is based on online forums and other FB groups.
Thank you 😀 Subscribe, like & share.
Hi MrSakoTRG, until now im not having any problems after the install. I think lower models is experiencing this. I do have read from various that some has the Check engine light on after. But i took a gamble since i could just re-do the install, and got nice deal with my blanking plates.
А перепрограммировать ECU не надо?)) Состав смеси и тепловая нагруженность не меняются?)) Турбина передув куда сбрасывает при отключенном ЕГР, который выполняет роль перепускного клапана турбины?
Why didnt you delete the other pipe? The one attached to the egr valve
What are the benefits of deleting the egr?
if i delete my egr pajero turbo model 1999 ...could this wont create any problem of the engine ?
Does this device make a vehicle runs better???
Yung EGR na may valve boss? Hindi ba yun kasama sa tatakpan din ng blank plates?
for cleaner emmisions lang naman ata yung purpose nang egr. kaya kung mag egr delete ka at papasa naman sa emmision test. edi ok. para hindi magrecirculate ang soot sa engine mo. causing microscopic wear
Trystan Jay Subido v
Mvm
sir. gawa rin kayo ng diy egr cleaning. very helpful diy vid.
Thinking of doing this to my 2013 mn trition how did it run with egr blockd of completely thanks for the video
Barely noticeable, but assuring that cleaning egr would be less frequent.
Thanks :) Subscribe, like & share.
Hey Paul, do you know any supplier in Phil for the Spark plugs for Montero Sport 2010?
Supermotorpinas doesn't have....
Jack M Hello sir usually I check lazada, shopee, facebook, if all else fails i just go to any local auto shop, here in Las Pinas near Zapote road.
Thanks 😀 subscribe, like & share.
Hi sir ryan atega, try ko ho, if hindi man ako, baka yung gagawa. But ill try to do a research baka kaya kong i-diy. Thanks for the view and suggestion.
hi. are you having any engine errors? im thinking of putting a blank on mine but a lot of people are saying plate needs to have a hole at least 8mm in diameter to allow a small amount of recirculation to trick the computer & prevent engine warning light.
Yeah thats correct. A small hole (8 mm) tricks the computer into thinking everything is fine. The trade off is that a small amount of exhaust gasses will still pass into the manifold but not nearly enough to clog it up. Here in Australia alot of Mitsubishi Triton, Pajero and Challenger owners are using the 8mm option. Guys that dont are reporting engine light illumination. Some are even happy to drive around with the engine lit but I wouldnt recommend that.
Hi. no engine errors. i think it is something to do with the year model of your montero. according to some videos here in youtube lower year models experience such error. I don't have the 8mm hole. and so far no engine check error. Thanks
Both plates needs a hole
Hi Paul, I have a Montero Sport 2010, is this EGR thing is on it?
Where to buy the blanking plate? in Philippines...
Jack M hi yes your montero has it also. There are shops all over the metro that is selling and installing blanking plates.
But i purchased mine online, please see description.
I bought mine online to save a bit for the cost and the labor charges.
Thanks Paul.....I take a look, but the FB page is no longer accessible....any other advise?
Paul Abordo
Jack M there is also a cellphone number, you can just give them a call or text. There are also other sellers online
Hi! Sir Paul,i had my breather disconnected to minimized the carbon build up in the intake. Is it really helpful? Please advise.thnx
For me it is, egr cleaning is expensive (for me), adding cost for my preventive maintainance. I dont actually feel any difference in performance, only thing that you will notice is the smoke coming out of your exhaust, it has a lighter color.
Ill try to upload a diy cleaning of egr, since its requested here, but im still doing research if i could actually do it. And if there is really a significant benefit.
Thanks 😀 Subscribe, like & share.
Hola lo eliminaste en la computadora??? O solo en las cañerias??
Sir no hizo nada con la caja de la computadora ni con ninguna configuración. Tienes razón solo las cañerías.
Gracias 😀 Suscríbete, dale me gusta y comparte.
Lupet.
Btw where did u buy those blanking plates?
boss for gen 3 montero, if mag egr delete ako hnde ba lalabas ung check engine?
Are we going to use the two plates for A and B? or only B?
Only A. pair of plates. So two plates only to be used. Thanks please subscribe
Hindi na po ba ibabalik yung pipe? e-cocover lang yung plate sa A at B?
+Jessie Labadan for me sir mas okay na wag nang ilagay yung tube kase maikse na yung screw. Tinabi ko nalang sya sa lagayan ng jack sa likod para incase na masira yung plate madaling ikabit. Thanks
pag naka blank paps san na papunta ang mga carbon deposit at san ka nakabili nyan blanking
Paul Abordo
Ano po advantage nyan at dis advantage kung meron?
Sir kamusta po engine after nag egr delete? May pag babago po ba?
@@neyney5469 Minimal lang kung feel after the install. But 10 years na unit namin still okay naman. We had one EGR cleaning palang. Try ko maka gawa ng video checking the blanking plates removal.
Thank you 😀 Subscribe, like and share.
@@PaulAbordo no issue sir pag nag EGR delete
same size lang ba ang dalawang plate?
Hi Sir, yes same size for both opening
Thank you 😀 Subscribe, like & share.
@@PaulAbordo laking problema, pang 4d56T nabili ko medyo iba itsura ng isa, pero dalawa inorder ko para may magkapareho tlga ng plate. mas mura lang cya sa ecu shop na version
Hi raven yaco pls see the description tnx
Is this a 4D56? I just cleaned my 4M41 and they are not the same.
Kenshin Himura yes sir if im not mistaken its 4D56T.
Thanks 😄 Subscribe, like & share.
Hello sir how about the egr motor did u remove it?
Hi Jamil no did not removed the motor.
Thank you 😀 Subscribe, like & share.
Is there a change in performance sir? Glsv variant sir?
@@jamilwilliamcervania9681 Its the feeling of having gain due to being blank, but hardly that significant. Its more of the being cleaning part of the pipe.
Thanks 😀 Subscribe, like and share.
Any problems with emmision testing sir?
@@jamilwilliamcervania9681
Sir so far no problems with emissions, always clean and follows the PMS schedule also.
Thanks 😀 Subscribe, like & share.
tanong ko lang sir, yung pipe po sa may egr valve mismo di na ba un takpan rin kasi parang papunta parin ng intake yun dba? tnx
alimar marsar sir no need na po, ito lang po yung kailangan lagyan ng blanking plate.
Thanks 😀 subscribe, like & share.
thanks po, nice video by the way.. more hp
Sir tanong ko lang....may nakapag sabi kasi sa akin na after the blanking some noticed na yun fuel filter nila naging madumi? can you confirm this? im planning to have blank yun egr ng monty ko same year model tayo
Bernard Sarmiento you mean oil filter? this is possible po since that the smoke goes back to your engine and burn it further.
But following the Preventive Maintenance will still ensure the good health of your engine. Or have a better oil filter to use when tune-up time.
But regarding fuel filter i don't think that this would be affected as its is a different line, but it is always best to check and change it.
Thanks 😀 subscribe, like & share.
where can I buy those blanking plates
Sellers Details:
-EGR Blanking Plate (ECU-Shop)
Made of thick Aluminum plate
facebook.com/supermotorpi...
Klermon Hermosura
P880.00
Free delivery
Contact no 0999-9988-959
Halo sir.. good day..magkno po Ang blanking plate NG egr at saan pwede makabili?
Nglagay po ba kayo NG oil catch can..? Your comments is high appreciates... Salmt po
meron naba blanking kit for the all new montero sport? the one with 8speed automatic?
Raymundo Jr Sabio possible its just the same with the older models, but its best to contact the seller, just read the description, the contact details is there, just inform that you got it from me.
Thanks 😀 subscribe, like & share.
Paul Abordo meaning same placement and size ng blanking plate yung lumag montero vs sa bago?
Raymundo Jr Sabio yes, there is someone from tsikot.com who have post the mods that he did to his montero 2016 one of which is blanking plates.
You can also check it
Https://www.tsikot.com/forums/mitsubishi-cars-talk-94/2016-mitsubishi-montero-101160/index168.html
Just back read a bit.
Thanks 😀 subscribe, like & share.
Kamusta naman yung usok? Umitim ba lalo o pareho pa rin?
benson b di po maitim yung usok pang idle to normal driving, may itim lang kapag biglang harurot.
Thanks :) Subscribe, like & share.
Hi sir, musta po monty nyo? Wala po ba msmang epekto sa engine ang blanking? Nagpa blanking din po kasi ako 2012 model
Sold my monty na, but from the time it was blank it had no any engine issues.
Thank you 😀 Subscribe, like and share.
@@PaulAbordo ahh, wala kasi ako alam sa blanking. hehe pinapapalitan n kasi egr ko yun ang lumabas s scanning dhil s check engine pero sabi ng mekaniko blanking nlng nalang muna pra d daw dumumi. Pero bagong linis lang egr ko. Ty sa reply
Sir saan mo binili yan blanking plates
Boss di na ba kayo nag remap?
Di po
Thank you 😀 Subscribe, like and share.
dipo ba parang masasakal yung engine nyo nyan at makahinga ng maayos why not us OCC nalang mas madali pang install sa brother ko kasi nagpakabit ng ganyan ayung after few weeks baba makina kasi na sira yung piston may singaw daw cause ng egr blanking pumasok ata sa loob ung dirt
Parker Abegnale OCC can also be done to have performance gain.This is just a diy video on how to install the blanking plates. Unfortunate yung nangyari sa engine ng brother mo, diy din po ba or talyer? Let this be a good warning to others na may possibility na mag kaganon din sa kanilang units, so before blanking do research talaga.
Thanks 😀, subscribe, like & share.
Paul Abordo talyer sya sir pinakabit pero nung pinagawa na nya kasi nasira nga dahil sa blanking dinala nya sa casa mekanik advise ng mekaniko wag magpapakabit ng egr blanking kasi masisira lng engine kasi di nakakahinga ng maayos mas ok pa magpakabit nalang ng oil catch can
Hi sir wla na po kaung ginalaw sa ecu, i mean remapping?
Sir wala na po, i think sa mga old models meron, as per mga forums and ibang videos dito sa youtube.
oil catch can + egr delete
may side effect ba ang pagkapon sa EGR???
Artek Balbawang so far sir i haven't had any bad or side effects to my engine and known anyone who has.
But i plan to give update on the status of the blanking plates later on, if any carbon build up.
Thanks 😀 subscribe, like and share.
Ok👍 sabi kasi nila uusok daw sasakyan. Pero modelo sasakyan mo sir. Subscribed
Artek Balbawang sir so far one of the benefits is clear to white smoke instead of black smoke ang lumalabas sa tambutso. GLS V 2014 po.
Thank you😊
Paul Abordo happy modding sir ☺
whats the reason for blocking the egr?
Hi sir, sorry late reply, what i have gathered is that, it would prevent your egr to be very dirty that later on it would be a problem that you have to clean your egr which is also expensive. Some would say it would gain engine performance, but for me don't feel that much performance, but if any very minimal. There are more technical reasons but this is what i have understood. Thanks and hope you'll subscribe.
btw if the egr gets dirty the check engine light always comes on right?
+rtcivic i haven't gone that far sir, but my next change oil i will check to the carbon build up if any and also post a video. Thanks
what year is your montero? i had my egr cleaned on my pajero bk because the check engine light comes on, after cleaning the check engine light stops.
+rtcivic 2014 sir, may i ask how much was the cost of the cleaning? And where it was done? Thanks
D ba nag check engine light?
Sir so far sa samin no engine check po, and still installed parin, need to double check your model po Sir, yung iba po kase nag engine check as reading from other sources in the web po.
Thank you 😀 Subscribe, like & share.
2012model po akin sa sakyan montero glsv
Boss baka naitagonmo pa yang pipe mo bilhin ko nalang po
Sir binalik na po namin, after cleaning the egr. Maraming option naman po sa market.
Thank you 😀 Subscribe, like & share.
Wala po ba CEL?
Ajai01niner what do you mean?
Thanks :) Subscribe, like & share.
Check engine light po. Hindi po ba nag illuminate?
Ajai01niner for this year model po hndi sya nag check engine light on, base sa mga forums usually lower models po, but di ako sure what year models yung nag Check Engine Light.
And yung merong mga air intake sensor din po.
Thanks :) Subscribe, like & share.
Hindi nmn po ba lumakas usok sa katagalan?
Di naman po, still going and no problem po.
😀 Thank you subscribe, like & share
@@PaulAbordo 5 years ago ung vlog sir, so fat so good until now?
@@jerrydurias9610 Yes Sir my parents still using it po
👍👍👍 thanks
Sir paano po linisin maf sensor montero?tnx
Marvin Bustamante sir there are two ways po sa pag kakaalam ko, 1st is using a spray na mabibili from ace or handyman all you have to do is remove the plastic pipe going to your throttle body then follow the sprays instruction. 2nd option is to actually remove the Maf sensor and buy a spray clearner.
Thanks 😃 Subscribe, like & share.
ilang kilometro po ba maglilinis ng egr sir? at pano malalaman na need na linisan?
Sir as far as EGR Cleaning is concerned ang pag kakaalam ko dyan is 40k to 60k Kilometers dapat palinis na. There are two ways to know if you need EGR Cleaning, 1st is the physical hints, like grease or oil surrounding the EGR and near by components. 2nd is the change of idle and running feel of your engine or vibration of your cabin.
Thanks :) Subscribe, like & share.
San makakakuha ng blanking plate
Boyet Pablo sir please see description, dun ko po na bili blanking plate ko, full details naman ho.
Thanks 😀 Subscribe, like & share.
Sir anong model po na montero yan
2014 po
+Paul Abordo ah sige sir tnx
+Killer Gang np, hope you subscribe tnx
pagawa nalang kayo ng blanking plate sa mga machine shop mura lang
Carlo Antonio Vigo sir pa share naman ho kung how much, anong material and ano pong shop pwede mag pagawa.
Thanks 😀 subscribe, like & share.
Kahit saang machine shop kayang kaya nilang gawin yan. Ibigay mo lang ung sukat nung gasket at kung gano kakapal gusto mong pagawa. Binigyan ko lang 200 ung gumawa. Stainless pa ginamit
Carlo Antonio Vigo I think kaya nung mga gmagawa nang muffler bro
pumasa naman sir sa emission?
Karl Engbino sir i haven't had the chance to bring it to a emission testing center, but according to some forums this should not pose any problem during the test and even the result.
Ill keep the channel posted once that I've done the emission test.
Thanks 😀 subscribe, like & share.
Paul Abordo bro gano na katagal na delete egr mo
Trystan Jay Subido sir 1year na ho mahigit. But given a chance sana maaga palang nag lagay na ho ako.
Thanks 😀 subscribe, like & share.
Paul Abordo oo nga ako dn wala pa ako madyado alam sa sasayan kse noon nung nabili ung strada namin. ang mga sinisearch ko lang eh ung mga maintenance ganun. exhaust intake
Paul Abordo nabawasan ba usok bro?
Before doing this diy, pls read how egr works and it's purpose. For diesel, our standard now is 1.2% opacity and for gasoline - CO=0.5% and HC=250hexane. Be a responsible car owner, gentlemen.
คุณอุดไม่ทั้งระบบ