Infiniti JX35/QX60 Change Fog Lights/LED Upgrade
HTML-код
- Опубликовано: 17 ноя 2024
- Do you own an Infiniti JX35 / QX60, and are looking to either change a burnt out H11 Fog Light blub, or upgrade to LEDs? Well, either way, this video is for you. It will walk you through the step by step procedures, what tools you'll need, and the before and after results for the LEDs.
Need some supplies? Get them here
H11 standard bulb - amzn.to/3jYG11U
H11 LED - amzn.to/2FgFZU4
Disclaimer
I assume no liability for property or vehicular damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working with any and all tools, including but not limited to electrical tools, power tools, pneumatic tools, any lifting apparatus, including jacks, jack stands, and automotive lifts, manual tools, chemicals, lubricants, and any other instruments used within the video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of all above mentioned tools or equipment, or any other items mentioned above, and all information contained in this video is the sole responsibility of the user and not myself or Nexus Auto. Caution is advised and any practices by the viewer is at user discretion. Any tool or part recommendations or links are given for informational purposes only and it should be assumed to be bought at your own risk. I or Nexus Auto assumes no liability for any damages, premature part failures, or incorrect parts made from purchases made online, including but not limited to tools, parts, instruments, jacks, chemicals, lubricants, etc.
Another well done tutorial in your usual and thorough style.
One piece of advice I offer is when replacing with glass bulbs ( aka, incandescent ) is to either NOT touch the glass envelope or wipe it down after connected and before insertion with alcohol or some other solvent. The reason is that oils and grease ( even from your skin ) can decrease the life of the bulb. It concentrates heat in those areas. This comes from the Audio / Visual world where this is a real world problem. I've always practiced this all my automotive career and it works well.
Absolutely! That is about the best advice anyone can get when installing bulbs! Thanks for posting and the great feedback too!
thank you for this video. I was able to change both bulbs in under 20 min.
@@modernvintagelifestyles awesome news! Great to hear the video helped out!
Really helped me with upgrading my fog lights to Leads, that rubber gromit was a real pain but persisting at it got it out eventually😅 many thanks!
You're welcome! Happy to hear that the video was helpful! Those rubber gromits can be annoying for sure!
Excellent job displaying and describing the process.
Awesome, glad the video is helpful. Thanks for leaving the great feedback!
Awesome advice! Super well explained. Top notch
Thanks! Much appreciated.
Looks pretty clear cut! Thank you so much.
Do you happen to have a video on replacing the driver side front parking sensor?
No problem at all. Unfortunately, I do not have a video on the parking sensors at this time
Thank you very much and would you also tell me what kind of bulbs I need for main light? H11 for fog I got that
For main light, do you mean the headlight? If so, that is a D2S bulb
Thank you!! I was able to do it on my own
That's awesome news. Happy to hear the video helped out
Thanks pal! 😊
@@arthurhampson4306 no problem!
How would I remove the entire fog light? Not just bulb but the whole fog light piece. I'm installing an angel eye while piece.
I am not 100% sure if it is the same on the EX(and I think it most likely will be though), but there is 2 bolts that hold the fog lamps in place. You have to access it from the back, just like you do with the bulb. I would be easier to remove the entire lower cover to get to it.
Good job!!
Thanks!
My 2015 qx60 is making grinding noise when making sharp turns that comes and goes specially from idle. Diagnosed as diferencial problem but dealership won't fix it they concluded its front brake rotors problem. Have you encounter this trouble? Grinding sounds like coming from rear end.
Hmmm. I haven't encountered that personally. I have a few questions.
So, at idle, it's when you turn the wheel, you hear this grinding noise?
Also, at faster speeds, the noise beces quieter when turning the wheel?
All the noise comes from the rear of the car?
I get the dealership said it's the front brakes, but who diagnosed it as a differential issue? Did the dealer do that too?
Where could these LED bulbs be found? also are they still working? as in not burned out yet? thank you.
I bought them Amazon. Most parts stores sell them, along with many only stores. The old and new bulbs all still worked. I only changed them to LEDs as I like the bright white. I tend to upgrade lighting on all my vehicles.
thank you , I might just be able to do this myself without getting charged up from some mechanic..!!!
Awesome! I am confident you will be able to get it done, and save a bundle too. This is not the cheapest job at some mechanics. Good luck, and thanks for watching!
Are the led bulbs just plug and play? Or do you need a special conversion kit?
These bulbs are completely plug and play
Thank you, will definitely upgrade mine. 👍 is it possible to change the headlights to LEDs too?
No problem. Glad the video helped. It is possible to change the bulbs to LED, but I am not sure if they will truly make a difference. I am hoping to have a LED headlight comparison sometime in the spring.
Hey man sorry to bother with this question.. does this same approach work for a ‘17 Q50? May be a dumb question. Thanks so much for your time!
No bother, John.
It's not quite like this Infiniti Q50, from what I see. It is a bit closer to this vehicle
ruclips.net/video/mCqud_GFU8c/видео.html
This is a video from a Chevy Equinox. Although very different vehicles, you have to go in from the same spot, the inner fender liner. The bolts and clips will be different, but the idea is the same. Hopefully it helps give some direction. I have not work on the 17 Q50 at this time, so I can't compare. But this is based on the info I pulled. Hope that helps.
My head lights are just garbage I’m looking to put the most legal and brightest headlight bulb as possible can you please assist ???
@havoc8737 unfortunately, I can't...at this point. It's a very common complaint on these models. I will be looking to explore some options some time in the future, but haven't gotten to that yet, so I don't have any particular recommendations at this time
Is a jack needed for this replacement?
Depends on how big you are lol. If you're skinny or nimble enough, you don't need a jack
Does the Ballas work for both the fog lamps and the headlights
The ballast only works for the headlights. The fog lights do not use a ballast
Thank you again! You’re awesome! 👏🏻👏🏻
No problem! Love seeing multiple videos help out! Keep an eye out, I will have various others in the future! Thanks again for the feedback!
Thanks for the video
No problem at all. Glad it helped out
Excellent. Will this be the same for a 2015 Infiniti q50?
Unfortunately, not quite. I think you have go through the wheel fender to get to those bulbs. You have to remove the inner wheel well liner(or at least loosen it enough) to gain access
@@NexusAuto Thanks. I changed a side marker on my q40 before it got totaled in a wreck but i have never done a fog light. Thanks for the vid.....
@@NexusAuto I guess I should have clarified that. I had a q40 and I had to remove the wheel and as you said pull back the liner to access the bulb. thanks.
@@dirtdiver17 Ah gotcha. I think it should be the same as the Q40, more or less. But damn, sorry to hear about the wreck. That sucks. At least you're still here and working on your Q50.
@@NexusAuto the 2015 q50 fog assembly has to be replaced...the assembly was loose and not set in place...
Do you know what size are the day time running lights in the QX 60 and do you have any link to suggest from amazon to buy the led bulb for day time running
Are you talking about the bulb that is inside the fog light housing, on top of the fog light?
Great tutorial!!! Thanks!
No problem. Glad it helped!
Can this be used for a qx50 infiniti 2015
What year QX50?
@@NexusAuto 2015.
@@deathnote7467 unfortunately, it is a bit different to the qx60.
Check this video out
ruclips.net/video/mCqud_GFU8c/видео.html
Although this is a different vehicle, a chevy equinox, the methodology is the same. You have to remove (or loosen the front half) of the fender liner and you are actually going in from behind the fender, as opposed to the qx60, where you go from underneath.
Hope this helps a little
Can I get a aftermarket fog light bulb?
Yep you can. They are an H11 bulb, and you can use an aftermarket standard or LED bulb. I have some bulbs listed in the description, but you can try any regular H11 bulb
The covers on my fogs are awful, and faded on the inside. So, make sure you look at this also, when changing bulbs. I'll have to replace them in the future.
Good point. If you are changing the bulbs, it's a good time to get some fresh housings in. Thanks for sharing...very useful for viewers!
Where can you find the name of and the type of bulb? I have a q50
Unfortunately, the q50 has LED headlights, so they are not replaceable by people like us! It sucks, I know. Either you have to bring it to an LED specialist who can open the headlight and replace the LEDs, or sorry to say, you have to get a whole new headlight. Which is very very costly!
Nexus Auto holy cow
*face palm* my bulb blew so im trying to find a way to avoid the dealer or spending money elsewhere. Thanks for the reply.
@@najranthompson9940 yeah I hear ya, I avoid them at all costs! But sometimes, you have no choice! If you can get a headlight off of eBay or a junkyard, you will luck out there. But you will still have to take apart the front end to change it!! Crazy!!
No problem with the reply. Hopefully it helped a bit. And good luck with getting it sorted!
Nexus Auto actually one more thing, i meant to say for the fog light bulb.... 🤔 i can replace the fog light bulb myself right?
@@najranthompson9940 it is LEDs as well, so same as before, you have to buy the whole fog light assembly, not just the bulb. I haven't done it before, but I'm fairly certain you can replace that on your own from underneath. Although different, on my jx35, I need to remove the cover underneath and I can get to it, like in the video. But I just moved the panel aside, whereas I think you will need to remove it completely, disconnect the fog light, and install the new one. But it will have to be the whole housing
You changed the bulb. However, they’re still not coming on.
When you said 'you'...did you mean you changed the bulb? Or are you talking about my video? I just want to clarify what you're asking