That's awesome to hear! We will have more content regarding meshtatsic in the future, and stay tuned, Meshtastic 2.0 is going to be released soon and it will be really awesome with new features!
Yes. Very nice. Since it is an ESP32 it uses more power but can be used connected to Wifi compared to the NR52 (if I got that correctly), esp32 used as a router and send data via the web.
Have you considered a textured G10 for the side pieces? Similar properties to carbon fiber, but may provide better grip, especially in adverse environments
a design choice i likely would have made, was an external battery option. with maybe a small internal battery so you can hot swap the large external one. but otherwise really cool device, might try making something similar, but with my own tweaks and requirements.
Love this and I’m totally gonna build myself one. Also, you mentioned in here that you’re planning on coming out with a new design? Is there any progress you could share with us?
You've covered a lot of ground here, but I'm too lazy to watch the video again. Is this doing Voice or just text messaging or both? ISTM this is kind of critical and should be front and center so we'll know easily. Also, there's literally not a single closeup shot of the front that isn't at a weird angle. Maybe you could add some better clips of that area? I agree though, project does look very cool.
I'm a volunteer sar guy, is there an way I can work with this? My mind is blown! I'll assist with feedback you can ask me anything you want. I'm currently integrating with atak. Let's get in contact I can assist with r&d.
Howdy. So I'm a senior communications & telecommunications network engineer specialising in the design, implementation, supply & commissioning of Rural, Regional & Remote Communications & telecommunications networks, I've been in the communications & telecommunications industry for over 35 years & I'm trying to work out & or undemand what the actual use case is for Meshtastic over already existing voice networks both Analogue & Digital both encrypted & in the clear & I have to say I'm very hard pressed to come up with a use. Case. Looking forward to peoples feedback.
i love your case design, but its a brick. its even bigger (thickness) than a popular VHF/UHF radio. for a static node its alright, but for personal use it would be a pain to haul.
@@BangBangBang. yes? am sure there are plenty of very practical uses for it. i was only commenting my own views into this. i am not saying all nodes should be 50grams and maximum 3cmX3cmX1cm... obviously having different choice available is always better.
just found your vids & I'm impressed! Here's a TROPHY🏆& #1🥇Medal!😎 🔹In all Seriousness, *It's amazing what a DIY FPV drone builder or Average Nerd🤓 can accomplish with a couple cheap PCB's & Open Source firmware, What a great time to be alive! Also, I've been following the Ukraine war everyday & IMO tech like this is making a difference out there for the tech savvy Ukrainians! Lastly, have you by chance played around with any of the open-source passive radar systems? I was checking that out & it uses nearby existing AM FM radio to detect aircraft nearby... If you haven't seen it you should check it out! Ok, sorry for rambling... Thanks for the content!
Brother we need to talk. This is exactly what my group of guys need. With some minor upgrades. We are willing to pay $200 a piece if it meets the qualifications. Can you assist. You need an instagram, and a go fund me or something.
Build tutorial is out! Be sure to check it out!: ruclips.net/video/so7PC6OJdbI/видео.html
So cool! Much love! Whoof!
this looks sick, i have never heard of meshtastic before but i am def going to get a meshtastic radio now!
That's awesome to hear! We will have more content regarding meshtatsic in the future, and stay tuned, Meshtastic 2.0 is going to be released soon and it will be really awesome with new features!
Nice man, while you’re at it, grab 20 lol. They’re ‘funner’ that way 😂
Very cool project! I am looking forward to seeing where it goes.
Found you on twitter, love the channel.
Yes. Very nice. Since it is an ESP32 it uses more power but can be used connected to Wifi compared to the NR52 (if I got that correctly), esp32 used as a router and send data via the web.
Have you considered a textured G10 for the side pieces? Similar properties to carbon fiber, but may provide better grip, especially in adverse environments
a design choice i likely would have made, was an external battery option. with maybe a small internal battery so you can hot swap the large external one. but otherwise really cool device, might try making something similar, but with my own tweaks and requirements.
Love this and I’m totally gonna build myself one. Also, you mentioned in here that you’re planning on coming out with a new design? Is there any progress you could share with us?
Awesome man! Enjoyed the vid!
Do you guys sell complete kits?
Very well done. Keep it up.
Looks sick 👀👀
You've covered a lot of ground here, but I'm too lazy to watch the video again. Is this doing Voice or just text messaging or both? ISTM this is kind of critical and should be front and center so we'll know easily.
Also, there's literally not a single closeup shot of the front that isn't at a weird angle. Maybe you could add some better clips of that area?
I agree though, project does look very cool.
Hi Brad, meshtastic is a LoRa Messaging system, it’s not voice at all .
Make the plug for the Boafeng 2 pin or Ken wood options to,take peltors and other head gear
Why are all these devices partly selfbuild. ? Can I order a finished product please with a case etc. Or can someone build me two?
Can you tell us about that little radio that is a replacement for the T-Beam?
I love the idea, but am not sure if I am able to do this...further, I do not have 3d capability.
Update on V2?
What size jumper wire did you use for the OLED?
Will anyone be selling these complete already?
Perhaps in the future, atm it's fully open sourced for the community to build and modify on their own
Well done! Id like to build this🎉
When will you start selling this thing?
Type C. Pretty please?
noted, we'll add that to V2 ;)
Any idea when the tutorial will be released?
Soon, we're working on it! The lab has been really busy past few weeks
looks sick
I'm a volunteer sar guy, is there an way I can work with this? My mind is blown! I'll assist with feedback you can ask me anything you want. I'm currently integrating with atak. Let's get in contact I can assist with r&d.
We have had several people in SAR showing interest for this project, feel free to reach out via our contact form on our website!
@@CanineDefenseTechnologies will do!
Selling this would be very lucrative for you, I'm sure. So those of us who don't have a 3D printer can get one.
Absolutely I would buy 10 right now, Ive got several working now but these are definitely a step up
Howdy.
So I'm a senior communications & telecommunications network engineer specialising in the design, implementation, supply & commissioning of Rural, Regional & Remote Communications & telecommunications networks, I've been in the communications & telecommunications industry for over 35 years & I'm trying to work out & or undemand what the actual use case is for Meshtastic over already existing voice networks both Analogue & Digital both encrypted & in the clear & I have to say I'm very hard pressed to come up with a use. Case.
Looking forward to peoples feedback.
What is an example of an existing encrypted network?
What is an example of an existing encrypted network?
i love your case design, but its a brick. its even bigger (thickness) than a popular VHF/UHF radio. for a static node its alright, but for personal use it would be a pain to haul.
Do you realize how long the battery lasts?
@@BangBangBang. yes? am sure there are plenty of very practical uses for it. i was only commenting my own views into this. i am not saying all nodes should be 50grams and maximum 3cmX3cmX1cm... obviously having different choice available is always better.
Can you put it in a TVC ROCKET! 😱😁🤪🤣👍🇺🇸
Possibly for GPS recovery, not practical but worth exploring
@@CanineDefenseTechnologies WooooHOOOOOooooo! 😁👍🇺🇸
What happened to this guy? No videos in over a year.
Lots of work we haven't shared yet!
dude… can we talk to your head please?
This video is hilariously badly done 😩
Thanks for the feedback. This was my first time making a video like this. Anyway I can improve?
just found your vids & I'm impressed!
Here's a TROPHY🏆& #1🥇Medal!😎
🔹In all Seriousness,
*It's amazing what a DIY FPV drone builder or Average Nerd🤓 can accomplish with a couple cheap PCB's & Open Source firmware, What a great time to be alive!
Also, I've been following the Ukraine war everyday & IMO tech like this is making a difference out there for the tech savvy Ukrainians!
Lastly, have you by chance played around with any of the open-source passive radar systems?
I was checking that out & it uses nearby existing AM FM radio to detect aircraft nearby... If you haven't seen it you should check it out!
Ok, sorry for rambling... Thanks for the content!
Brother we need to talk. This is exactly what my group of guys need. With some minor upgrades. We are willing to pay $200 a piece if it meets the qualifications. Can you assist. You need an instagram, and a go fund me or something.