I will say this... I've had a growatt 24v system for years now and it hasn't skipped a beat. But.... they need to do a better job with the wiring box and terminals.
Bought a house with 3 x 5kw growatt system that was about 2 years old. 1 inverter kept faulting and something popped after I switched everything off and back on again, and that was about two weeks after moving in. Another one popped about a year later, fortunately just before I replaced the popped one. I replaced them all with a 16kw Sunsynk. Will never use growatt again. Also, the support here in South Africa is very poor.
Hi! If you're needing support, please don't hesitate to reach out to our tech support department at 903-441-2090 or if you're having trouble connecting with them, you can email us directly at engagement@signaturesolar.com and we can get you connected!
I don't know about that switch, but for others reading this the relevant code rules are NFPA 70 480.7 "DC Disconnect Methods" and 690.12 "Rapid Shutdown of PV Systems on Buildings"
Is that 10k shared between 120 phases 5k/5k, or is the full 10k available on each like in the EG4 18K? Up to the max 10 total of course, I'm not asking if it can do 20k.
Is it three phase or single phase? Firstly, do these things and secondly, will it work without battery and will it provide current to the house from direct solar?
Looking at installing this inverter in a 50amp RV and using the Onan 5500 watt 120v, currently wired backup for extended grid down. Solar will be later. Looking for a full kit on Sinature Solar's website.
10K shared between both legs so 5k/5k. Let us know if you have any other questions! View the full specs here: signaturesolar.com/growatt-10kw-hybrid-inverter-sph-10000tl-hu-us/
Who makes this with built in breakers? I know sungold and nhx have a 10kw with 4x mppt, but, I haven't seen one of these with built in breakers and higher surge?
Hi! If you're needing support, please don't hesitate to reach out at 903-441-2090 and we will do our best to assist, or get you connected with the manufacturer.
Hi! I believe most of the Growatt units we sell are able to be used in 240v 50hz, if you'd like to give our tech team a call at 903-441-2090, we can help you find a solution!
Hi there! It's currently priced at $2499.00. For more information or to purchase visit: signaturesolar.com/growatt-10kw-hybrid-inverter-sph-10000tl-hu-us
I suggest you send out a few to youtubers to get a more indept review and a better look at this inverter i have a growatt 6kw it's realy noisie and it's not stackable
Have to agree on the connections 100%. But for the boards, I would rather have sister boards like this for a few reasons. Basic boards like this get you that extra 8% energy, They also give you the 20-40 less power consumption But most of all this make it so you can repair the inverter at home
If you need help setting up your unit, you can reach out to our Tech department at 903-441-2090. Let us know if you need anything else; we are happy to help!
Wow. I can buy three of these for one solark 15k. Game over for solark
What about the capacitors that will need replaced in several years? None of the inverter manufacturers mention this.
I will say this... I've had a growatt 24v system for years now and it hasn't skipped a beat. But.... they need to do a better job with the wiring box and terminals.
Bought a house with 3 x 5kw growatt system that was about 2 years old. 1 inverter kept faulting and something popped after I switched everything off and back on again, and that was about two weeks after moving in. Another one popped about a year later, fortunately just before I replaced the popped one. I replaced them all with a 16kw Sunsynk. Will never use growatt again. Also, the support here in South Africa is very poor.
Hi! If you're needing support, please don't hesitate to reach out to our tech support department at 903-441-2090 or if you're having trouble connecting with them, you can email us directly at engagement@signaturesolar.com and we can get you connected!
Pls do a video on the details of its zero export features
Hi Kelly, please make an installation video for this Growatt 10Kw hybrid inverter single phase. Thank you
Great suggestion!
Does the RSD remote emergency button also shut down the inverter AC output if power is sourced from the batteries?
I don't know about that switch, but for others reading this the relevant code rules are NFPA 70 480.7 "DC Disconnect Methods" and 690.12 "Rapid Shutdown of PV Systems on Buildings"
Does it have an autotransformer?
Is that 10k shared between 120 phases 5k/5k, or is the full 10k available on each like in the EG4 18K? Up to the max 10 total of course, I'm not asking if it can do 20k.
likely 5k/5k.
10K shared between both legs so 5k/5k. Let us know if you have any questions.
Whats the idle consumption?
The spec sheet says "Self-consumption < 60 watts".
@@surfcow -- twice what my two 5K Victron's idle at.
The self-consumption is < 60 W. If you have any additional questions, feel free to let us know, we are happy to help!
Is it three phase or single phase? Firstly, do these things and secondly, will it work without battery and will it provide current to the house from direct solar?
It features a split-phase output, providing both 120V and 240V AC
@@SignatureSolar so does it power loads direct from PV, or does all power route through the battery?
Does it do AC coupling? Can you integrate existing grid-tie inverters into the generator port like the EG4 12k does?
Yes, it has ac coupling
Looking at installing this inverter in a 50amp RV and using the Onan 5500 watt 120v, currently wired backup for extended grid down. Solar will be later. Looking for a full kit on Sinature Solar's website.
We will have kits available soon with this inverter!
Looks really good for the price. I'm just surprised there are no breakers tho
Kindly advise if you have Growatt in South Africa?
Can we have all 10kw on 240v phase?
10K shared between both legs so 5k/5k. Let us know if you have any other questions! View the full specs here: signaturesolar.com/growatt-10kw-hybrid-inverter-sph-10000tl-hu-us/
I want to get one ..😊
Where’s the breakers? These 10k copies are all over the place for 2k with breakers and some with 4 mppts and better surge
Who makes this with built in breakers? I know sungold and nhx have a 10kw with 4x mppt, but, I haven't seen one of these with built in breakers and higher surge?
No customer service I have a growatt can't get a remote control for mine but there's a slot for it
Hi! If you're needing support, please don't hesitate to reach out at 903-441-2090 and we will do our best to assist, or get you connected with the manufacturer.
Can you send me details of growwatt 20 kw inverter
Get it on the website.
So, there are no built-in in breakers like the EG4 inverters....
So much easier to install and less clutter.
I am looking for a solution to be used in Asian 240V 50Hz. Can you assist?
Hi! I believe most of the Growatt units we sell are able to be used in 240v 50hz, if you'd like to give our tech team a call at 903-441-2090, we can help you find a solution!
What it's price?
Hi there! It's currently priced at $2499.00. For more information or to purchase visit: signaturesolar.com/growatt-10kw-hybrid-inverter-sph-10000tl-hu-us
I suggest you send out a few to youtubers to get a more indept review and a better look at this inverter i have a growatt 6kw it's realy noisie and it's not stackable
Thanks for the great tip! We work with some incredible affiliates, so you can definitely expect more content coming your way in the future!
No thank you! Those green push in connectors are garbage! Plus, the circuit board looks like a high school science project!
Have to agree on the connections 100%. But for the boards, I would rather have sister boards like this for a few reasons. Basic boards like this get you that extra 8% energy, They also give you the 20-40 less power consumption But most of all this make it so you can repair the inverter at home
Millions of inverters use the same exact connectors with no issues
@@jl9678 -- there are lots of people having issues with those and in time they will be phased out. Victron has already started to eliminate them.
Still waiting on review from outside source
Poor performance in 10 kw hybrid model, we open brand new and not working properly.when asked service center they says it needs software updation.
If you need help setting up your unit, you can reach out to our Tech department at 903-441-2090. Let us know if you need anything else; we are happy to help!
Is it weatherproof
Yes. IP65
How much ?
$2,499.00